Double-Sided Threading

Fixed-Gear Track Hubs with Double-Sided Threading and a 16T Cog: What to Specify

16 min read
On this page 6 sections

Fixed-gear drivetrains leave little room for error: the chain has no derailleur to absorb misalignment, and every torque load passes directly through the hub threads, cog and lockring. For brand product managers, wheel builders and component buyers, the practical question is not simply whether a hub accepts a cog, but how its threading, locking structure and shell dimensions support the ratio changes and chainline the build requires. The ARC GT-010FA/RA Track Hub Set is worth examining in that light, because its double-sided fixed-gear threading and supplied 16T cog are specification choices that shape both drivetrain setup and wheel-building planning.

Why Fixed-Gear Builders Care About Threading and Cog Specs

On a fixed-gear or track bike, the rear hub performs two jobs at once: it carries the wheel and it anchors the entire drivetrain. The cog is threaded directly onto the hub, secured by a lockring, and driven in both directions by leg force. That makes the thread quality, thread orientation and locking interface central selection criteria rather than minor details.

Two consequences follow for buyers. First, the number and placement of threaded sides determine whether a rider or product line can change gear ratios without rebuilding the wheel. Second, the locking structure and hardware must retain the cog under the high-torque, back-pedalling loads typical of fixed-gear riding. When these details are specified correctly at the sourcing stage, wheel builders avoid rework and brands avoid compatibility complaints downstream.

What Double-Sided Threading Does for Sprocket Positioning

Double-sided fixed-gear threading means the rear hub carries fixed-gear threading on both sides, allowing a sprocket to be mounted on either face. In practice this supports flexible sprocket positioning: a builder can plan a primary drive side and an alternative ratio on the opposite side, or accommodate frames and chainlines that suit one orientation better than the other. For product lines that serve both dedicated track use and custom street builds, that flexibility lets a single hub platform cover more configurations.

Threading alone does not set chainline. Chainline is determined by the hub's flange spacing, the frame's rear spacing and the chainring position, so the two threaded sides should be treated as a positioning option to be measured against the intended frame, not as a guarantee that any ratio will align. Buyers should confirm the rear spacing and flange dimensions of the GT-010FA/RA against their frame drawing before committing to a two-position plan, and should verify that both threaded sides are cut to the same standard so a cog seats consistently on either side.

The 16T Cog, Lockring and Locking Structure

The GT-010FA/RA is supplied with a 16T fixed-gear sprocket and lockring, which matters for two reasons. A 16T cog is a common baseline for track and fixed-gear gearing, so a supplied cog shortens the path from hub to rideable wheel and gives builders a known starting point for ratio planning. The lockring is equally important: on a fixed drivetrain, the lockring counteracts the loosening force that back-pedalling applies to the cog, so its fit and the hub's locking interface should be checked together.

ARC specifies an integrated locking structure with stainless steel locking hardware on this hub set, intended to ensure secure component retention under high-torque riding. For buyers, that translates into specific verification points: confirm that the supplied cog and lockring match the threading on both sides of the hub, check that the lockring engages the intended locking feature rather than relying on thread friction alone, and confirm cog tooth counts and lockring specification if a different ratio is required for the product line. Chainring size, crank length and frame clearance all influence the final ratio, so the 16T cog should be treated as a starting specification rather than a fixed drivetrain decision.

GT-010FA/RA Specifications That Affect the Build

The hub set's construction is aimed at the loads a fixed drivetrain imposes. The shell is fully CNC-machined AL6061-T6 aluminium, while the axle and components use high-strength AL7075 aluminium. Material choice affects stiffness, weight and how the hub behaves under repeated high-torque efforts, and CNC machining allows the thread and locking features to be cut to controlled tolerances rather than formed loosely.

Hole counts are 20H front and 24H rear, a configuration that gives wheel builders practical lacing options while keeping the build light. The hub set offers S&S steel bearing options and weighs approximately 512g in total. These figures should be read as specification points to confirm against the build target: a 20H/24H setup suits particular rim and spoke plans, and bearing selection should be matched to the intended use and maintenance regime. Where a brand needs a different hole count or bearing specification, that is a configuration question to raise directly with the manufacturer rather than an assumption to build into a purchase order.

ARC manufactures this specific track hub set and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, which means configuration details can be discussed at the manufacturing level instead of through an intermediary. For buyers evaluating the ARC GT-010FA/RA Track Bike Hubs, the relevant specification set is therefore the shell and axle materials, the 20H/24H drilling, the bearing option and the double-sided threading with its supplied 16T cog and lockring.

What to Confirm Before Ordering

The specifications above define what the GT-010FA/RA is; the next step is confirming how it will be configured for a specific build. Buyers should verify the following with the supplier before requesting samples or placing a production order:

  • Threading and cog fit: confirm that both threaded sides are cut to the same standard and that the supplied 16T cog and lockring seat correctly on each side.
  • Locking structure: confirm how the lockring engages the integrated locking feature and what stainless steel hardware is supplied.
  • Chainline inputs: check rear spacing and flange dimensions against the frame drawing, and plan chainring position accordingly.
  • Hole counts: confirm whether 20H front and 24H rear suit the intended rim and spoke specification, and whether other drillings are available.
  • Bearings and weight: confirm the S&S steel bearing option and the approximate 512g total weight against the build target.
  • Customization scope: clarify which elements — cog tooth count, hole count, bearing specification, finishing — fall within ARC's OEM and ODM customization range, and which are fixed to the standard configuration.

For track bike and fixed-gear brands, custom wheel builders and component distributors, the GT-010FA/RA is a sensible candidate to place on a supplier evaluation list when the build calls for a CNC-machined hub set with double-sided fixed-gear threading and a supplied 16T cog. Its value lies in the combination: flexible sprocket positioning, a defined locking structure and a specification set that can be checked point by point against the frame and wheel plan before any order is placed. Bringing those confirmation questions to ARC early is the practical way to establish whether the standard configuration fits the product line or whether an OEM/ODM variant is the better route.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China