Double-Sided Threading

How to Evaluate Fixed-Gear Track Hubs with Double-Sided Threading for Custom Wheel Builds

17 min read
On this page 6 sections

Custom wheel builders sourcing fixed-gear track hubs face a recurring problem: double-sided threading is often sold as a headline feature, yet the specification rarely explains what that threading enables, how it should be measured, or whether the hub around it will fit a particular build program. The practical way to evaluate such a hub is to work backward from the wheel you intend to build, then verify threading, axle, shell, bearing arrangement, spoke-hole options and supplied parts in that order. ARC's GT-008F/R Track Hub, a fixed-gear hub with dual-sided threading, is a useful concrete reference for that process because its published material facts—CNC-machined AL6061-T6 shell, hollow CR-MO axle, AL7075 side covers, multiple spoke-hole options, and supplied sprockets and lockrings—map directly onto the checks buyers should be running.

Start With the Build, Not the Feature List

Before comparing any two double-sided threaded hubs, fix the parameters of the build. A custom fixed-gear wheelset has a chainline target, a frame dropout spacing, a rider weight and use case (track training, street riding, or display-quality builds), and a spoke count dictated by the rim and intended wheel strength. Each of these turns a generic hub specification into a pass-or-fail criterion.

Two consequences follow. First, threading is only valuable if the resulting chainline can be set within the frame's adjustment range; a hub with threading on both sides but the wrong flange-to-flange dimension may still push the chainline out of range. Second, the hub's material and bearing construction must match the duty cycle: a track hub used for standing starts and repeated high-torque efforts has different demands from a city fixed-gear build. Writing these requirements down before requesting samples prevents the common error of evaluating hubs on feature badges rather than build fit.

The GT-008F/R, for example, is explicitly positioned for track cycling and fixed-gear applications, with a 16T cog and double-sided thread, so it belongs on a shortlist where a dedicated fixed-gear drivetrain is the design intent—not where a multi-speed freehub is required.

What Double-Sided Threading Actually Changes

Double-sided threading means a sprocket can be mounted on either side of the hub. In practice this delivers three things a buyer should test rather than assume: the ability to choose which side carries the driven sprocket, additional freedom in positioning the sprocket to achieve a target chainline, and the option to run a second sprocket or a lockring arrangement on the opposite side depending on the intended setup.

The evaluation question is not "does it have two threads?" but "does the thread placement support my chainline and drivetrain layout?" On a sample, measure the distance from the dropout face to the sprocket seating face on each side, fit the supplied sprocket and lockring, and confirm that the chain runs straight to the chainring with the wheel centered in the frame. Where a builder intends to flip the wheel or run different gearing, check that both sides accept the sprocket cleanly and that the lockring engages fully.

ARC describes the dual-sided fixed-gear threading on the GT-008F/R as allowing flexible sprocket positioning, which is the correct functional claim to test: flexibility exists only if the measured chainline lands where the frame needs it.

Thread, Axle and Shell Checks Buyers Can Verify

Threading quality is a sample-verification item, not a catalogue reading. Buyers should confirm the thread pitch and direction with the supplier in writing, then check engagement by hand-threading the supplied sprocket and lockring onto both sides. A thread that starts cleanly, runs without binding and seats the lockring flush is a good sign; cross-threading, rocking or a lockring that bottoms out early are grounds to reject the sample.

The axle is the next checkpoint. The GT-008F/R uses a hollow CR-MO chromoly steel axle—a material choice relevant to strength-to-weight and torsional stiffness in a fixed-gear application. Buyers should ask about axle diameter, end-nut or bolt specification, and dropout interface, then confirm the axle seats correctly in the actual frame or fork ends used in the build. Hollow axles are common in this category; what matters is that the wall thickness and end hardware suit the rider load and that the axle does not develop play under torque.

Shell construction is the third verifiable layer. The GT-008F/R shell is CNC-machined AL6061-T6 with AL7075 side covers. Machining and material grade are facts a buyer can compare, but tolerances, bearing seat concentricity and surface finish should be confirmed on the sample and through the supplier's inspection documentation—these are the details that separate a hub that builds into a true wheel from one that fights the builder.

Bearings, Spoke Holes and Supplied Parts

Bearing claims deserve careful reading. ARC states that the GT-008F/R uses a robust bearing configuration that supports smooth rotation and reliable performance. That is a fair description of design intent, but it is not a published bearing count, size or seal specification. Buyers should therefore ask for bearing type, quantity, and sealing arrangement, and check rotation feel on the sample: smooth, free of notchiness, with no axial play. Where a program demands serviceability, confirm whether bearings are pressed or replaceable and what tools are needed.

Spoke-hole options matter to custom builders because the hub must match the rim's drilling and the intended lacing pattern. The GT-008F/R is offered with multiple spoke-hole options, so buyers should specify the count required by their rim and confirm flange dimensions, spoke hole diameter and PCD before ordering—these determine spoke length calculations and lacing feasibility.

Supplied parts reduce build friction. The GT-008F/R is supplied with fixed-gear sprockets and lockrings, which means the builder receives a matched sprocket-and-lockring pair rather than sourcing compatible hardware separately. Confirm cog size, lockring thread compatibility, and whether spares can be ordered for production runs.

Qualifying the Supplier Behind the Hub

The hub is only half the decision; the supplier behind it determines whether a build program can scale. Arc (Taicang Xiangyue Sports Equipment Co., Ltd.) manufactures hubs from Taicang, Jiangsu, China, and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors. For a fixed-gear or track wheelset program, the relevant questions are whether the supplier can hold the threading and axle specification across batches, whether spoke-hole and finish options can be customized, and what inspection records accompany each shipment.

ARC's stated capabilities—CNC machining, precision manufacturing and quality control systems—are the areas to probe in a supplier audit or sample order. Ask for the inspection points applied to thread engagement, axle fit and bearing seat concentricity, and request that the first production batch be checked against the approved sample. Because the GT-008F/R already offers dual-sided threading, material specifications and multiple spoke-hole options, it is a sensible starting point for buyers who need a defined fixed-gear hub platform and want to discuss customization within an established design rather than starting from a blank sheet.

For custom wheel builders and fixed-gear brands, the practical next step is to assemble the build requirements—chainline target, dropout spacing, spoke count, cog size and expected duty—then request a GT-008F/R sample and verify the threading, axle fit, bearing feel and supplied hardware against that list. A hub that passes those checks on the bench is a far more reliable foundation for a production order than one selected on the strength of a feature description alone.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China