Straight-Pull Center Lock

24H Straight-Pull Center Lock Road Disc Hub Set: Freehub Compatibility for OEM Builds

16 min read
On this page 6 sections

For a road disc wheel program, the freehub is often the part that decides how many SKUs a hub platform can actually serve. A hub set that looks right on weight and spoke count can still fail commercially if it only supports one drivetrain ecosystem, because every additional standard then means a separate hub or a separate build. The ARC MT-030F/R 24H Straight-Pull Center Lock Road Disc Hub Set addresses this directly: it is offered with five freehub standards in a single hub platform, so a wheelset brand or OEM can plan one 24-hole, straight-pull, Center Lock build across several drivetrain families. The decision that matters is not simply whether the hub fits a frame, but which freehub options must be specified, and what to confirm with ARC before the design is frozen.

Why Freehub Compatibility Drives the Hub Set Decision

Road drivetrains no longer converge on a single cassette interface. Shimano road groups sit on HG or Micro Spline depending on level, SRAM road and gravel systems use XDR, and Campagnolo uses N3W or its older 11/12-speed pattern. For a wheel builder, each standard affects the freehub body, the cassette offset, and sometimes the axle end configuration. If a hub platform covers only one or two of these, a European distributor or complete-bike OEM ends up carrying parallel hub variants just to keep the same rim and spoke build.

Compatibility therefore belongs at the start of the specification, not at the end. A product manager needs to know whether one hub shell and one lacing pattern can be paired with different freehub bodies, because that determines inventory depth, assembly workflow, and how many wheel SKUs can be catalogued from a single platform. The MT-030F/R is relevant here precisely because its freehub coverage is stated as a platform feature rather than an afterthought: one hub set, five freehub standards. For buyers assembling a multi-brand wheel line, that is a genuine planning advantage, but it also means the freehub selection per SKU has to be recorded explicitly rather than assumed.

What the MT-030F/R Hub Set Specifies

The ARC MT-030F/R 24H Straight-Pull Center Lock Road Disc Hub Set is a lightweight road disc hub set built around a straight-pull spoke design and a Center Lock brake interface. The stated material split is deliberate: an AL6061-T6 aluminium hub shell paired with high-strength AL7075 aluminium for the axle, freehub body, and end caps. That combination puts the weight-sensitive shell in a familiar, machinable alloy while placing the higher-load parts in a stronger grade.

Engagement is handled by a 4-pawl, single-tooth system, which ARC describes as providing responsive pickup and consistent power transfer for road acceleration and climbing. The 24-hole front and rear configuration is stated to support balanced spoke tension and wheel stiffness. Approximate weight is 330.3 g for the set. These are the figures and features buyers should treat as the baseline specification; anything beyond them, such as specific bearing grades, spoke interface dimensions, or tested durability figures, should be confirmed rather than inferred from the summary.

Matching the Five Freehub Standards to a Road Disc Wheel Program

The five supported standards are Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed. In planning terms, they fall into three practical groups.

The first is Shimano HG, which remains the widest-installed road interface and is the natural default for entry and mid-range complete bikes. The second is Road Micro Spline and SRAM XDR, which serve the current 12-speed road and all-road generations from Shimano and SRAM respectively; these are the standards a European wheelset brand is most likely to be asked for in new model-year builds. The third is Campagnolo N3W and Campagnolo 11/12-speed, which let the same hub platform reach Campagnolo-equipped builds without a separate hub design.

For SKU planning, the implication is straightforward: a single rim, spoke length, and lacing pattern can be held while the freehub body varies by drivetrain. That reduces the number of distinct hub shells a buyer must stock and simplifies assembly documentation. It does not, however, make the standards interchangeable at the point of sale. Each wheel SKU should be labelled with its exact freehub standard, and the freehub body should be specified on the purchase order. Buyers should also confirm with ARC how freehub bodies are supplied, whether they can be ordered separately for aftermarket service, and whether the cassette offset and axle end caps differ between standards on this model.

Build Considerations for 24H Straight-Pull Center Lock Wheels

The 24-hole count and straight-pull spoke pattern are a matched pair. Straight-pull spokes eliminate the J-bend, which removes one common failure and variability point at the hub flange, and the 24H front and rear configuration is intended to support balanced spoke tension and stiffness in a road disc context. For wheel builders, this means the hub is oriented toward lightweight road and all-road wheelsets rather than high-spoke-count endurance or loaded builds, and the rim and spoke selection should be made with that in mind.

Center Lock is the other fixed variable. It constrains rotor mounting to the Center Lock standard, which is widely supported across road disc groups and simplifies rotor changes, but it should be locked in at the design stage so that rotor specification and hub interface are consistent. Builders should verify the spoke interface dimensions and recommended lacing pattern with ARC before cutting spokes, since straight-pull flange geometry is model-specific and cannot be assumed from a J-bend equivalent. The approximate 330.3 g set weight is useful as a planning figure for lightweight builds, but final wheel weight will depend on rim, spokes, nipples, and rotors, so it should not be treated as a complete wheelset weight.

Working with ARC as an OEM/ODM Hub Partner

Taicang Xiangyue Sports Equipment Co., Ltd., operating as ARC, has manufactured bicycle hubs since 2013 from Taicang, Jiangsu, China, and supplies OEM and ODM solutions to bicycle brands, wheel manufacturers, and distributors across MTB, road, gravel, and e-bike segments. Its stated capabilities include CNC machining, precision manufacturing, engineering support, and quality control systems. For a buyer evaluating the MT-030F/R, that background matters mainly in three areas: whether the five freehub variants can be supplied consistently within one program, whether branding and specification can be customized for an ODM wheel line, and what quality documentation accompanies production batches.

These are questions to raise directly rather than assume. A sensible pre-order checklist would cover the exact freehub standard per SKU, availability of spare freehub bodies, spoke interface and lacing recommendations, axle end cap configuration, bearing specification, sampling and approval steps, and the quality control criteria applied to each batch. Because ARC positions itself as a customization-oriented hub manufacturer, buyers with a defined drivetrain mix and a 24H straight-pull Center Lock wheel design have a concrete basis for a technical conversation rather than a generic inquiry.

The MT-030F/R is best understood as a platform decision. If a wheel program needs to cover Shimano HG, Road Micro Spline, SRAM XDR, and Campagnolo builds from one 24-hole straight-pull Center Lock hub design, this hub set is a reasonable candidate to put on the evaluation list, with the freehub selection, spoke interface, and supply terms confirmed with ARC before specification is finalized.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China