MTB Hub

ARC MT-051F/R 28H Boost 6-Bolt MTB Hub Set: What Wheel Builders Get

14 min read
On this page 6 sections

The ARC MT-051F/R 28H Boost 6-Bolt MTB Hub Set is aimed squarely at wheel builders working on modern trail and all-mountain wheelsets. Rather than a broad platform with interchangeable options, it is a defined specification: a straight-pull hub set with aluminum shells and axle, a 6-pawl drive mechanism, Boost spacing, 28-hole drilling front and rear, and a 6-bolt brake mount. For a builder, that combination answers the first practical question—whether the hub set can be laced into the rims and frames already on the bench—before questions of engagement or bearing choice arise.

Where this hub set fits in a trail and all-mountain build

Trail and all-mountain wheelsets typically sit in a durability-versus-weight trade-off. Riders in this segment expect a hub that can take repeated impacts, maintain drive engagement under load, and stay light enough not to blunt climbing performance. ARC positions the MT-051F/R specifically for this segment, which tells a builder where to place it in a product line: it is not a downhill or enduro-focused heavyweight, nor a cross-country race hub stripped for grams.

The stated total weight of approximately 258.6g for the set is the most immediate signal. That figure is light for a Boost MTB hub set and makes the platform relevant to builders whose customers weigh rotational mass seriously. Because the figure is a stated total, a builder should treat it as a reference point for the set as configured, and confirm the weight of the exact specification—freehub type and bearing option—before publishing a wheelset weight.

Structure and materials a builder can plan around

The hub set uses a straight-pull spoke structure, and that choice shapes the build before any spoke is cut. Straight-pull hubs require spokes with the correct head geometry and a lacing plan that accounts for how the spoke seats in the flange, so builders should confirm the intended spoke type and flange dimensions with ARC rather than assuming a J-bend workflow carries over. Straight-pull designs are often chosen for cleaner load paths and consistent spoke tension, which matters on wide Boost flanges.

Materials are specified as AL6061-T6 aluminum for the hub shells and high-strength AL7075 aluminum for the axle, freehub body and end caps. For a builder, the practical meaning is that the structural and wear surfaces are aluminum rather than steel, with the freehub body in particular being a component that sees repeated cassette load. AL7075 is a higher-strength aluminum grade than the shell material, which is a sensible division: the shell prioritizes formability and weight, while the axle and freehub prioritize strength. Builders should still confirm the freehub body's spline design if customers run cassettes with aggressive individual sprockets, since aluminum freehub bodies can show spline wear under heavy use.

Engagement, spacing and freehub compatibility

The drive mechanism is described as a 6-pawl, single-tooth engagement system. More pawls engaging in sequence generally shorten the free-play before drive pickup, and a single-tooth ratchet layout is associated with positive, well-distributed engagement. For trail and all-mountain riders, that translates into responsive pedal pickup on technical climbs and repeated low-speed torque inputs. A builder should confirm the exact engagement angle and the service procedure for the pawls and springs, since these are the parts most likely to need attention over a wheelset's life.

Frame and drivetrain compatibility is where the specification is most concrete. The set uses 15×110mm front and 12×148mm rear Boost spacing, matching the current trail and all-mountain standard. Both hubs are drilled at 28 holes, which suits builders targeting a balance of spoke count and rim weight—28H is common on modern wide trail rims. The freehub is offered in Shimano HG, Micro Spline and SRAM XD standards, so the same hub shell can be specified for the three main MTB drivetrain ecosystems. Builders should confirm which freehub is fitted to the sample or production batch, because the freehub choice affects the cassette interface and, in some cases, the dish and spoke length calculation.

Brake interface, bearings and stated weight

The 6-bolt disc interface is the traditional standard and gives builders broad rotor compatibility without adapters, which is useful when a wheelset needs to move between frames or serve customers with existing rotor inventory. It also keeps the hub design simpler than a Center Lock arrangement.

Bearings are listed as S&S steel options, which indicates that bearing selection may be configurable rather than fixed. For a builder qualifying a hub for a specific riding segment, bearing choice is worth a direct conversation with ARC: steel bearings are a durable default for trail use, and the option structure suggests the platform can be tuned to different durability or cost targets. The approximately 258.6g figure should be read alongside these choices, since bearing and freehub specification can shift the final weight. Builders should ask for the weight of the exact configuration they intend to order rather than quoting the headline figure across all variants.

What to confirm with ARC before specifying

ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer that provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, with coverage across MTB, road, gravel and e-bike hubs. That background is directly relevant to builders who need a hub platform they can specify consistently across production runs, rather than a one-off purchase.

The company also states that it works with CNC machining, precision manufacturing, professional engineering expertise and strict quality control systems. For a wheel builder, these are the process areas to probe when qualifying the MT-051F/R: the tolerance on flange dimensions and spoke hole drilling, the consistency of freehub spline dimensions between batches, and the inspection criteria applied to bearing seats. Because the hub set is a defined platform, the useful next step is a specification conversation covering the exact freehub standard, bearing option, spoke type intended for the straight-pull flanges, and the confirmed weight of that configuration—followed by a sample build to validate spoke length, tension and dish before committing to a production order.

For builders assembling trail and all-mountain wheelsets around Boost frames, 28H rims and 6-bolt rotors, the ARC MT-051F/R is a coherent, lightweight starting point whose value becomes clear once the freehub, bearing and spoke details are locked down with the manufacturer.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China