Road disc hub specification goes wrong in a predictable way: the hub looks right in a drawing, the finish and weight are acceptable, and then the first frame or drivetrain check reveals a mismatch. In practice, two parameters decide whether a road disc hub can enter a build program at all — thru-axle spacing and freehub standard. Everything else, from spoke count to bearing specification, only matters after those two gates are cleared. This checklist shows how to verify both before samples are requested or a production order is placed, and where a hub set such as the ARC MT-075FB/RB fits the resulting specification.
Why Axle Spacing and Freehub Standard Decide the Order
Thru-axle spacing and freehub standard sit at the boundary between the hub and the rest of the bike. Axle spacing must match the dropout dimensions of the fork and frame, because there is no practical way to adapt a hub that is too narrow or too wide once the frame geometry is fixed. Freehub standard must match the cassette family and drivetrain brand, because the freehub body is the mounting interface for the cassette and determines which gear ranges and spacing the wheel can carry.
Both are structural decisions rather than tuning choices. A wheel builder can change spokes, nipples, and rim choice late in the program; changing axle spacing or freehub type usually means changing the hub itself, and often re-planning the wheel build around a different flange geometry. For bicycle brand product managers and procurement engineers, this makes the two parameters the natural first filter in any hub shortlist.
There is a second reason to settle them early. Frame and drivetrain specifications are typically locked before hub sourcing begins, so the hub has to conform to decisions already made elsewhere in the project. Treating axle spacing and freehub standard as the opening check — rather than something confirmed at the sample stage — keeps the rest of the specification work grounded in real interfaces.
Matching Front and Rear Thru-Axle Spacing
Front and rear spacing should be verified independently, from the fork and the frame respectively. A specification that is correct at one end says nothing about the other, and mixed standards do occur in real projects, particularly where a frame platform is carried over with a new fork or the reverse.
The check itself is straightforward. Read the fork and frame dropout drawings or the manufacturer's published axle specification, then compare the nominal spacing and axle diameter with the hub's stated dimensions. Modern road disc frames and forks commonly use 12 mm thru-axles, with 12×100 mm at the front and 12×142 mm at the rear, but the specification should be confirmed from the frame and fork documentation rather than assumed from the category.
Two practical points matter at this stage. First, spacing and axle diameter are separate attributes; a hub must match both. Second, the end caps are part of the interface, so the hub's stated configuration should be read as a complete assembly rather than as a bare shell dimension. A hub set that publishes its front and rear spacing explicitly, such as the ARC MT-075FB/RB with 12×100 mm front and 12×142 mm rear thru-axle spacing, allows this check to be completed from the specification sheet before any physical sample is involved.
Choosing the Freehub Standard for Your Drivetrain
The freehub decision follows the drivetrain, not the other way around. The starting point is the cassette family specified for the build: which brand, which groupset level, and which gear count. That determines the freehub body interface the hub must offer.
The common standards in road and gravel programs are Shimano HG, Road Micro Spline (MSR), SRAM XDR, and the Campagnolo options. Each corresponds to a different cassette mounting system, and they are not interchangeable without changing the freehub body. In a specification document, the freehub standard should be written as a named requirement alongside the drivetrain, so that the hub supplier quotes against a defined interface rather than a generic description.
This is also where multi-standard hub platforms simplify procurement. A hub set offered with a choice of Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards lets one wheel platform serve several drivetrain configurations, which is useful for brands running more than one groupset option across a model range. The specification task then becomes recording which freehub option applies to which build, and confirming that choice with the supplier before the order is released.
Checking the Rest of the Hub Specification
Once the two compatibility gates are cleared, the remaining specification items can be settled in the knowledge that the hub will physically fit the bike. Brake interface is the next interface to confirm: a disc road build needs the rotor mounting system to match the rotors specified, and Center Lock is a common choice on road disc hubs.
Spoke count and lacing configuration belong to wheel build planning rather than to frame compatibility, but they should be agreed at the same time, since they affect the hub's flange dimensions and the build's spoke specification. The ARC MT-075FB/RB, for example, uses a 24H front and rear configuration with a straight-pull spoke design, which is a build decision a wheelset manufacturer will want to evaluate against its own rim and spoke plan.
Material and engagement details round out the picture. Shell material, axle and freehub material, and the engagement mechanism all influence how the hub behaves in service, and they should be read from the manufacturer's stated specification rather than inferred. The same hub set uses an AL6061-T6 aluminum shell with AL7075 aluminum axle, freehub body and end caps, a 6-pawl single-tooth engagement system, and S&S steel bearing options, with a stated total weight of approximately 345.2 g. These are specification facts to compare against project requirements, not performance claims to be taken on trust.
Specifying a Road Disc Hub with ARC
For buyers working through this checklist, the value of a defined hub platform is that the answers are already documented. ARC, based in Taicang, Jiangsu, manufactures road disc hub sets and provides OEM and ODM solutions for bicycle brands, wheel manufacturers, and distributors, which means hub specifications are agreed as part of a development conversation rather than pieced together from a catalogue.
The ARC MT-075FB/RB 24H Straight-Pull Center Lock Road Hub Set maps directly onto the two-step check described above. Its 12×100 mm front and 12×142 mm rear thru-axle spacing covers the common modern road disc frame and fork configuration, and its freehub options — Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed — allow the drivetrain interface to be fixed at the specification stage. The Center Lock brake interface and 24H straight-pull build complete the picture for road disc wheelset programs.
For road and gravel bike brands, wheelset builders, and component distributors, the practical next step is to write the frame and fork spacing and the drivetrain's freehub requirement into the specification document first, then confirm those two items against the hub's stated configuration before requesting samples. Brands that want a single hub platform covering several drivetrain options will find the MT-075FB/RB worth including in the supplier evaluation, with the final choice resting on the frame, fork, and groupset decisions already made for the build.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China