The ARC MT-009FE/RE Boost MTB hub set is built around a specific set of choices that matter to anyone speccing a modern mountain bike wheelset: an 80-tooth ratchet drive, 6-bolt rotor mounting, J-bend spokes, and a hole count that can be ordered as 28H, 32H, or 36H. Each of these decisions carries a practical consequence for engagement feel, brake compatibility, wheel build logistics, and structural strength. For product managers and wheelset engineers evaluating the MT-009FE/RE for a trail, all-mountain, or enduro line, understanding how these specifications interact is more useful than a simple feature list.
ARC MT-009FE/RE Boost Hub Set at a Glance
The MT-009FE/RE is a Boost-spaced hub pair — 15×110 mm front and 12×148 mm rear thru-axle — designed around a forged AL6061-T6 aluminum hub shell, with high-strength AL7075 used for the axles, freehub body, and end caps. The set weighs approximately 469.2 g. The drive mechanism is an 80-tooth ratchet, and the hub set accommodates Shimano HG, Micro Spline, and SRAM XD freehub standards. Bearing options extend to S&S steel, ENDURO, and CeramicSpeed, which lets a brand position the same hub platform at different price and performance tiers.
This combination targets demanding MTB applications rather than casual cross-country use. The specification sheet reads as a coherent package for riders who prioritize quick engagement and durable load handling, and for brands that need one hub platform to serve several build levels.
80T Ratchet: Engagement and Durability for MTB Demands
Ratchet tooth count is the most consequential drive-side specification in this hub set. An 80-tooth ratchet divides each full rotation into 80 engagement points, which translates into a very short engagement angle — the crank-to-wheel free play before drive engages. On technical climbs, slow-speed technical terrain, and repeated pedal-to-coast transitions, that shorter gap is felt as a more immediate response.
Just as important is how the ratchet carries load. The MT-009FE/RE uses a broad, symmetrical contact interface between the ratchet rings, which helps distribute drivetrain torque across the tooth faces rather than concentrating it on a narrow contact patch. Under the high torque of low-cadence climbing or a loaded enduro bike, even load distribution is what supports consistent ratchet behavior over time. The mechanism suits trail, all-mountain, and enduro riding, where riders alternate between hard torque inputs and rapid freewheel positioning.
Two practical notes for buyers: an 80T ratchet is a fine-pitch system, so ratchet servicing discipline and correct lubricant choice belong in the after-sales documentation you plan for the wheelset. And because engagement feel depends on the complete system — ratchet, freehub, and bearing condition — no single tooth count should be read as a guarantee of drivetrain longevity.
Mounting Standards: 6-Bolt Disc and J-Bend Spokes
The 6-bolt rotor interface is the widest-established disc mounting standard in mountain biking. For brands and distributors, that means rotor sourcing is not constrained by the hub, and replacement or upgrade rotors are available across virtually every component tier. From a wheel-build standpoint, 6-bolt mounting also keeps the hub flange geometry conventional, which matters when the same wheel design has to accommodate several rotor brands and sizes.
J-bend spokes are the second compatibility decision. J-bend remains the most widely stocked spoke format in the world, so wheel builders gain flexibility in spoke length sourcing, field replacement, and repair turnaround. Straight-pull systems can offer certain build advantages, but they also narrow the spare-spoke supply chain — a real consideration for distributors supporting end customers across a riding season. On a Boost hub with a forged aluminum shell, the J-bend configuration keeps the flange and spoke interface familiar to most wheel builders, reducing the risk of lacing errors during volume production.
Hole Count Options: 28H, 32H, and 36H for Application Matching
Offering three drilling options from a single hub model is a meaningful planning advantage. Rather than maintaining separate hub SKUs for different wheel programs, a brand can match hole count to the intended duty cycle:
- 28H suits lighter, more weight-conscious builds and riders whose terrain does not demand maximum wheel stiffness.
- 32H is the mainstream choice for trail and all-mountain wheelsets, balancing strength, spoke count, and weight.
- 36H is oriented toward heavier riders, aggressive enduro use, or applications where wheel durability and load capacity take priority over weight.
The trade-off is straightforward: more spokes generally improve load sharing and resilience at the cost of some weight and build complexity. Because the MT-009FE/RE supports all three, a wheelset line can span from a lighter trail build to a heavier-duty enduro build using the same hub platform and the same J-bend spoke tooling.
Boost Axle Spacing and Freehub Compatibility
Boost spacing — 15×110 mm front and 12×148 mm rear — is the current default for modern mountain bike frames and forks, and it gives wheel builders more room for wider flange spacing and improved spoke bracing angles. Confirming that a frame and fork are Boost-compatible is a basic but essential step before committing a hub to a new model year.
On the drivetrain side, the freehub options cover the three dominant ecosystems: Shimano HG, Micro Spline, and SRAM XD. This lets one hub platform serve builds across multiple groupset families, which simplifies inventory and reduces the number of part numbers a distributor must carry. The bearing menu — S&S steel, ENDURO, or CeramicSpeed — adds a second layer of tiering, so the same hub shell can anchor an entry-level OEM wheelset and a premium aftermarket build. Buyers should confirm final freehub and bearing selection per SKU, since these are configuration choices rather than a single fixed specification.
OEM/ODM Opportunities with ARC
For brands and wheelset manufacturers weighing the MT-009FE/RE against other hub options, the relevant question is usually whether the supplier can support a program rather than a one-off order. ARC, the hub brand of Taicang Xiangyue Sports Equipment Co., Ltd., has manufactured bicycle hubs since 2013 from its base in Taicang, Jiangsu, China, and provides OEM and ODM solutions for bicycle brands, wheel manufacturers, and distributors across MTB, road, gravel, and e-bike categories.
The MT-009FE/RE reflects that manufacturing context: CNC-machined construction, a forged AL6061-T6 shell paired with AL7075 axles and freehub components, and a configuration menu covering hole count, freehub standard, and bearing grade. Brands developing a new MTB wheelset line can use those variables to position the hub set across price tiers, while distributors supporting multiple frame and drivetrain standards gain a single platform with broad compatibility. Specific customization requests — drilling, freehub selection, bearing specification, and branding — are best discussed directly with ARC's engineering and sales team, and any MOQ, lead time, or validation documentation should be confirmed with them rather than assumed from the specification sheet.
The MT-009FE/RE is a strong candidate for trail through enduro programs where quick ratchet engagement, standard 6-bolt and J-bend compatibility, and flexible hole counts are the deciding criteria. Brands whose requirements center on those points will find it worth including in a supplier evaluation, with ARC as the manufacturing partner behind the platform.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China