For a disc road wheel program, the freehub body is often the last specification locked in and the first one to cause a build delay. A hub set can have the right drilling, the right brake mount, and the right axle spacing, yet still be unusable if the freehub does not match the groupset going onto the frame. The ARC MT-075FB/RB 24H Straight-Pull Center Lock Road Hub Set addresses this by offering the same hub platform across several freehub standards, so the decision moves from "which hub fits my drivetrain" to "which freehub do I specify."
What a 24H Center Lock Road Hub Set Is For
The 24H front and rear configuration describes a hub set drilled for 24 spokes at each end. For road and disc-road wheel builders, that count supports balanced wheel building without pushing toward the low spoke counts that demand very high tensions or unusual rim pairings. It is a practical middle ground for alloy and carbon disc road rims alike, and it keeps spoke sourcing straightforward across a wheel range.
Center Lock is the rotor interface: the disc rotor mounts with a lockring rather than six individual bolts. That affects assembly time, rotor change speed, and which lockring tools the workshop needs. Straight-pull spokes change the spoke geometry at the flange, which influences how the wheel is laced and how the spoke line runs under load.
These three choices are independent of each other, and each needs to be checked against the rest of the build. The ARC MT-075FB/RB combines them with a 12×100mm front and 12×142mm rear thru-axle configuration. That spacing suits modern disc road frames and forks, but it is not universal, so it should be verified against the actual frame and fork drawings rather than assumed.
Matching the Freehub to Your Drivetrain
Freehub selection is where most specification errors happen, because groupset families use different cassette interfaces and buyers often work from the groupset name rather than the cassette standard.
The MT-075FB/RB is compatible with Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed freehub standards. The mapping in practice runs roughly like this:
- Shimano HG covers the long-standing Hyperglide cassette interface used across a wide range of road groupsets and third-party cassettes.
- Road Micro Spline (MSR) is the road-oriented Micro Spline interface, distinct from the mountain version. Buyers moving to road 12-speed Shimano cassettes should confirm which interface their cassette actually uses.
- SRAM XDR is the road version of SRAM's XD driver, used with SRAM road 12-speed cassettes. It is not interchangeable with XD.
- Campagnolo N3W is Campagnolo's current road freehub standard, designed to accept both recent and older Campagnolo cassettes with the appropriate spacers.
- Campagnolo 11/12-speed is listed separately, which matters if a program is supporting existing Campagnolo wheels and cassettes alongside newer N3W builds.
Two confirmation steps prevent most mismatches. First, identify the cassette standard, not just the groupset brand and speed. Second, check whether a spacer is required for the specific cassette being fitted. ARC lists these freehub standards as available options, and the exact configuration for an order should be confirmed at the quote stage.
One hub platform covering five freehub standards is genuinely useful for wheel brands and OEM buyers. It means a single hub set can serve several complete-bike programs or aftermarket wheelset SKUs without sourcing a different hub for each drivetrain family, which simplifies spares, documentation, and build sheets. For buyers assembling a supplier shortlist, the MT-075FB/RB is worth including in the evaluation precisely because the freehub choice sits inside the same product rather than requiring a separate hub model.
Axle, Rotor, and Bearing Details to Confirm
Beyond the freehub, three fit dimensions decide whether the hub set will work.
Thru-axle spacing. The set uses 12×100mm at the front and 12×142mm at the rear, the common modern disc road standard. Frame and fork specifications should be checked directly, including dropout type and any manufacturer-specific axle requirements. Quick-release frames are not served by this configuration.
Rotor mounting. Center Lock requires a compatible rotor and the correct lockring. Some thru-axle setups use a lockring that needs a cassette tool rather than a bottom bracket tool, so the workshop tooling should be confirmed before the first build. Rotor diameter clearance is a frame and fork question, not a hub question, but it belongs on the same checklist.
Bearings. The hub set is offered with S&S steel bearing options. Bearing specification, sealing arrangement, and service intervals should be confirmed for the intended use case, particularly for programs where wet-weather riding or high mileage is expected. ARC MT-075FB/RB 24H Straight-Pull Center Lock Road Hub Set is the reference point for the available configurations.
Materials, Weight, and Engagement in Practice
The hub shell is AL6061-T6 aluminum, while the axle, freehub body, and end caps are high-strength AL7075 aluminum. That split is a sensible one: the shell carries the spoke loads and benefits from a tough, weldable, well-understood alloy, while the load-bearing internal parts and freehub take advantage of 7075's higher strength for a given weight.
Total weight is approximately 345.2g for the set. Buyers should treat that as a reference figure and confirm the exact weight for the specific freehub and bearing configuration they order, since freehub bodies differ in construction.
Engagement is handled by a 6-pawl, single-tooth system. ARC describes it as providing responsive pickup and consistent power transfer. In practice, pawl count and tooth engagement affect how quickly the drive engages when the rider applies power and how the load is distributed across the mechanism. These are design characteristics rather than guarantees of a particular ride feel, and actual performance depends on the whole build: lacing pattern, spoke tension, rim stiffness, and rider input all contribute. Buyers evaluating engagement should ask for the relevant specification detail for their configuration rather than inferring outcomes from pawl count alone.
What to Verify Before Ordering from ARC
ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., has manufactured bicycle hubs since 2013 and provides OEM and ODM solutions for bicycle brands, wheel manufacturers, and distributors. For a hub set order, that means the specification conversation can go beyond picking a part number.
Before placing an order, buyers should confirm the freehub standard against the exact cassette model, the 12×100mm and 12×142mm thru-axle fit against frame and fork drawings, the Center Lock rotor and lockring tooling, the bearing option, and the weight for the chosen configuration. Sample requests, order quantities, lead times, and any customization requirements should be raised directly with ARC so they are confirmed in writing rather than assumed.
For wheel builders and OEM buyers specifying a disc road hub set, the MT-075FB/RB is a reasonable candidate to put on the shortlist: the freehub range covers the main road drivetrain families from one platform, the 24H Center Lock straight-pull configuration suits balanced disc road wheel building, and ARC's OEM/ODM background fits programs that need specification support rather than a catalog order. The right next step is to confirm the freehub and axle details against the actual build and request a sample for validation.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China