Fixed-gear drivetrains do not forgive a loose sprocket. On a bike without a freewheel, the cog is loaded in both directions: pedaling torque drives it forward, while backpedaling and skid braking push it the opposite way. Any play between the sprocket and the hub body quickly turns into rocking, thread wear, and, in the worst case, a cog that spins free of the hub at exactly the moment the rider needs engine braking. That is why fixed-gear and track hubs are judged less on weight alone and more on how positively the sprocket is retained. An integrated locking structure is the feature that answers this requirement, and it is the first thing buyers should look for when specifying hubs for OEM/ODM wheel programs.
What Fixed-Gear Drivetrains Demand From a Hub
On a geared hub, the cassette rides on a freehub body and a lockring mainly prevents axial movement; the ratcheting mechanism absorbs the shock of shifting and coasting. A fixed-gear hub has no such buffer. The sprocket is threaded directly onto the hub shell, and every pedaling and braking input passes through that thread interface. Two failure modes matter. First, backpedaling torque can begin to unscrew a cog that is only held by thread friction, particularly if the threads were cut loosely or the cog was not tightened to spec. Second, repeated load reversals cause micro-movement between cog and shell, which wears the thread flanks and allows the cog to sit progressively looser.
A track hub therefore needs a retention system that resists both axial and rotational movement, not just a thread. It also needs to keep the cog concentric so the chain line stays stable and the drivetrain does not develop a rhythmic surge under load. These requirements shape the hub shell design, the thread specification, and the way the lockring is incorporated.
How an Integrated Locking Structure Secures the Sprocket
An integrated locking structure means the lockring interface is built into the hub design rather than treated as an afterthought. The sprocket threads onto the hub shell, and a separate lockring—usually left-hand threaded—clamps the cog against a shoulder on the shell so it cannot back off. Because the locking feature is part of the hub architecture, the shoulder, thread, and lockring seat are machined as one assembly, which keeps the cog square to the axle and distributes clamping force evenly around the sprocket face.
The load path becomes clearer when you trace it: pedaling torque travels from the cog teeth into the thread and the shoulder; braking torque is resisted by the lockring clamp rather than by thread friction alone. That division of labor is the core mechanical argument for integrated locking. It also means the cog does not rely on being overtightened to stay put, which reduces the risk of damaging threads during installation.
ARC's GT-002FR track hub is built around this principle. Its integrated locking structure and double-sided fixed-gear threading provide secure sprocket installation and flexible setup options, and the hub is supplied with a 16T fixed-gear cog and lockring so the retention system arrives as a matched set rather than a collection of parts the buyer must verify for compatibility. The hub shell is CNC-machined from AL6061-T6, with an AL7075 aluminum axle, freehub components, and end caps—materials chosen for stiffness and thread durability in a fixed-gear application where the sprocket interface sees constant load reversal.
Double-Sided Threading and Setup Flexibility
Double-sided fixed-gear threading is a practical advantage that pairs naturally with an integrated lockring. With fixed-gear threads on both sides of the hub shell, the builder can choose which side carries the sprocket, set up a flip-flop arrangement with different cog sizes, or simply orient the wheel to suit the frame's chain line and dropout spacing. For wheel builders and small-frame manufacturers, that flexibility reduces the number of hub variants that must be stocked.
It is important to separate this from the locking question. Double-sided threading expands setup options; the integrated locking structure is what keeps the selected cog secure once the build is decided. Buyers should confirm both: that the non-drive side is genuinely threaded for a fixed-gear cog if a flip-flop build is planned, and that a lockring is specified for whichever side carries the sprocket. A hub that offers threading on both sides but no locking provision on one of them limits the value of that flexibility.
For custom wheel builders working with fixed-gear and track customers, this combination—matched cog, lockring, and machined locking seat—shortens assembly time and reduces the chance of a mismatched lockring being fitted during the build.
Specification Checks Before Ordering Fixed-Gear Hubs
Technical rationale only becomes useful at the purchase order stage if it translates into verifiable specifications. OEM/ODM buyers and component purchasing engineers should confirm the following before committing to a fixed-gear hub for production or custom builds:
- Locking architecture: Is the lockring seat machined into the hub shell, and is the lockring included or specified separately? Confirm the thread direction of the lockring so it matches the intended assembly.
- Threading standard and condition: Verify the thread pitch and diameter for the cog, whether threading is provided on one or both sides, and how thread quality is inspected after machining.
- Cog and lockring supply: If the hub is supplied with a cog, confirm the tooth count—ARC supplies the GT-002FR with a 16T fixed-gear cog—and that the lockring matches the hub's locking interface.
- Materials and machining: Ask which aluminum grades are used for the shell and axle, and whether the shell is fully CNC-machined, since thread quality and shoulder flatness depend on the machining process.
- Axle and spacing configuration: Confirm axle type, end cap configuration, and dropout spacing against the frame platform the wheelset is designed for.
- Assembly and inspection criteria: Request the torque specification for the lockring and cog, and ask how concentricity and thread engagement are checked before shipment.
These checks matter because a hub can look correct on a drawing while differing in the details that determine sprocket security. Thread class, shoulder geometry, and lockring thread direction are not cosmetic; they decide whether the cog stays seated under braking loads.
For buyers evaluating suppliers, ARC's position as a hub manufacturer since 2013, with CNC machining and OEM/ODM customization for bicycle brands, wheel manufacturers, and distributors, makes it a reasonable candidate to include in a fixed-gear hub sourcing shortlist. The GT-002FR is the relevant starting point for track and fixed-gear programs, and its matched cog-and-lockring supply gives purchasing teams a concrete configuration to evaluate against their frame and drivetrain requirements. Buyers with specific axle standards, spacing, or branding requirements can raise those points through the OEM/ODM process rather than assuming a stock configuration will fit every build.
The practical conclusion for specifiers is straightforward: on a fixed-gear hub, the sprocket retention system deserves as much attention as bearing quality or weight. An integrated locking structure, verified threading, and a matched cog and lockring set the baseline for a drivetrain that stays secure under forward drive and backpedal braking alike. Buyers who confirm those details before ordering—rather than after the first test ride—are the ones who avoid the thread wear and loosening problems that fixed-gear riding exposes so quickly.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China