What the RT-035FCB/RCB Is Built For
Wheel builders sourcing a hub set for a lightweight road rim-brake program face a narrow field. Rim-brake road wheelsets still matter in weight-focused builds, training wheels, and markets where rim brakes remain common, yet the hub options that serve them are often either heavy workhorse models or thinly documented weight-optimized parts. The ARC RT-035FCB/RCB Carbon Straight-Pull Road Hub Set is aimed squarely at this gap: a hubset built for lightweight road rim-brake wheel builds, with a stated complete weight of approximately 358.3 g.
That positioning matters to OEM and ODM buyers because a hubset's weight, spoke interface, and drive configuration propagate through the entire wheel specification. The RT-035FCB/RCB is not a general-purpose hub dressed up for road use; its straight-pull spoke format, 20H front and 24H rear drilling, and carbon-and-aluminum shell construction are choices made for road wheels where low rotating mass and predictable spoke tension are the design targets. For purchasing managers and product engineers evaluating it, the useful question is not whether it is light, but whether its specific configuration matches the rim, spoke count, and drivetrain the wheel program already uses.
ARC, based in Taicang and founded in 2013, manufactures this hubset as part of its OEM and ODM hub business serving bicycle brands, wheel manufacturers, and distributors. The company's broader portfolio spans MTB, road, gravel, and e-bike hubs, but the RT-035FCB/RCB stands as a defined road rim-brake product with published configuration options rather than a catalog placeholder.
Materials and Hub Shell Construction
The hub shell combines an AL6061-T6 aluminum and carbon tube construction with high-strength AL7075 aluminum components. This is a mixed-material approach rather than a single-material shell, and the distinction is worth understanding when specifying the hubset in a wheel program.
AL6061-T6 is a widely used aluminum alloy for hub bodies where machinability and reasonable strength are required, while AL7075 is a higher-strength aluminum grade often selected for components where stiffness and load capacity matter relative to weight. Bringing a carbon tube into the shell structure is the design move that separates this hubset from conventional all-aluminum road hubs; the carbon section contributes to the lightweight character of the finished hubset while the aluminum elements carry the interfaces that must resist wear and clamping loads.
For wheel builders, the practical implication is that the shell should be evaluated as an engineered assembly, not by material label alone. The stated weight of approximately 358.3 g for the complete hubset reflects the combined result of these material choices and the hubset's other components; it should not be attributed to the carbon tube in isolation. Buyers comparing this hubset against aluminum alternatives should treat the material specification as a design description and confirm their own expectations for stiffness and durability through their normal validation process rather than inferring them from the material combination.
ARC's manufacturing background includes CNC machining and quality control systems, which is the relevant capability context for producing aluminum hub components to specification. That said, specific machining tolerances, surface treatments, and inspection criteria for the RT-035FCB/RCB are not published in the product information, and they belong on the list of items to confirm directly.
Spoke Drilling and Lacing Options for Wheel Builders
The hubset is drilled 20H at the front and 24H at the rear, in a straight-pull configuration. Both figures are conventional for lightweight road rim-brake wheels: a 20-spoke front keeps the leading edge light and aerodynamically simple, while 24 spokes at the rear provide the additional count needed to handle drive torque and the rider's weight distribution.
The more consequential specification for wheel designers is the lacing support. The RT-035FCB/RCB is stated to support both 1:1 and 2:1 spoke layouts. In a 1:1 layout, drive-side and non-drive-side spokes are used in equal proportion; in a 2:1 layout, twice as many spokes are assigned to the drive side as to the non-drive side, which changes how drive torque is distributed and how spoke tension is balanced across the rear wheel.
The product information describes this as supporting optimized spoke tension distribution and wheel stiffness. For a wheel builder, that translates into a real design decision: the same rear hubset can underpin a more traditional balanced lacing or a drive-biased lacing depending on the rim, the intended rider, and the stiffness target of the wheel. Straight-pull spokes also remove the J-bend at the hub flange, which is one reason this format appears in weight-conscious road builds, though the resulting spoke length and flange geometry must be verified against the builder's own spoke specification.
