Bicycle brands building trail and all-mountain models face a familiar sourcing problem: the hub is rarely the headline component, yet it determines how a wheelset laces up, how the drivetrain interfaces, and how consistently a build can be repeated across production runs. A hub supplier therefore has to be judged less on catalogue breadth and more on whether it can hold a defined specification—materials, spacing, spoke drilling, drive architecture, freehub standard—and reproduce it at volume under a brand's own requirements. That is the frame in which ARC, a bicycle hub manufacturer based in Taicang, Jiangsu, is worth evaluating.
What a Hub Brand Actually Needs From a Manufacturing Partner
For a product manager sourcing hubs, the practical questions are narrow. Can the supplier document what each part is made from, not just the hub as a whole? Are the axle, freehub body and end caps specified separately from the shell, since they carry different loads and wear differently? Is the drive system a named, describable architecture rather than a vague claim about "fast engagement"? And can the same specification be held across a first sample batch and later production?
These questions matter because hub choice constrains the rest of the wheel program. Spoke drilling and spoke type determine what the wheel builder can source. Axle spacing fixes which frames and forks the wheelset will fit. The freehub standard decides which cassettes the brand's spec sheet can list. A supplier that answers these clearly is easier to design around than one that answers only in generalities.
ARC's position is relevant here: founded in 2013 and working with bicycle brands, wheel manufacturers and distributors on OEM and ODM programs, the company presents itself as a specification-level manufacturing partner rather than a catalogue house. The evidence a brand can actually examine is the MT-051F/R hub set, which is documented part by part.
The MT-051F/R Boost Hub Set, Specified Part by Part
The ARC MT-051F/R 28H Straight-Pull Boost Center Lock MTB Hub Set is the concrete product through which ARC's manufacturing scope can be read. It is designed for demanding trail and all-mountain riding, and its material list separates the structural roles:
- Hub shell: AL6061-T6 aluminum, chosen for a lightweight shell that still carries the spoke and bearing loads.
- Axle, freehub body and end caps: AL7075 aluminum, a higher-strength alloy used where torque and clamping loads concentrate.
- Spoke configuration: straight-pull, with 28H drilling front and rear.
- Drive system: a 36T or 54T ratchet with ARC's patented one-piece ratchet architecture.
- Freehub compatibility: Shimano HG, Micro Spline and SRAM XD.
- Brake interface: Center Lock.
- Spacing: 110mm front and 12×148mm rear Boost.
- Bearings: steel or ceramic options.
- Weight: approximately 401.2g for the set.
Each of these is a specification a brand can verify and design around, not a performance promise. The material split is the clearest signal of manufacturing intent: using AL7075 for the axle and freehub body while keeping the shell in AL6061-T6 reflects a deliberate allocation of strength and weight rather than a single blanket material claim. The ratchet description is similarly specific—a one-piece architecture with two tooth-count options—which gives a brand something to test for engagement feel and durability rather than a marketing phrase to accept.
Configurations a Brand Can Align With Its Own Wheel Program
The configurable elements of the MT-051F/R are where an OEM/ODM conversation becomes practical, because each one ties into a decision the brand has already made elsewhere in the bike.
The 110mm front and 12×148mm rear Boost spacing fixes compatibility with modern Boost frames and forks; a brand building Boost trail bikes can adopt the set without changing its frame platform, while a brand still on non-Boost frames would need to look elsewhere. 28H drilling front and rear with straight-pull spokes determines the rim and spoke inventory the wheel builder must carry—straight-pull hubs require the matching spoke type, so this is a supply-chain decision as much as a technical one. The Center Lock interface aligns with the rotor standard the brand already specifies on its brake build kits.
On the drivetrain side, Shimano HG, Micro Spline and SRAM XD freehub options let a single hub platform serve several cassette standards, which is useful for brands offering multiple build tiers from one frameset. The 36T or 54T ratchet choice lets a brand position engagement as a spec differentiator between models. Steel or ceramic bearings is a similar tiering lever. None of these options should be read as a performance guarantee—bearing type and ratchet tooth count interact with riding conditions, maintenance and load in ways that only testing settles—but they are the levers a brand can actually specify.
From Specification to OEM/ODM Program: What to Clarify First
A documented hub set is a starting point, not a production agreement. Before committing to an OEM/ODM hub program with ARC, a brand should settle several things in writing, and the MT-051F/R gives a useful checklist for doing so.
First, confirm which elements are fixed and which are open to customization. The published specification describes one hub set; an ODM program implies some degree of change, and the brand needs to know where that line sits before designing a wheel around it. Second, request samples against the exact configuration the brand intends to sell—specific ratchet tooth count, freehub standard, bearing type and spacing—since the combination is what gets tested, not the family. Third, define the verification method: how engagement, bearing smoothness and structural integrity will be checked, by whom, and against what acceptance criteria.
Fourth, align on the interface details that cross component boundaries—spoke type and length for straight-pull lacing, rotor fitment for Center Lock, cassette compatibility for each freehub option—because these are where hub and wheel-build specifications most often drift apart. Fifth, clarify documentation and traceability expectations for the program, and sixth, confirm commercial terms such as order quantities, lead times and change-control procedures; these are program-specific and should be agreed rather than assumed from a product page.
ARC's relevance to this process rests on what it has already published: a hub set with named alloys, a described ratchet architecture, stated freehub and brake standards, and defined spacing—plus an established role supplying OEM and ODM solutions to bicycle brands, wheel manufacturers and distributors. For a brand developing Boost trail or all-mountain wheels and wanting a partner that can be held to a written specification, ARC is a reasonable name to place on the shortlist and to approach with a concrete configuration and sample request in hand. The next step is not a broader catalogue review but a specification conversation built around the MT-051F/R and the brand's own wheel program.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China