Carbon-Spoke MTB Hub

How to Evaluate a 24H Carbon-Spoke MTB Hub Set Before Bulk Ordering

14 min read
On this page 7 sections

For a wheelset brand or OEM procurement team, a 24H carbon-spoke MTB hub set is not simply a lighter alternative to a conventional 28H or 32H build. It changes the spoke interface, the load path through the flange, the lacing options and the way the finished wheel is validated. Before committing to a bulk order, buyers need to confirm that the hub was actually engineered around carbon spokes rather than adapted to them. The ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set is a useful reference point for that evaluation, because its published specifications let a buyer check each decision area against a real product rather than a generic catalogue description.

Spoke Interface and Hole Count

Start with the spoke holes. A 24H front and rear configuration is intended to support balanced spoke layouts and efficient wheel construction, but the hole count alone says little. Carbon spokes are typically stiffer in tension and less tolerant of sharp edges and poor hole alignment than steel spokes, so the flange geometry, hole drilling quality and chamfering matter more than the number stamped on the spec sheet.

Ask the supplier three things: whether the flange was designed for the specific carbon spoke type you intend to use, what lacing patterns the 24H layout supports, and how spoke hole edges are finished to avoid stress concentration. Then confirm the answer physically with a sample build, checking spoke tension balance and whether the spoke elbows or heads seat cleanly. The ARC MT-116F/R is specifically engineered for carbon-spoke applications with a 24H front and rear configuration, which makes it a sensible candidate to test against your own rim and spoke combination rather than assuming compatibility from the hole count.

Materials and Construction

Material specifications are where bulk order quality is easiest to compare and hardest to verify. The MT-116F/R uses a precision-machined AL6061-T6 aluminum hub shell together with a high-strength AL7075 aluminum axle, freehub body and end caps. That split is worth understanding: the shell prioritizes machinability and adequate stiffness at low weight, while the axle and freehub take the higher-torque and higher-wear loads, where the stronger 7075 grade is a reasonable choice.

For procurement, the question is not whether these alloys are named but whether they are consistently sourced and machined to the stated tolerances batch after batch. Ask for material certificates, confirm the machining process is CNC rather than cast, and check axle and freehub tolerances on incoming samples. ARC's production relies on advanced CNC machining and strict quality control systems, which is the kind of process evidence buyers should request documentation for when qualifying a supplier.

Freehub and Ratchet System Compatibility

Freehub standard is a specification you cannot change later without changing the hub. The MT-116F/R is compatible with Shimano HG, Micro Spline and SRAM XD freehub standards, so the same hub platform can serve different drivetrain programmes. For a distributor carrying multiple groupset lines, that flexibility reduces SKU complexity; for an OEM building a single spec, it means confirming the exact freehub option at the order stage.

Engagement is the second decision. The hub set offers a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture, intended to deliver reliable engagement and efficient power transfer under demanding riding conditions. Higher tooth counts generally mean quicker engagement, which some riders value on technical terrain, but the right choice depends on your target rider and how the wheel will be marketed. Confirm which ratchet option is standard, which is optional, and whether both can be mixed within one bulk order.

Brake Mount and Axle Standards

Frame fit is binary: a hub either matches the frame or it does not. The MT-116F/R uses a Center Lock disc brake interface with 15×110mm front and 12×148mm rear Boost spacing. Boost spacing has become the mainstream standard for modern mountain bikes, and Center Lock is widely supported, but buyers should still validate against their actual frame and fork list rather than industry averages.

Two practical checks help here. First, confirm end cap configurations and whether they can be exchanged for different axle standards if your frame portfolio includes variations. Second, verify rotor compatibility and lockring clearance on the frames you supply. These are inexpensive checks at sample stage and expensive corrections after a bulk delivery.

Weight and Performance Considerations

The hub set weighs approximately 340.1g in total. In a lightweight MTB wheel build, hub weight is rotating mass near the center, so its effect on acceleration is smaller than rim or tire weight, but it still counts toward the complete wheelset figure your customers will compare. Treat the number as one input, not a performance verdict.

Weight also interacts with the other specifications. A lighter shell and 24H layout only make sense if the resulting wheel still meets your durability expectations for the intended riding category. The honest way to evaluate this is to build a sample wheelset, measure the complete weight, and run your own fatigue and tension-retention checks. Published hub weight does not predict wheel life; the build, the rim and the riding conditions do.

Supplier Quality and Customization Capabilities

The final evaluation area is the manufacturer behind the product. ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., has manufactured bicycle hubs since 2013 and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors. For a bulk buyer, that matters in two ways: whether the supplier can adapt a platform to your specification, and whether it can hold that specification across repeat orders.

On customization, ask what can actually be changed, such as freehub option, ratchet tooth count, axle configuration, finish and branding, and request the change control process in writing. On quality, request the inspection plan for incoming material, in-process machining and final assembly, plus sample retention arrangements. Because ARC works across MTB, road, gravel and e-bike hubs with CNC machining and documented quality control, it is reasonable to include the company in a supplier shortlist for a 24H carbon-spoke programme and to test the MT-116F/R as the reference platform. The evaluation framework above, applied to samples and documents rather than brochures, will tell you whether the hub set and the supplier are ready for your bulk order.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China