Because the hubset offers both layout options, OEM and ODM customers should settle early which lacing their wheel program will use, since that choice affects spoke count per side, spoke length, and the tension targets the build will be validated against. ARC's role here is as the hub manufacturer supplying the drilling and layout configuration; the rim, spoke, and build specification remain the wheel builder's own engineering responsibility.
Ratchet and Freehub Configuration
The drive side is where buyers make their most visible specification choices. The RT-035FCB/RCB uses a ratchet system available in 36T or 54T, built around a patented one-piece ratchet architecture. The product information frames this as delivering responsive engagement and reliable power transfer.
The 36T versus 54T decision is a familiar one for road wheel programs. A higher tooth count generally corresponds to finer engagement steps, which some riders and brands prefer for quick pedal pickup; a lower tooth count represents a different balance of engagement feel and internal geometry. Because ARC offers both, the hubset can be specified to match a brand's positioning without changing the rest of the hub architecture. What the product information does not state is the engagement angle in degrees for either option, so buyers who publish engagement figures in their own wheel specifications should obtain those values from ARC rather than calculating them from tooth count alone.
The freehub is offered in Shimano HG and SRAM XDR compatibility. These two standards cover the majority of road drivetrains that a rim-brake wheel program is likely to encounter, and offering both means a single hub platform can serve multiple complete-bike specifications without a separate hub design. As with any freehub specification, the exact cassette compatibility, spacer requirements, and end-cap configuration for each standard should be confirmed at the ordering stage rather than assumed from the standard's name.
The patented one-piece ratchet architecture is a genuine design differentiator worth noting in a brand's technical communication, but it should be described in the terms ARC provides. Claims about durability, service intervals, or noise characteristics are not part of the published product information and should not be added to a wheel program's marketing without verification.
Weight and OEM/ODM Specification Points
The complete RT-035FCB/RCB hubset is stated at approximately 358.3 g. For a rim-brake road wheelset, that figure is the starting point for the wheel's rotating mass calculation, and it should be treated as approximate, as the product information presents it. Buyers should confirm whether the figure covers the hubset as shipped, including freehub body, end caps, and any included hardware, before using it in published wheel weights.
Beyond weight, the specification conversation with ARC should settle several points that the product information leaves open. The first is the drilling and lacing combination the wheel program will use: front 20H and rear 24H are fixed, but the 1:1 versus 2:1 rear layout choice needs to be locked in. The second is the ratchet tooth count, 36T or 54T, and the freehub standard, Shimano HG or SRAM XDR, both of which are order-level selections. The third covers the details that belong to any OEM/ODM hub order but are not published here: minimum order quantities, lead times, available axle and end-cap configurations, color and finish options, and the inspection and acceptance criteria that will apply to production lots.
ARC is positioned as an OEM and ODM hub manufacturer serving global bicycle brands, wheel manufacturers, and distributors, with in-house CNC machining and quality control as part of its stated capability base. For a brand developing a lightweight rim-brake road wheelset, that combination is the relevant reason to open a specification discussion: the RT-035FCB/RCB provides a defined starting configuration, and ARC's customization and manufacturing role is what allows the hubset to be adapted to a specific wheel program rather than supplied only as a fixed catalog item.
The hubset is a sensible candidate for wheel builders whose program centers on lightweight road rim-brake wheels and who want a carbon-and-aluminum shell, straight-pull 20H/24H drilling with a choice of rear lacing, and selectable ratchet and freehub options from a single supplier. The next step is to bring the wheel program's rim, spoke, and drivetrain specification to ARC and confirm the open points above, so the RT-035FCB/RCB can be evaluated against the build it will actually serve. The product's detail page is the natural place to start that review.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China