For OEM and ODM wheel program managers, the central question about any hub set is whether its configuration options can be matched to the range of wheel builds a program has to deliver—and whether the underlying materials and interfaces will hold up across those builds. The ARC MT-005F/R Road Disc Hub Set answers that question with a defined specification set: J-bend spoke flanges, a 6-bolt disc interface, AL6061-T6 and AL7075 construction, a 4-pawl engagement system, three hole counts, two freehub standards, and 12×100mm front / 12×142mm rear thru-axle spacing at roughly 414.3g for the set. For brands and wheelset companies assembling road disc wheels across multiple price points and frame standards, those choices are the ones that determine how much of a program a single hub platform can cover.
Configuration Flexibility for Road Disc Wheel Programs
Program managers rarely buy one wheel specification. A road disc line typically spans rim depths, spoke counts, and drivetrain standards, and each variation has to be sourced without multiplying the number of hub SKUs beyond what planning and inventory can absorb.
The MT-005F/R addresses this on two axes. Hole counts of 28H, 32H, and 36H let a program serve lighter, lower-spoke-count performance builds alongside higher-spoke-count endurance or heavier-rider wheels from the same hub family. Spoke count selection is a wheel-building decision that affects rim drilling, spoke availability, and lacing pattern, so having all three options within one model simplifies the bill of materials across a range.
On the drivetrain side, the hub set is compatible with both Shimano HG and SRAM XDR freehub standards. That matters for OEM programs selling into markets where either groupset spec is common, and for ODM work where the brand customer specifies the drivetrain. Rather than stocking two unrelated hub models, a wheel builder can hold one hub platform and vary the freehub body to match the order.
Because ARC's OEM and ODM business is structured around road bikes alongside MTB, gravel, and e-bike categories, the MT-005F/R sits within a product context where configuration variation is a normal part of the program conversation rather than an exception. The practical value for a buyer is fewer distinct hub part numbers to qualify, document, and stock while still covering the common road disc build variations.
Material and Engagement System
Material choices in a hub set affect two things program engineers care about: how the part behaves under sustained load, and how consistently it can be produced across a batch.
The MT-005F/R uses an AL6061-T6 aluminum hub shell paired with a high-strength AL7075 aluminum axle, freehub body, and end caps. This is a deliberate split of responsibilities. AL6061-T6 is a widely used shell material with good machinability and corrosion behavior, which suits the larger formed geometry of a hub shell. AL7075 is a higher-strength alloy commonly selected for loaded, thinner-section parts such as axles and freehub bodies. Pairing the two allows the shell and the load-bearing drivetrain parts to be optimized separately rather than forcing one alloy to serve both roles.
The engagement system is a 4-pawl, single-tooth design. Pawl count and tooth geometry are among the factors that shape how a hub engages under pedaling load and how drive torque is distributed across the mechanism. A four-pawl arrangement spreads engagement across multiple points, and the single-tooth configuration defines the ratchet interface. For OEM evaluation, the relevant point is that engagement behavior is a defined part of the specification rather than an unspecified variable—engineers can assess it against the drivetrain response their wheel program requires.
Bearings are specified as S&S steel options. Bearing selection is one of the elements that influences rolling behavior and service life, though actual outcomes depend on bearing grade, preload, sealing, riding conditions, and maintenance. Program managers should treat the bearing specification as a qualification item to confirm against their own durability and service requirements rather than as a standalone performance claim.
ARC's manufacturing base in Taicang, Jiangsu, with CNC machining and quality control systems, is the relevant capability context here: the material specification is only useful to a program if it can be reproduced consistently across production batches, which is a manufacturing discipline question rather than a materials question alone.
Axle and Brake Interface Compatibility
Interface standards decide whether a hub can be dropped into existing frame and brake architectures without frame-side changes. For road disc programs, the two interfaces that matter most are thru-axle spacing and rotor mounting.
The MT-005F/R uses 12×100mm front and 12×142mm rear thru-axle spacing. These are the established road disc thru-axle dimensions, so the hub set aligns with frames built to the current road disc standard rather than requiring adapters or non-standard dropouts.
Rotor mounting is 6-bolt. The 6-bolt interface is a widely used standard with broad rotor availability across suppliers and price tiers, which gives a wheel program flexibility in rotor sourcing and in serving customers who specify 6-bolt rotors. Programs standardized on center-lock would need a different mounting interface, so this is a specification to match deliberately at the program-planning stage rather than a universal fit.
Spoke interface is J-bend. J-bend spokes remain the most common format in wheel building, with extensive availability in lengths, gauges, and materials, and they suit conventional lacing practices. A program already tooled around J-bend spokes can adopt the MT-005F/R without changing its spoke inventory or building process. Programs moving to straight-pull spokes would find this hub set outside that direction.
Taken together, the interfaces describe a hub set aimed at conventional road disc wheel construction: standard thru-axle spacing, common rotor mounting, and familiar spoke format. That is a coherent profile for OEM and ODM programs building wheels that need to fit a broad base of road disc frames rather than a narrow proprietary system.
Weight and Build Considerations
The hub set's total weight is approximately 414.3g. For road disc wheel programs, hub weight is one input among several in the final wheel weight, alongside rim, spokes, nipples, and rotor. Program managers typically evaluate hub weight in the context of the target wheel weight band and the spoke count and rim the hub will be paired with, rather than in isolation.
The more useful planning point is how the weight is achieved. The AL6061-T6 shell with AL7075 axle, freehub, and end caps reflects a material strategy aimed at balancing durability and weight efficiency, which is the trade-off most road disc programs are working within. A hub set that is light but requires conservative spoke counts or has limited load margin may not serve a broad program; one that is heavier but overbuilt for the application adds weight across every wheel in the line. The MT-005F/R's combination of three hole counts and a defined material set gives program engineers room to match the hub to different points on that spectrum.
Weight figures should be treated as nominal for planning purposes, and actual production weights should be confirmed against samples during qualification, as with any hub specification.
Where the MT-005F/R Fits in an OEM/ODM Program
For a wheel program manager deciding whether to include this hub set, the specification set points to a specific fit. The MT-005F/R suits road disc programs built around conventional interfaces—12×100mm and 12×142mm thru-axles, 6-bolt rotors, J-bend spokes—that need multiple hole counts and both Shimano HG and SRAM XDR freehub options without expanding the hub SKU count. The material split between AL6061-T6 and AL7075, together with the defined 4-pawl engagement system, gives engineers concrete construction details to evaluate during sample qualification.
ARC's role as a hub manufacturer serving OEM and ODM customers across road, gravel, MTB, and e-bike categories means the program conversation can extend to configuration questions beyond the standard specification. Brands and wheelset companies assessing the MT-005F/R for a road disc line can request samples to verify weight, finish, and engagement feel against their build requirements, and raise freehub or hole-count combinations as part of the program discussion.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China