Fixed-gear and track wheel builders face a deceptively simple question when specifying a rear hub: where will the sprocket sit, and what hardware has to arrive with the hub so the wheel can actually be finished? A double-sided threaded track hub with a 16T cog addresses the first part by giving the builder two usable thread positions on the same shell. On the second part, what is included versus what must be sourced separately is where most ordering errors happen. The ARC GT-008F/R Track Hub is a direct example of this configuration, and its specification is worth walking through as a build decision rather than a catalogue line.
Why the Threading Layout Decides the Build
Threading on a fixed-gear hub is not cosmetic. It defines how far inboard or outboard the sprocket can sit relative to the hub flanges, and therefore how the chainline is set against the chainring at the cranks. A hub with a single threaded side leaves the builder with one position; chainline adjustment then has to come from bottom bracket spacing, chainring offset or axle repositioning — all of which shift the frame-side constraints too.
The GT-008F/R carries fixed-gear threading on both sides of the shell. In practice this means a sprocket can be mounted on either side, so the builder can choose the position that best aligns the chain with the frame's dropout spacing and the crank's chainring plane. On a custom build, that flexibility is often the difference between a clean, straight chain run and one that needs compensating hardware elsewhere. It also gives the wheel a second usable thread position if a build is reconfigured later, which matters for frame makers building small series where a single hub platform may serve more than one frame design.
The threading layout should be settled before spoke count, rim choice or tyre clearance, because it constrains the drivetrain side of the wheel. Once the sprocket position is fixed, the remaining specification work follows from it.
What the GT-008F/R Includes and What the Builder Adds
The 16T cog named in the product configuration is supplied with fixed-gear sprockets and lockrings, which changes the purchasing arithmetic. A builder specifying this hub is not separately hunting a sprocket and a lockring that are known to fit the thread and the shell; those items are part of the hub supply. That reduces the number of suppliers touched per wheel and, more importantly, reduces the risk of a thread or diameter mismatch discovered at assembly.
What the hub does not provide is the rest of the wheel. Rim, spokes, nipples and the lacing pattern remain the builder's decision, and the hub's flange geometry and spoke-hole count have to be matched to the rim's drilling and the intended build. Frame-side items are also outside the hub: dropout spacing, axle fixation method and chain tensioning arrangement belong to the frame, and the hub has to be specified to suit them rather than the other way around.
The practical sequencing is to confirm the cog and lockring supply when the hub is ordered, then confirm spoke count and axle configuration against the rim and frame, and only then commit the build sheet. Treating the 16T cog as an accessory rather than a supplied component is a common way to end up with an incomplete kit at the assembly bench.
Construction Details That Matter for Track Use
Track and fixed-gear use puts specific demands on a hub. The drivetrain is direct — there is no freewheel to absorb shock — so the shell, axle and bearing arrangement carry loads that a geared hub would partly isolate. The GT-008F/R uses a CNC-machined AL6061-T6 aluminium hub shell, a hollow CR-MO chromoly steel axle and AL7075 aluminium side covers. Those material choices map onto the load path: a steel axle for the bending and torsional duty at the dropouts, an aluminium shell for weight and machining precision, and aluminium side covers that close the shell and locate the bearing seats.
The bearing configuration is described by ARC as robust, supporting smooth rotation and reliable performance. For a builder, the relevant question is not a claimed figure but the fit between the bearing arrangement and the intended duty cycle — track sessions are short and high-cadence, while fixed-gear street and training use is longer and more variable. The stated construction is appropriate to that range, but a builder should confirm the bearing specification and service approach directly rather than inferring a service interval from the material list alone.
Material and process claims should be read as stated specification, not as a performance guarantee. AL6061-T6 and AL7075 describe the alloy and temper; they do not by themselves predict bearing life or shell fatigue, both of which depend on machining tolerance, bearing selection, spoke tension and how the wheel is used.
Configuration Points to Confirm with ARC Before Ordering
The build sheet should be resolved into a short list of confirmation points before a quotation is requested. These are the items where a mismatch is expensive to correct after production.
- Spoke-hole count. The GT-008F/R is available with multiple spoke-hole options. Confirm the count against the rim drilling and the intended lacing pattern.
- Axle and spacing configuration. The hollow CR-MO axle is the stated platform; confirm the axle length, end-fitting type and O.L.D. that matches the frame's dropouts and chain-tensioning setup.
- Cog and lockring supply. Confirm that the 16T cog and lockring are included in the ordered configuration, and the thread specification they are matched to.
- Threading side and sprocket position. State which side the sprocket will be mounted on and the chainline target, so the thread layout is verified against the frame.
- Finish and branding. For frame makers and wheel brands, confirm the finish and any marking requirements as part of the order rather than after tooling.
ARC's manufacturing scope covers hub research, development, manufacturing and OEM/ODM customisation for bicycle brands, wheel manufacturers and distributors, which is the relevant capability when a custom wheel programme needs a hub platform specified rather than a stock item picked from a shelf. The GT-008F/R Track Hub is the matching platform for track and fixed-gear builds, and its dual-sided fixed-gear threading is the feature that lets a builder set sprocket position without redesigning the rest of the drivetrain.
For builders and frame makers assembling dedicated track bikes or custom fixed-gear wheels, the GT-008F/R is worth putting on the specification list: the double-sided threading gives a real chainline option, and the supplied 16T cog and lockring close one of the more common gaps in a wheel kit. The next step is a build sheet with spoke count, axle spacing and cog configuration stated, sent to ARC for a sample or production quotation against those exact requirements.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China