What Double-Sided Fixed-Gear Threading Actually Changes
On a conventional fixed-gear hub, the fixed-gear threading sits on one side and a freewheel thread, or nothing at all, occupies the other. A double-sided fixed-gear hub changes that arrangement: both flanges of the rear hub carry the same fixed-gear thread, so the builder—not the hub—decides which side receives the sprocket. For a product engineer or procurement manager specifying a track hub, this turns the threading layout into an active setup variable rather than a fixed constraint.
The practical consequence is that the sprocket position is no longer dictated by which side the manufacturer chose to thread. Instead, the frame, the chainring line, and the wheel's intended orientation determine which side should carry the cog. That flexibility matters most when a frame has asymmetric rear-end features, when a wheelset has to serve more than one build, or when a brand wants a single hub SKU to cover mirror-image drive-side requirements. The ARC GT-010FA/RA track hub set applies this principle directly: its double-sided fixed-gear threading supports flexible sprocket positioning, so the same rear hub can be set up for either drive-side orientation without a second hub variant.
It is important to separate this from a conventional flip-flop hub. A flip-flop hub typically pairs a fixed thread on one side with a freewheel thread on the other, offering a choice of drive mode rather than a choice of drive-side placement. Double-sided fixed-gear threading offers the latter. Reading the hub correctly—both sides threaded for a fixed sprocket, not one fixed and one freewheel—is the first step in planning the build.
Choosing the Sprocket Side and Reading the Resulting Chainline
Once both sides carry fixed-gear threads, the sprocket-side decision should be driven by the chainring's lateral position, not by habit. The chainring on a track crankset sits at a defined distance from the frame centerline. The cog must land on the same plane for the chain to run straight. Because the two threaded sides of the hub sit at different distances from the frame centerline once the wheel is installed, swapping the sprocket from one side to the other shifts the cog laterally—often by only a few millimeters, but enough to matter for chainline and chainstay clearance.
A practical way to read the result is to assemble the wheel with the supplied 16T fixed-gear sprocket on the intended side, fit it to the frame, and measure chainline directly rather than calculating it from nominal dimensions. Chainline is the lateral distance from the frame centerline to the center of the chainring teeth; the same measurement should be taken to the center of the sprocket. With the wheel seated and the chain removed, a straightedge or a dedicated chainline tool held against the chainring face shows whether the sprocket plane aligns or sits inboard or outboard. A small, consistent offset is usually correctable at the crank or with chainring spacers; a large offset suggests the other threaded side is the better starting point.
Two build-specific checks belong in this step. First, confirm that the sprocket side you have chosen clears the chainstay at the sprocket's outer face—track rear ends are often tight, and the cog plus lockring stack occupies real width. Second, verify that the chosen side does not interfere with any frame feature such as a rear brake bridge or a dropout eyelet. The measured chainline, not the nominal threading position, is the number that should go into the build sheet.
Lockring, Sprocket, and Torque Details to Confirm
The threading only works as a system when the sprocket and lockring are matched to it. The ARC GT-010FA/RA hub set is supplied with a 16T fixed-gear sprocket and lockring, which means the sprocket and the locking hardware arrive as a set intended for the same thread. That reduces one common source of mismatch, but it does not remove the need to confirm details during specification.
Several points are worth confirming rather than assuming. The first is thread direction and standard: fixed-gear sprockets and lockrings are typically left-hand threaded on the drive side, and on a double-sided hub the reverse side must be checked on the actual sample rather than inferred. The second is the lockring's role in retention: the hub's integrated locking structure with stainless steel locking hardware is designed to hold the sprocket securely, and the lockring must be seated and torqued against the sprocket face, not merely hand-tightened. Third, the sprocket's own thickness and shoulder shape affect how much thread remains for the lockring, so a sprocket from a different supplier should be test-fitted before a production order is placed.
Torque values are best taken from ARC's specification for this hub rather than from generic tables, because the safe figure depends on the thread, the locking hardware, and the mating surfaces. If a project intends to substitute a different sprocket size or brand, that change should be flagged at the sampling stage so the thread engagement and lockring fit can be verified together.
What to Verify Before Specifying This Hub
For OEM and ODM orders, the double-sided threading is only useful if it fits the frame and the wheel build the hub is intended for. The verification list below converts the technical reading above into checks that can be run on a sample before committing to a specification.
- Frame spacing and dropout type. Confirm the rear spacing and dropout style the hub will be built into, and check that the hub's axle and end configuration match. The 20H front and 24H rear drilling should also be checked against the intended rim and spoke count.
- Chainstay clearance on both sides. Even if only one side will carry the sprocket, confirm that the alternate side clears the chainstay and any brake or dropout features, so the hub's flexibility is genuinely usable.
- Chainline with the chainring. Measure the assembled chainline with the 16T sprocket fitted, and confirm the chainring position the brand intends to use. This is the check that determines whether the chosen sprocket side is correct.
- Lockring and sprocket fit. Verify thread engagement, lockring seating, and the torque specification on the actual sample, and confirm that any alternate sprocket the project plans to use fits the same thread.
- Sample build before bulk. Build at least one complete wheel and fit it to a representative frame. Threading that measures correctly on the hub can still sit differently once laced, trued, and installed.
ARC's background supports this kind of specification work: founded in 2013 and based in Taicang, Jiangsu, the company focuses on hub R&D, manufacturing, and OEM/ODM customization for bicycle brands, wheel builders, and distributors. For a track or fixed-gear project, the ARC GT-010FA/RA track hub set is the product to evaluate against these checks, since its double-sided fixed-gear threading, supplied 16T sprocket and lockring, and integrated locking structure are built around exactly the setup question this article addresses. Buyers whose frames or wheelset plans call for flexible sprocket positioning will find it a practical candidate for the sample stage, with the chainline measurement and lockring fit confirmed on the built wheel before any bulk specification is finalized.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China