MTB Hub

How to Choose Between 28H, 32H and 36H Configurations for an MTB Hub Set

18 min read
On this page 6 sections

The spoke-hole count is one of the first numbers a product manager writes into an MTB hub-set specification, and it is also one of the easiest to over-simplify. A 28H, 32H or 36H hub changes how a wheel is laced, how loads are distributed, how easy the wheel is to repair in the field and how the hub-set brief must be completed with axle, freehub and brake details. ARC manufactures the MT-007F/R MTB hub set in all three counts, which makes it a useful concrete example for working through the decision rather than treating the number in isolation.

Why the Spoke-Hole Count Is Only Half the Decision

The spoke-hole count sets the number of load paths between rim and hub, so it influences wheel stiffness, weight and redundancy. It does not, on its own, determine whether a wheel build is suitable for a given rider or program. A 32H hub laced with light spokes and low tension is not the same product as a 32H hub built with a stiff rim and higher spoke count per side of load; similarly, a 36H hub does not automatically make a wheel stronger if the rim, spoke gauge or build quality is mismatched.

For an MTB hub set, the count must be fixed together with four other decisions: axle standard, freehub standard, brake mount and spoke type. Change any one of these and the hub shell, end caps or freehub body may need a different configuration. This is why a hub-set brief should treat spoke count as one line in a complete specification, not as a standalone choice. ARC's MT-007F/R illustrates the point: the same model family covers 28H, 32H and 36H, with quick-release and thru-axle options, a J-bend spoke design and a 6-bolt disc interface. The count is selectable, but the surrounding interfaces define what the wheel program can actually use.

What 28H, 32H and 36H Each Imply for an MTB Wheel Build

At the level of general wheel-building principle, the three counts sit on a spectrum between weight and redundancy.

28H uses fewer spokes, which can reduce wheel weight and aerodynamic drag, and suits builds where the rim is stiff enough to carry load with fewer supports. It places more demand on rim strength and build precision, and it offers less redundancy if a spoke is damaged. For MTB use it tends to fit lighter riders, smoother trail categories or XC-oriented programs where weight is a priority and the wheel is checked regularly.

32H is the broad middle ground. It distributes load across a moderate number of spokes, supports common three-cross and two-cross lacing patterns, and leaves enough redundancy for trail and all-mountain use without the weight penalty of a 36H build. For many MTB programs it is the default starting point, subject to rider weight and terrain.

36H maximizes the number of load paths and redundancy. It suits heavier riders, aggressive terrain, loaded or e-MTB-adjacent applications where wheel durability outweighs weight, and service environments where a damaged spoke should not compromise the wheel. The trade-off is additional weight and a build that rewards careful tensioning.

These are build principles, not measured performance claims for any specific hub. The practical differences also depend on spoke gauge, lacing pattern, rim stiffness and build tension. A 36H hub built with thin spokes and a flexible rim will not behave like a 36H hub built for durability.

Matching the Count to Rider, Terrain and Service Reality

A workable selection method starts with the rider and the riding, then checks the service plan.

Begin with rider weight and riding discipline. Lighter riders on cross-country terrain can often specify 28H if the rim and build support it. Mid-weight riders on trail and all-mountain terrain generally fit 32H, which balances weight and redundancy. Heavier riders, aggressive descents, bike-park use and applications where a wheel failure is costly tend to justify 36H.

Then check the service reality. A 28H wheel with a damaged spoke loses a larger share of its support than a 36H wheel, so riders who cannot easily reach a workshop may prefer more spokes. A 36H hub also makes spoke sourcing simpler in many markets because 36H rims and spoke lengths are widely available. A 28H build can require more precise spoke-length planning.

Finally, check the lacing pattern that the rim and hub allow. Three-cross lacing is common on 32H and 36H builds; 28H builds often use two-cross or a mixed pattern. The hub flange geometry and spoke type must suit the chosen pattern, and J-bend spokes, as used on the MT-007F/R, require the flange and spoke head to be matched correctly.

For a buyer weighing these trade-offs across a model range, ARC's MT-007F/R is worth including in the evaluation because it offers all three counts in one hub-set family, which allows a brand to keep a common hub platform across different wheel tiers. That is a specification convenience, not a claim about ride performance, and it should be confirmed against the supplier's current documentation.

Locking the Rest of the Hub-Set Spec: Axle, Freehub and Brake Interface

Once the count is chosen, the remaining hub-set details must be confirmed in the same brief. The MT-007F/R shows what this checklist looks like in practice.

Specification pointOptions to confirmWhy it matters
Spoke-hole count28H, 32H, 36HSets lacing, spoke length and redundancy
Axle standardQuick-release or thru-axleMust match frame dropouts and rider preference
Freehub standardShimano HG, Micro Spline, SRAM XDMust match the drivetrain cassette
Brake interface6-bolt discMust match the brake rotor mounting
Spoke typeJ-bendDetermines spoke availability and build method

The MT-007F/R uses an AL6061-T6 aluminum hub shell with a high-strength AL7075 aluminum axle, freehub body and end caps, a 4-pawl, 3-tooth engagement system and a total weight of approximately 427g. Those details matter for the brief because they define the engagement feel, the material basis and the weight budget the wheel program is working with. They do not, by themselves, prove durability under a specific rider, so engagement, weight and dimensional details should be verified against supplier documentation rather than inferred from the spoke count.

The 6-bolt interface and J-bend spoke design are fixed attributes of this hub set, which means the wheel program must plan around them. A brand that wants Center Lock rotors or straight-pull spokes would need a different platform; a brand already standardized on 6-bolt rotors and J-bend spokes can treat these as settled and focus on the count, axle and freehub.

Briefing an OEM/ODM Hub Manufacturer Before Sampling

The decision becomes real when it is written into a supplier brief. A useful brief states the intended rider profile and terrain, the chosen spoke count with the reasoning, the axle standard, the freehub standard, the brake interface and the spoke type. It should also state the wheel program's target weight and the service plan, because these influence whether 28H, 32H or 36H is the right starting point.

ARC, based in Taicang, Jiangsu, has manufactured bicycle hubs since 2013 and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, covering MTB, road, gravel and e-bike applications. For a spoke-count decision, that matters because OEM/ODM work is where a hub platform is matched to a specific wheel program rather than chosen from a catalog. A buyer can ask the manufacturer to confirm the available counts, the axle and freehub combinations that can be paired with each count, and the dimensional details needed for spoke-length calculation before sampling.

A practical verification sequence is to request the current specification sheet for the chosen configuration, confirm the axle and freehub pairing in writing, check the brake interface against the rotor plan, and then build a sample wheel to the intended lacing pattern and tension. Only after that sample is measured should the count be locked for production.

The 28H, 32H and 36H choice is best made as part of a complete hub-set specification, not as a single number. Riders and programs that prioritize weight can evaluate 28H where the rim and build support it; the broad middle of trail and all-mountain use generally points to 32H; heavier riders, aggressive terrain and service-critical applications justify 36H. For brands that want one hub platform spanning those tiers, the ARC MT-007F/R hub set in its 28H, 32H and 36H configurations, with quick-release and thru-axle options, Shimano HG, Micro Spline and SRAM XD freehub compatibility, a J-bend spoke design and a 6-bolt interface, is a practical candidate to put on the evaluation list, provided the axle, freehub and brake details are confirmed against current supplier documentation before sampling.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China