The ARC MT-037F/R 24H Straight-Pull Center Lock Road Disc Hub Set is built around a decision many wheelset programs face late in development: should the hub carry a 36T or a 54T ratchet? Both versions share the same 24-hole straight-pull shell, Center Lock rotor mount and 12×100mm front / 12×142mm rear thru-axle spacing, so the ratchet choice can be made without reopening the frame, fork or spoke plan. What changes is pickup character, and that should be matched to how the wheelset is positioned rather than picked by habit. ARC manufactures this hub set with either tooth count, which means the specification conversation can start from the intended ride feel and work back to a confirmed bill of materials.
What the 24H Straight-Pull Center Lock Layout Means for a Road Disc Build
The 24H straight-pull configuration fixes several things at once. Twenty-four spokes front and rear is a deliberate road disc choice: enough spoke count to distribute braking and pedaling loads through a disc-brake wheel, while keeping the build light and the spoke bed simple. Straight-pull spokes seat directly into the flange without a J-bend, which removes the bend as a flex and fatigue point and makes tension more consistent during lacing — a practical benefit when a builder is producing repeatable wheels rather than one-offs.
The Center Lock interface is the other fixed element. Rotors mount via a splined lockring rather than six bolts, which simplifies assembly and keeps rotor change consistent across a wheelset range. Because the interface is defined by the standard, the hub flange and spoke layout are designed around it from the start, so the buyer is not adapting a six-bolt hub later.
ARC builds this hub set with a precision-machined AL6061-T6 aluminum shell and an AL7075 aluminum axle, freehub body and end caps. Those material choices are worth reading as a specification, not a performance guarantee: AL6061-T6 is a common structural aluminum for hub shells, and AL7075 offers higher strength in the axle and freehub where loads concentrate. The 12×100mm front and 12×142mm rear thru-axle spacing aligns with current road disc frames and forks, but it should still be checked against the actual frame program — spacing standards are only useful once the dropout specification is confirmed.
36T vs 54T Ratchet Engagement: What Actually Changes
The ratchet is where the two versions diverge. Tooth count sets how many engagement points exist around the drive ring, and therefore how far the mechanism can rotate before the pawls or ratchet faces lock up. A 54T ratchet has more, finer teeth than a 36T, so the free rotation before engagement is shorter. In practice that means quicker pickup when the rider resumes pedaling — most noticeable in technical corners, repeated accelerations and situations where the rider is in and out of the pedals.
A 36T ratchet engages after a larger arc of rotation. That is not a defect; it is a different trade. Coarser teeth are larger and can be a sensible choice where the priority is a robust, simple engagement character and the rider is mostly pedaling steadily — long road efforts, rolling terrain, steady group riding. The 54T option suits builds where responsiveness off the pedal is part of the wheelset's story.
Both versions in the MT-037F/R use ARC's patented one-piece ratchet architecture, which the company describes as supporting reliable engagement, efficient power transfer and structural rigidity. It is worth being precise here: tooth count changes pickup frequency, not the fundamental engagement principle, and no tooth count should be read as a claim about durability, drag or power savings without test data. Where a program needs a documented engagement figure, that should be requested as a specification rather than inferred from the tooth count alone.
The practical selection logic is straightforward. If the wheelset is aimed at riders who value immediate drive engagement and the build can carry a finer ratchet, 54T is the natural fit. If the program prioritizes a coarser, simpler engagement character for steady road use, 36T is the appropriate choice. Either way, the decision sits inside one hub platform, so the rest of the specification does not need to be re-engineered around it.
Confirming Freehub, Bearing and Frame Compatibility Before You Order
The ratchet is only one line in the purchase specification. The MT-037F/R supports Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. That breadth matters to a wheelset brand because drivetrain choice fixes the freehub: a Shimano 11-speed road group, a SRAM XDR-equipped groupset and a Campagnolo build each require the matching body. Confirming the drivetrain first, then the freehub, prevents the most common ordering error — a hub set that is correct in every respect except the one part that interfaces with the cassette.
Bearings are the second item to lock down. ARC offers steel or ceramic bearing options for this hub set. The choice should follow the program's service and cost position rather than assumption: steel bearings are the conventional specification, while ceramic is an option to be selected deliberately and specified explicitly on the order.
The third item is the frame interface. The 12×100mm front and 12×142mm rear thru-axle spacing is the baseline for this hub set, and it must be verified against the fork and frame dropouts, including thru-axle diameter and thread pitch as specified by the frame maker. The Center Lock rotor interface should also be confirmed against the rotor specification. Total weight is approximately 376.3g for the set — a useful figure for the wheelset's weight budget, but a specification value to be confirmed for the exact configuration ordered rather than a fixed number across all freehub and bearing combinations.
A workable pre-order checklist looks like this:
- Ratchet: 36T or 54T, chosen against the wheelset's engagement positioning
- Freehub: Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W or Campagnolo 11/12-speed, fixed by the drivetrain
- Bearings: steel or ceramic, stated explicitly
- Axle spacing: 12×100mm front, 12×142mm rear, verified against frame and fork
- Rotor interface: Center Lock, checked against the rotor specification
- Weight: approximately 376.3g, confirmed for the final configuration
Working with ARC on an OEM or ODM Hub Set Program
For a wheelset brand or complete-bike buyer, the value of a hub set like this is that the specification variables are visible and adjustable within one platform. ARC, based in Taicang, Jiangsu, has manufactured high-performance bicycle hubs since 2013 and provides OEM and ODM development and customization for bicycle brands, wheel manufacturers and distributors across road, mountain, gravel and e-bike programs. That background is relevant to a road disc hub program in a specific way: the ratchet, freehub, bearing and axle configuration are exactly the kind of variables an OEM conversation is meant to settle before tooling and production planning begin.
A productive sample or development request should arrive with the ratchet choice, freehub standard, bearing option, axle spacing and expected frame interface already stated, together with the wheelset's intended positioning. Bringing those decisions to ARC early keeps the discussion on specification and build consistency rather than on rework. Buyers who are still weighing 36T against 54T can use the engagement character described above as the starting point and confirm the final configuration against their own ride testing and frame program.
The MT-037F/R is worth placing on a supplier evaluation list for road disc wheelset programs that want a 24H straight-pull, Center Lock hub set with a choice of ratchet engagement and broad freehub coverage. The next step is to fix the specification — ratchet, freehub, bearings, axle — and take that confirmed list into an OEM or ODM conversation with ARC.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China