For mountain bike wheelset programs built around carbon spokes, hub selection is not a secondary detail. Spoke count, flange geometry, axle standard and freehub interface all shape how the wheel can be built, how stiff it feels and how easily it can be serviced. The ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB hub set is a specific answer to that brief, combining a 24-hole front and rear configuration with Boost spacing, Center Lock brake mounting and a choice of ratchet engagement. For purchasing managers and product developers, the useful question is whether these specifications line up with a planned carbon-spoke build and whether the supplier can support the volumes and customization a B2B program requires.
Key Specifications at a Glance
The ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set is positioned as a lightweight hub set for high-performance mountain bike wheel builds. Its material specification separates the structural shell from the load-bearing and wear components: the hub shell is precision-machined from AL6061-T6 aluminum, while the axle, freehub body and end caps use high-strength AL7075 aluminum. That split is a practical one, since the shell benefits from a grade that machines cleanly into thin, consistent walls, while the axle and freehub body face different stresses and benefit from a higher-strength alloy.
The headline figures for a specification review are:
- Spoke count: 24H front and 24H rear
- Axle spacing: Boost, 15×110mm front and 12×148mm rear
- Brake interface: Center Lock
- Freehub compatibility: Shimano HG, Micro Spline and SRAM XD
- Ratchet system: 36T or 54T, using ARC's patented one-piece ratchet architecture
- Total weight: approximately 340.1g for the set
The weight figure is the one buyers will reach for first, and it should be read as a set-level specification rather than a per-hub number. Because weight depends on the selected ratchet option and freehub configuration, the appropriate comparison is between finished hub sets built to the same specification, not between a complete set and a single hub from another program. For a carbon-spoke wheel, where the spoke system already contributes a low rotating mass, a hub set in this range keeps the overall build consistent with the lightweight target.
Design Features for Carbon-Spoke Wheels
The 24-hole front and rear layout is the detail that matters most for carbon-spoke applications. Carbon spokes are typically built in lower, evenly spaced counts, and a 24H hub gives wheel builders a balanced drilling pattern on both flanges. That symmetry supports even tension distribution around the wheel, which is exactly what a carbon-spoke build depends on: the spoke system is stiff, so any imbalance in how the hub feeds tension into the rim tends to show up rather than disappear. A matched 24H front and rear pairing also simplifies inventory and build documentation for a wheelset program, since one spoke count covers both ends.
Boost spacing is the second structural decision. The 15×110mm front and 12×148mm rear standards widen the flange-to-flange distance compared with older spacing, which gives the builder more room to shape spoke angles. In practice, this allows a more symmetric bracing angle on the front wheel and helps manage the dish on the rear, both of which matter when the spoke itself has little give. It is worth stating plainly that hub spacing alone does not determine wheel stiffness or ride quality; rim depth, spoke tension, build method and tire choice all contribute. What the MT-116F/R provides is a Boost foundation onto which those other variables can be tuned.
Center Lock is the third feature with build consequences. A splined, single-lockring interface speeds up rotor installation and keeps the mounting consistent across a production run, which is useful for brands shipping complete bikes or wheelsets that need repeatable assembly. Buyers should confirm rotor and lockring selection against their own brake system, since Center Lock mounting does not by itself guarantee clearance with every caliper and frame combination.
Compatibility and Ratchet Options
Freehub compatibility is often the first filter in a hub procurement decision, and the MT-116F/R covers the three standards that dominate current mountain bike drivetrains: Shimano HG, Micro Spline and SRAM XD. Covering all three in one hub platform lets a brand serve multiple drivetrain configurations without switching hub models, which reduces part numbers across a range and simplifies aftermarket support. Each freehub standard should still be validated against the intended cassette and drivetrain specification at the project stage rather than assumed from the hub's compatibility list.
The ratchet choice is where the hub set becomes configurable rather than fixed. ARC offers 36T or 54T ratchets built on a patented one-piece ratchet architecture. The distinction is one of engagement behavior: a higher tooth count produces a smaller engagement angle, which some riders prefer for technical terrain where quick pedal pickup matters, while a lower tooth count is the more conventional choice. Neither option should be presented as universally better, and buyers should treat the choice as a spec decision tied to the intended riding category and the brand's positioning rather than as a performance guarantee. Because the ratchet is internal, it also affects the service story, and a wheelset program should plan for spare ratchet parts and documentation from the outset.
The combination of freehub standard and ratchet option means the same hub set can be specified several ways. That flexibility is useful for a brand running a single platform across different price points or riding segments, but it also means the purchase order needs to state the freehub and ratchet configuration explicitly.
OEM/ODM Support from ARC
Specification fit is only half of a B2B hub decision; the other half is whether the supplier can manufacture to that specification repeatably. ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a professional bicycle hub manufacturer based in Taicang, Jiangsu, China, founded in 2013 and focused on the research, development, manufacturing and customization of high-performance bicycle hubs. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, covering mountain bikes, road bikes, gravel bikes and e-bikes. For a carbon-spoke MTB wheelset program, that combination of a defined product platform and an established customization route is the relevant starting point.
The manufacturing basis ARC describes includes advanced CNC machining, precision manufacturing, professional engineering expertise and strict quality control systems. These are the capabilities that matter for a hub like the MT-116F/R, where the shell, axle and freehub body are machined to tolerances that directly affect bearing seating, spoke tension consistency and freehub alignment. Buyers evaluating the hub set should ask for the specification confirmation, inspection approach and sampling plan that apply to their order, and should validate the chosen freehub and ratchet configuration on sample builds before committing to production volumes.
ARC's OEM/ODM scope is also where project-specific questions belong. A brand that needs a particular freehub configuration, ratchet option, axle standard within the stated Boost specification, or branding treatment should raise it as part of the development conversation rather than assume it from the catalog listing. Minimum order quantities, lead times, certification requirements and production capacity are project-dependent and should be confirmed directly with ARC for the specific configuration under consideration, since they are not fixed attributes of the hub set itself.
For purchasing teams weighing the MT-116F/R against a carbon-spoke wheel program, the set is worth including in the evaluation shortlist when the requirements are a 24H front and rear layout, Boost 15×110mm and 12×148mm spacing, Center Lock mounting, a freehub choice across Shimano HG, Micro Spline or SRAM XD, and a ratchet engagement option in 36T or 54T at a set weight of approximately 340.1g. The next practical step is to match those specifications against the intended rim, spoke system and drivetrain, then open an OEM/ODM discussion with ARC on the exact configuration, validation samples and supply terms the program requires.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China