ARC RT-002FB/002RB Road Hub

18H/21H vs 20H/24H: Choosing Spoke Counts for the ARC RT-002FB/002RB Road Hub Set

9 min read
On this page 5 sections

What the Two Spoke Configurations Actually Specify

In the ARC RT-002FB/002RB road hub set, the two options are drilling counts, not separate hub models. The 18H/21H version uses 18 spoke holes in the front hub and 21 in the rear; the 20H/24H version uses 20 front and 24 rear. Both sit on the same J-bend, rim-brake road platform, so the choice affects how a wheel is laced and built rather than which hub family a buyer commits to.

That distinction matters when a wheelset program is being specified. The front/rear split in each option is asymmetric, and that asymmetry is deliberate—it reflects the different loads and braking forces carried at each end of a rim-brake road wheel. Buyers comparing the two configurations are really deciding how many spokes their chosen rims and intended build will use.

Why Spoke Count Is a Build Decision, Not a Ranking

Neither configuration is inherently "better." Spoke count interacts with rim depth and stiffness, lacing pattern, spoke gauge, rider weight and intended use, and the number of crosses the builder plans. A low-count front wheel can suit a lightweight climber's build with a stiff, shallow-to-mid-depth rim, while a higher count at the rear is a common way to manage torque and durability. The point is that the hub must match the rim and the build plan, not that one number outperforms the other.

For rim-brake road wheels, the rear hub also carries freehub and drivetrain loads, which is one reason the rear count is higher in both options. Builders should treat spoke count as one variable in a system: confirm the rim's recommended drilling, the spoke type and length, and the intended lacing before locking in a hub configuration. Where a program spans multiple wheelset tiers—say, a lightweight climbing build and a more general-purpose training wheelset—using both configurations from one hub platform can simplify sourcing while letting each wheel be specified appropriately.

Specifications That Travel With Either Configuration

Choosing between 18H/21H and 20H/24H does not change the rest of the hub set's stated construction. Both configurations share a J-bend spoke design and an AL6061-T6 aluminum hub shell, paired with high-strength AL7075 aluminum for the axle, freehub body and end caps. The 4-pawl, single-tooth engagement system provides 48-point engagement, which is relevant to how quickly and reliably pedaling input is taken up. Freehub compatibility covers Shimano HG, Micro Spline and SRAM XD standards, so the freehub body is a separate configuration axis from spoke count. Spacing is 100mm front and 130mm rear—the rim-brake road baseline—and the set uses S&S steel bearings, includes QR001 quick releases, and weighs approximately 262.3g in total.

For buyers, this means spoke count can be decided alongside freehub standard and end-cap specification without reopening the rest of the hub's design. ARC manufactures the RT-002FB/002RB in both 18H/21H and 20H/24H configurations, so a wheelset program can draw on one hub platform across different builds. The product details are available on the ARC RT-002FB/002RB 18/21H & 20/24H J-Bend Rim Brake Road Hub Set page.

A Pre-Order Checklist for OEM/ODM Buyers

Before placing an order, confirm the spoke count configuration explicitly—18H/21H or 20H/24H—and state it in the purchase specification, since both are offered on the same model. Then verify the freehub standard (Shimano HG, Micro Spline or SRAM XD) against the groupset the wheelset will carry, and check that the 100mm/130mm spacing matches the frame and fork the build targets. Confirm whether QR001 quick releases and the intended end caps are included in the order, and agree on how spoke counts, freehub bodies and finishing will be documented for production.

Because ARC provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, these points can be raised as part of a customization discussion rather than a fixed catalog selection. Buyers planning rim-brake road wheelsets who want flexibility across lightweight and general-purpose builds will find the dual spoke-count option worth including in their supplier evaluation, provided the rim, lacing and freehub choices are confirmed first.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China