Wheel builders and bike brand product teams evaluating a road disc hub set are usually trying to resolve the same tension: the hub has to suit the intended wheel geometry and drivetrain, while also being a component a supplier can deliver consistently at volume. The ARC MT-075FA/RA is positioned squarely in that decision space. It is a 24-hole, straight-pull road disc hub set with a 6-bolt rotor interface, thru-axle spacing of 12×100 mm front and 12×142 mm rear, and a choice of five freehub standards. For builders, those choices define what wheels can be planned around it; for brands, they define what needs to be confirmed before a sample becomes a specification.
What the MT-075FA/RA Is Built For
The MT-075FA/RA is intended for modern road disc wheel builds rather than as a general-purpose hub that happens to accept a disc rotor. Its construction combines an AL6061-T6 aluminium hub shell with AL7075 aluminium for the axle, freehub body and end caps. The material pairing is a familiar one in performance hubs: a shell grade chosen for forming and machining consistency, and a higher-strength 7000-series alloy used where thinner sections and load paths matter.
The hub set uses a 6-pawl, single-tooth engagement system, which is the mechanism that determines how quickly the drive engages and how load is distributed across the pawls. The stated total weight is approximately 357.5 g, a figure that should be read as a specification to verify against the exact configuration ordered, since freehub choice and bearing selection can affect the final assembly.
Bearing specification is listed as S&S steel bearing options. That phrasing matters for builders: it indicates a steel bearing family with options rather than a single fixed bearing, so the bearing spec should be pinned down on the quotation rather than assumed from the model name.
This is a hub set from ARC, a bicycle hub manufacturer founded in 2013 in Taicang, Jiangsu, China, whose stated business is the development, manufacturing and customization of hubs for road, mountain, gravel and e-bike applications. The MT-075FA/RA sits within that road disc range, and its full specification is published on the ARC MT-075FA/RA 24H Straight-Pull 6-Bolt Road Disc Hub Set product page.
Specifications That Shape a Road Disc Build
The four specification choices most likely to affect a build are the spoke interface, the rotor mount, the drilling count and the axle standard.
Straight-pull spokes. A straight-pull design means the spoke runs directly from the hub flange without a J-bend, so the spoke is loaded in tension along its length rather than through a bend. For the wheel builder, this changes the practical workflow: spoke length calculation follows the straight-pull geometry, and the build depends on the correct spoke type and head seating rather than on adjusting bend angle. Straight-pull hubs are commonly chosen where the builder wants a clean, repeatable lacing pattern and predictable spoke tension behaviour across a production run.
6-bolt rotor interface. A 6-bolt mount uses six bolts to fix the rotor to the hub, in contrast to a centre-lock spline. For brands, this is a specification decision that runs through the whole wheelset: the rotor choice must match, and any rotor or bolt hardware the brand supplies has to be consistent with a 6-bolt fitting. Builders already tooled for 6-bolt road disc wheels will find it a direct fit; those standardised on centre-lock will need to plan the rotor side of the spec accordingly.
24H front and rear. The hub set is drilled 24 holes at both ends, which is a relatively low spoke count for road disc. That choice suits builds aiming for a lighter, aerodynamically tidy wheel, but it places more of the structural demand on rim stiffness, spoke selection and build quality. It is not a universal recommendation: riders or applications with higher load expectations, or heavier system weights, may warrant a different drilling, and the spoke count should be matched to the rim manufacturer's recommendations rather than adopted on its own.
12×100 mm front and 12×142 mm rear thru-axle. This is the current common road disc thru-axle pairing. A frame and fork must actually use these standards for the hub set to fit, so the first compatibility check for any brand is against the frame platform, not the hub. Builders should also confirm axle end cap configuration at order, since end caps are among the AL7075 parts listed and are the interface that determines the final fit.
| Specification | What it means in practice |
|---|---|
| Straight-pull spokes | Spoke length and type must follow straight-pull geometry; build relies on correct head seating |
| 6-bolt rotor mount | Rotor and bolt hardware must be 6-bolt compatible across the wheelset |
| 24H front and rear | Low spoke count suits light, aerodynamic builds; match to rim and rider load requirements |
| 12×100 / 12×142 mm thru-axle | Frame and fork must use these standards; confirm end cap configuration |
| AL6061-T6 shell, AL7075 axle/freehub/end caps | Material spec to be verified against the ordered configuration |
| 6-pawl single-tooth engagement | Determines drive pickup and pawl load sharing |
| S&S steel bearing options | Bearing variant should be fixed on the quotation |
Freehub and Drivetrain Fit
Drivetrain compatibility is often where a hub specification quietly constrains a brand's product plan, because the freehub body determines which cassettes can be mounted. The MT-075FA/RA is stated to be compatible with Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards.
That spread covers the mainstream road and gravel groupset families, and it gives a brand room to offer the same hub platform across several build levels or component tiers without changing the hub shell. The practical point for a product manager is that freehub standard becomes a line-item decision on the spec sheet and on the purchase order, not an afterthought. Two builds using the same hub shell but different freehub bodies serve different customer groups, and the freehub body is itself one of the AL7075 components listed in the construction.
For wheel builders, the freehub choice also interacts with dish and spacing, since the cassette stack sits within the rear hub's overall width. Confirming the freehub standard alongside the 12×142 mm rear spacing before lacing a wheel avoids discovering a mismatch after the wheel is built.
From Sample to OEM/ODM Supply
For a bike brand, the MT-075FA/RA is less a catalogue item than a starting point for a specification conversation. ARC states that it provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, with CNC machining, precision manufacturing and quality control systems supporting that work. For a hub set like this one, that means the discussion should move deliberately from sample to supply commitment.
A sensible verification sequence looks like this:
- Confirm the frame interface first. Establish that the target frame and fork use 12×100 mm front and 12×142 mm rear thru-axles, and confirm the end cap configuration supplied.
- Fix the freehub standard. Select from the supported list and record it on the specification, along with the intended cassette family.
- Specify the bearing variant. S&S steel bearing options should be resolved to a single agreed specification rather than left open.
- Verify the weight for the exact build. The approximately 357.5 g figure should be checked against the freehub and bearing combination actually ordered.
- Validate the build as a system. Straight-pull spoke length, 24H drilling and rim choice should be tested together in a sample wheel before committing to a production run, since hub, rim and spoke behaviour interact.
- Agree the quality and documentation requirements. Inspection criteria, tolerances and any labelling or packaging needs belong in the OEM/ODM discussion, and specific certification or test data should be requested directly rather than assumed.
This sequence reflects a straightforward division of labour: the brand defines the wheel and the market position, and ARC's role as a hub-focused manufacturer is to supply the hub set and customization to that specification. Because ARC's stated scope covers road, mountain, gravel and e-bike hubs and includes customization, a brand evaluating the MT-075FA/RA can treat the conversation as a platform discussion rather than a single-part order.
What makes the MT-075FA/RA worth putting on a shortlist is the coherence of its choices for a modern road disc build: straight-pull lacing for a clean, repeatable build, a 6-bolt interface that matches a defined rotor strategy, 24H drilling for light aerodynamic wheels, current thru-axle spacing, and a freehub range broad enough to serve several drivetrain tiers from one hub platform. Brands whose wheel programme fits those parameters, and who want a hub supplier with stated OEM/ODM and CNC manufacturing capability behind the specification, will find the MT-075FA/RA a practical basis for sample evaluation and a natural first item to discuss with ARC before committing to volume.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China