Double-Sided Fixed-Gear Threading

CNC-Machined Track Bike Hubs with Double-Sided Fixed-Gear Threading and 16T Cog

18 min read
On this page 5 sections

Track and fixed-gear builders rarely get to choose a single hub that serves more than one drivetrain layout. Chainline changes, sprocket swaps and frame clearance issues usually force a compromise during the wheel build or a replacement hub later. The ARC GT-010F/R track hub addresses that problem directly: its double-sided fixed-gear threading lets the same hub carry a sprocket on either flange side, and the included 16T fixed-gear sprocket gives builders a defined starting point. For product managers and wheel builders specifying a fixed-gear wheelset, the value lies less in any single number and more in how threading, flange adjustment, shell machining and bearing count interact.

Why Double-Sided Threading Matters for Fixed-Gear Wheel Builds

On a conventional single-sided threaded hub, the sprocket position is fixed once the shell is machined. If the resulting chainline sits a few millimeters off, the builder has to correct it with spacers, a different crank position or an entirely different hub. Double-sided fixed-gear threading changes that by offering a threaded interface on both sides of the hub body. The builder can place the sprocket on the side that produces the cleaner chainline for a given frame and crank combination, rather than working around a predetermined side.

This is a practical advantage in fixed-gear and track builds for several reasons. First, chainline is a primary determinant of drivetrain noise, chain wear and lateral load on the sprocket and hub bearings; correcting it at the hub rather than through external spacers keeps the assembly simpler. Second, a frame with asymmetric rear spacing or a nonstandard dropout position may favor one side over the other, and a dual-threaded hub keeps both options open during mock-up. Third, builders who maintain multiple rear configurations can change cog position without changing the hub.

ARC pairs the dual threading with movable flange nuts. These allow the flange position to be adjusted within the hub's configuration range, which matters during wheel building because spoke flange spacing and offset influence dish and lateral stiffness. For a builder lacing a fixed-gear rear wheel, being able to tune flange placement while choosing the sprocket side gives more control over the final wheel than a fixed-geometry hub would. The result is a hub that supports flexible sprocket positioning and wheel-building configurations, which is exactly where dual-sided threading earns its place in a specification.

CNC Machining and Material Choices in the GT-010F/R Hub

The GT-010F/R uses a fully CNC-machined AL6061-T6 aluminum hub shell, a hollow CR-MO chromoly steel axle and AL7075 aluminum side covers. Each material choice maps to a different load path, and understanding that mapping helps buyers judge whether the hub fits a given program.

AL6061-T6 is a widely used aluminum alloy with good machinability and a favorable strength-to-weight balance after T6 tempering. In a CNC-machined shell, the manufacturing process removes material precisely rather than forming it, which allows tighter control over flange thickness, bearing seat dimensions and thread geometry than a cast or forged-then-machined shell typically offers. For fixed-gear use, where chain tension and skid braking can apply load in both directions, consistent bearing seats and thread quality matter more than a headline weight figure.

The hollow CR-MO axle is a deliberate choice for a hub that sees fixed-gear torque. Chromoly steel offers high fatigue resistance and toughness relative to its weight, and a hollow section reduces mass while retaining the stiffness needed at the dropout interface. AL7075 side covers add a hard, corrosion-resistant surface at the ends and help protect the bearing and axle assembly. The combination is not a claim of indestructibility; it is a rational material set for a track-oriented hub where axle strength, thread durability and bearing alignment are the priorities.

Precision machining also affects how the hub assembles. Bearing bores that are cut accurately keep the bearings square to the axle, which reduces preload variation and uneven bearing wear. For a buyer evaluating samples, checking thread cleanliness, bearing seat finish and flange symmetry is a reasonable first-pass inspection, since these are the features CNC machining is meant to control. ARC's stated manufacturing approach centers on CNC machining and precision manufacturing, which is the relevant capability here rather than any specific tolerance claim not published for this model.

The Role of the 16T Cog and Bearing Configuration

The GT-010F/R ships with a 16T fixed-gear sprocket and a lockring. A 16T cog is a common fixed-gear size, and supplying it with the hub removes one variable from the build: the buyer knows the starting drivetrain ratio and the thread interface the hub is designed around. The lockring secures the sprocket against the hub shoulder and resists the reverse torque that fixed-gear riding and skid braking generate, so the pairing of sprocket and lockring is a functional unit rather than an accessory.

Bearing count is the other reliability factor. The front hub uses a two-bearing configuration, while the rear uses four bearings. The rear hub carries the drivetrain load and the chain tension, and a four-bearing layout distributes that load across a wider support base, which is relevant for track and fixed-gear use where the rear wheel is the driven and braking element. For specifiers, the bearing configuration is a checkable item: confirm the bearing type, sealing and replacement path with the supplier, because these determine service life and maintenance cost over a wheel's lifespan, not just at first assembly.

Sprocket positioning and bearing layout also interact. Placing the cog on the chosen threaded side should keep the chain run aligned with the bearing support, avoiding a cantilevered load path. When the flange nuts are adjusted, the builder should recheck spoke tension and dish, since flange movement changes the wheel's geometry. These are ordinary wheel-building steps, but they are the steps where a dual-threaded, adjustable-flange hub returns its flexibility.

Sourcing and Customization Options for OEM Programs

For a bicycle brand or wheel manufacturer deciding whether to specify the ARC GT-010F/R, the sourcing question is less about the catalog hub and more about whether the supplier can hold a specification across production runs. ARC provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, covering MTB, road, gravel and e-bike categories alongside track and fixed-gear applications. That breadth matters when a brand wants a track hub as part of a broader hub program, since it reduces the number of suppliers to qualify.

Customization should be scoped against the published product facts. The GT-010F/R's defining features, namely the CNC-machined AL6061-T6 shell, hollow CR-MO axle, AL7075 side covers, dual-sided fixed-gear threading, movable flange nuts, 16T cog with lockring and the two- and four-bearing front/rear layout, are the baseline a buyer can request and inspect. Whether axle spacing, flange drilling, anodizing or branding can be adapted is a commercial question to confirm directly with ARC, along with minimum order quantities and lead times, since those are not published for this model. A sensible evaluation sequence is to request a sample, verify thread and bearing-seat quality, build a test wheel to check chainline and dish, and only then move to a production order.

The case for including ARC in a supplier shortlist rests on specific, verifiable points: the company manufactures hubs rather than trading them, it states advanced CNC machining, precision manufacturing and quality control as core capabilities, and it offers OEM/ODM engagement for brands and distributors. What buyers should not assume is a certification, a delivery window or a performance figure that has not been confirmed for this hub. Those belong in the supplier questionnaire, not in the specification sheet.

For brands and wheel builders aligning a fixed-gear or track wheelset with a clean chainline and a defined drivetrain starting point, the ARC GT-010F/R is a reasonable hub to evaluate first. Its dual-sided fixed-gear threading and movable flange nuts give builders room to position the sprocket and tune the wheel geometry, the CNC-machined AL6061-T6 shell and hollow CR-MO axle support the structural side of the specification, and the included 16T cog and lockring simplify the drivetrain setup. The next step is a sample build and a direct conversation with ARC about customization, quantities and schedule for the OEM program at hand.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China