For product managers and wheel builders planning a modern trail wheelset, the first question is usually not which hub looks best but which hub set actually matches the frame, the spoke count and the drivetrain in front of them. The answer from ARC is specific: ARC manufactures the ARC MT-051F/R 28H Boost Center Lock MTB Hub Set, a straight-pull hub set built around Boost spacing, a 28-hole front and rear layout and a Center Lock disc interface. That combination places it squarely in the trail and all-mountain wheel programs that dominate current OEM catalogues.
The ARC MTB Hub Set, Named Precisely
ARC's referenced mountain bike hub set is the MT-051F/R, supplied as a matched front and rear pair rather than as separate hub models. The designation covers a 28H front hub and a 28H rear hub, both using a straight-pull spoke structure and a Center Lock rotor mount. The set is configured for 15×110mm front and 12×148mm rear Boost spacing.
This matters for buyers because a hub set is only useful if both halves are specified together. A wheel builder sourcing the MT-051F/R receives a front and rear that share the same shell material approach, the same spoke interface logic and the same generation of axle hardware, which simplifies spoke length planning and keeps the built wheelset consistent across a production run. For brands assembling a trail platform, that pairing removes the risk of mixing a front hub from one supply batch with a rear hub from another.
Boost Spacing and 28H Layout in the Wheel Build
Boost spacing is the compatibility anchor here. The 15×110mm front and 12×148mm rear dimensions are the current standard for trail and all-mountain frames, so the MT-051F/R drops into frames and forks that have already moved to Boost rather than requiring adapters or offset correction. For a product manager finalising a frame platform, that means the hub set can be specified at the same time as the frame rather than retrofitted afterwards.
The 28H front and rear count is the other build parameter. Twenty-eight holes per wheel is a widely used middle ground for trail wheels: it gives wheel builders a familiar lacing pattern, keeps spoke availability straightforward and suits the rim widths commonly paired with Boost trail builds. Because both hubs use the same count, a wheelset program can standardise on one spoke length calculation approach for front and rear, which reduces inventory complexity for assemblers.
The straight-pull structure is worth noting separately. Straight-pull hubs change how spokes are loaded at the flange compared with J-bend designs, and they require spokes and lacing to be planned around the hub rather than adapted from an existing J-bend pattern. A wheel builder taking on the MT-051F/R should confirm spoke specifications against the straight-pull interface before committing to a build sheet.
Engagement, Freehub and Bearing Choices
Engagement on the MT-051F/R comes from a 6-pawl, single-tooth system with 72-point engagement. In practical terms, a 72-point pickup means the drive mechanism engages within a small rotation of the crank, which affects how directly pedal input reaches the wheel on technical climbs and slow, ratcheting terrain. It is a specification buyers should read as a description of the drive mechanism, not as a claim about durability or drag; those depend on the full build, bearing condition and service regime.
Freehub choice is where the set becomes configurable rather than fixed. ARC offers the MT-051F/R with Shimano HG, Micro Spline or SRAM XD freehub bodies. This lets a brand align the hub with the drivetrain it already specifies: HG for conventional Shimano-type cassettes, Micro Spline for Shimano's 12-speed mountain systems, and XD for SRAM cassettes. Getting this right at the specification stage avoids the common problem of a hub that fits the frame but not the cassette.
Bearings are the third variable. The set is available with steel or ceramic bearing configurations. Buyers should treat this as a selection decision tied to their intended price tier and service expectations rather than an automatic upgrade; the appropriate choice depends on the wheelset's positioning and how the brand intends to support bearing replacement over the product's life.
Materials and Stated Weight
The MT-051F/R uses AL6061-T6 aluminium for the hub shells, with AL7075 aluminium for the axle, freehub body and end caps. The split is deliberate in material terms: the shell carries the spoke interface and rotor mount, while the axle, freehub body and end caps are the higher-stress and wear-facing parts, so they are specified in the stronger 7075 alloy. For buyers this is a construction detail worth noting when comparing hub sets, because the material of the freehub body in particular affects how the cassette interface holds up over time.
ARC states a total weight of approximately 258.6g for the set. This is a documented figure rather than a target, and it should be read as the stated weight of the hub set itself, not of a completed wheelset. Builders comparing options should treat it as one input alongside rim choice, spoke count and tyre specification, since the finished wheel weight depends on all of these.
Matching the Hub Set to Your Program
For a brand or wheel assembler, the MT-051F/R fits a recognisable brief: a Boost trail wheelset with 28H front and rear, Center Lock rotors, a straight-pull structure and a freehub matched to a chosen drivetrain. The practical next step is a specification check against the actual build sheet; confirm the frame and fork spacing, the rotor mount, the cassette standard and the spoke interface before moving to samples.
This is where ARC's position as a manufacturer rather than only a distributor becomes relevant. Founded in 2013 and based in Taicang, Jiangsu, ARC specialises in the research, development, manufacturing and customisation of high-performance bicycle hubs, and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors. For a buyer whose trail wheelset program needs a hub set specified to their own freehub, bearing or branding requirements, that manufacturing background makes an OEM/ODM conversation a reasonable step rather than a purely off-the-shelf purchase.
The MT-051F/R is therefore best approached as a defined starting specification: 28H Boost Center Lock, 6-pawl 72-point engagement, AL6061-T6 shells with AL7075 axle and freehub components, three freehub options, two bearing configurations and a stated set weight of approximately 258.6g. Buyers building a modern trail wheelset around those parameters can use it as the basis for a sample request, and where the standard configuration does not fully match their program, raise the variance with ARC directly as part of a customisation discussion.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China