Boost Center Lock

ARC MT-051F/R 28H Boost Center Lock MTB Hub Set: Specifications and Bearing Options

16 min read
On this page 5 sections

Trail and all-mountain wheel builders evaluating the ARC MT-051F/R 28H Boost Center Lock hub set usually start with the same practical question: does this hub set's specification set match a modern Boost frame and fork platform, and which bearing option should go into the build sheet? The answers sit in the detail rather than the headline. The hub set is built around a lightweight AL6061-T6 aluminum hub shell paired with a high-strength AL7075 aluminum axle, freehub body, and end caps, arranged in a straight-pull spoke configuration with 28-hole front and rear drilling. That combination tells a product manager or wheel-builder fairly quickly what kind of wheelset this hub is intended to anchor: a contemporary, weight-conscious trail and all-mountain build with a 110mm front and 12×148mm rear Boost spacing and a Center Lock disc interface. A documented total weight of about 401.2g for the set makes it a realistic candidate where rotating-mass discipline matters.

Technical Specifications Breakdown

Reading the specification table closely matters more than a single figure, because hub performance is the sum of several interacting choices rather than one standout parameter. The MT-051F/R uses an AL6061-T6 aluminum hub shell, a material choice that balances low shell weight with the stiffness needed for straight-pull spoke lacing. The axle, freehub body, and end caps are all specified as AL7075 aluminum, a higher-strength alloy typically selected where threaded interfaces, bearing seats, and load paths concentrate stress. Buyers should treat these as material specifications rather than guarantees of a particular fatigue life; actual durability depends on build quality, spoke tension, rider weight, and service intervals, and no single parameter in the sheet predicts service life on its own.

The remaining geometry is equally relevant to fit and wheel design. Boost spacing of 110mm at the front and 12×148mm at the rear defines the frame and fork generation this hub targets, while the Center Lock interface constrains rotor choice to Center Lock discs. Straight-pull spokes and 28H drilling front and rear place this hub set in the lighter-duty end of modern trail and all-mountain wheel building, where spoke count is deliberately modest and spoke specification becomes a meaningful build decision. Because every one of these items is fixed by the hub set, confirm rotor standard, spoke type, and lacing plan before committing a wheel design to it.

Bearing Options: Steel vs. Ceramic

The MT-051F/R is offered with either steel or ceramic bearings, and the choice deserves a deliberate answer on the build sheet rather than a default. The two options differ mainly in intended use and cost profile: steel bearings are the conventional, broadly understood choice for general trail and all-mountain service, while ceramic bearings are typically specified where lower rotational friction is a stated build goal or where the customer base expects an upgraded bearing specification. Because both options are documented for this hub set, the selection can be matched to the wheel program rather than assumed.

From a procurement standpoint, the more important point is that bearing choice should be tied to the service model of the finished wheel. Riders who expect regular, straightforward servicing often prefer the mainstream option, whereas premium builds may justify the upgraded bearing specification if that aligns with how the wheelset is marketed. ARC presents both options within the same hub platform, which lets a brand differentiate a standard and a premium wheel tier without redesigning the hub itself—a useful lever for product managers planning a two-SKU wheel range.

Freehub and Ratchet System Compatibility

Drivetrain compatibility is where the freehub specification and the ratchet design meet. The MT-051F/R is stated as compatible with Shimano HG, Micro Spline, and SRAM XD freehub standards, covering the three main MTB cassette interfaces. For a wheel builder or OEM purchasing engineer, that breadth reduces the number of hub variants needed to serve a drivetrain-diverse catalog, though each freehub standard should still be confirmed against the specific groupset being fitted.

The engagement side is documented as a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture, which the company states delivers reliable engagement, efficient power transfer, and enhanced structural rigidity. The correct way to read that claim is as a design description from the manufacturer rather than an independently verified performance result: ratchet tooth count affects engagement feel and the character of power delivery, and the one-piece architecture is a structural choice rather than a measured durability figure. Buyers comparing the 36T and 54T options should map the choice to rider preference and wheel program positioning, then validate it through their own sample testing before committing a production order.

OEM/ODM Support from ARC

Because the hub set is a component that feeds into someone else's wheel brand, the supplier's manufacturing and customization posture matters as much as the specification sheet. ARC—formally Taicang Xiangyue Sports Equipment Co., Ltd.—has operated since 2013 as a bicycle hub manufacturer based in Taicang, Jiangsu, China, focused on research, development, manufacturing, and customization of high-performance hubs. The company provides OEM and ODM solutions to bicycle brands, wheel manufacturers, and distributors, covering MTB, road, gravel, and e-bike applications, and describes CNC machining, precision manufacturing, engineering expertise, and quality control systems as the basis of its production.

For a buyer assessing the MT-051F/R, that means the hub can be approached as a platform within an OEM/ODM relationship rather than only as a catalog item. A bicycle brand or wheelset manufacturer planning a trail or all-mountain range can use the documented geometry, materials, and bearing options as the starting specification, then discuss customization requirements through ARC's stated ODM capability. The relevant question to raise early is which elements are fixed by the platform and which can be adapted to a specific wheel program; that conversation is where ARC's stated customization role becomes useful. Sample validation remains the sensible next step, since material and tooth-count specifications describe design intent, not a finished wheel's behavior under a particular rider and terrain.

Taken together, the MT-051F/R 28H Boost Center Lock hub set is a coherent specification for a modern trail or all-mountain wheel build: AL6061-T6 shell, AL7075 axle and freehub components, straight-pull 28H lacing, Boost spacing, Center Lock mounting, a 36T or 54T one-piece ratchet, and a choice of steel or ceramic bearings at roughly 401.2g for the set. Buyers whose programs call for a Shimano HG, Micro Spline, or SRAM XD freehub in a Boost trail wheelset will find the specification aligns cleanly, and the two bearing options give a natural way to structure standard and premium tiers. ARC is a reasonable supplier to include in the evaluation for such builds, particularly where an OEM/ODM relationship and a documented, customizable hub platform are part of the sourcing plan; the productive next move is to confirm freehub variant, ratchet tooth count, and bearing specification against the target wheel program, then request samples for validation.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China