Compact folding bikes put unusual demands on a hub set: narrow frame spacing, small wheel diameters, low overall weight targets and drivetrain behaviour that has to stay predictable in stop-start urban riding. The ARC FT-036F/R Folding Bike Hub Set is positioned squarely at that brief, and for product managers or purchasing engineers scoping a 16- to 20-inch wheelset, it is worth reading as a specification package rather than a single component. What follows is a factual walk-through of what the set offers, where the fit conditions sit, and how to turn that into a precise sample or OEM/ODM request.
Why Compact Folding Wheel Builds Need a Dedicated Hub Set
A hub chosen for a road or MTB wheelset rarely transfers cleanly to a folding platform. The front spacing on many compact folders is narrower than a standard road hub, the rear triangle is short, and the whole build is usually judged against a weight budget where every gram on the rotating assembly matters. A general-purpose hub set either forces the frame design to accommodate it or adds material that a small-wheel build does not need.
The FT-036F/R addresses this by being specified around compact folding geometry rather than adapted to it. The 74 mm front and 130 mm rear spacing is the defining fit condition, and it is the first number a frame designer or wheel builder should check against the frame drawing. Beyond spacing, a compact wheel has fewer spokes and shorter spoke lengths, so hole counts and flange geometry have an outsized effect on how the wheel tensions and holds true. A dedicated set lets the builder work within those constraints instead of improvising.
There is also a riding-behaviour dimension. Folding bikes are typically commuter and urban machines, used in short, frequent trips with plenty of acceleration and coasting. That pattern places more emphasis on consistent engagement feel and durable bearing performance than on the peak load figures that dominate performance hub selection.
Materials and Engagement in the FT-036F/R
ARC builds the FT-036F/R around an AL6061-T6 aluminium hub shell, paired with a high-strength AL7075 aluminium axle and freehub body. The division of labour here is conventional but sensible: the shell carries the spoke loads and needs to hold flange shape and bearing bores accurately, while the axle and freehub body take the torsional and drivetrain loads. Using a higher-strength 7075 alloy for the axle and freehub body is a material choice aimed at the parts where stress concentration is highest, and it is a specification buyers can verify against the drawing rather than a marketing abstraction.
Engagement is handled by a 4-pawl, single-tooth system. ARC describes it as providing reliable power transfer and smooth drivetrain response for everyday commuting and urban riding. For a specifier, the useful reading is that this is a multi-pawl layout intended for regular, moderate-load pedalling input rather than a competition-focused engagement design. Pawl count and tooth geometry influence how drive torque is distributed and how the hub feels under load, but engagement feel is also shaped by spring rate, lubrication and the rest of the drivetrain, so it should be evaluated as one variable in a sample build rather than treated as a standalone performance figure.
Spoke Hole Counts and Build Flexibility
Drilling options give the wheel builder room to match the hub to the rim and the intended rider load. The front hub is offered in 16H, 18H, 20H and 24H configurations; the rear in 16H, 20H, 24H and 28H. On a compact wheel, a 16H or 18H front build keeps the spoke count low for weight, while the rear can step up to 24H or 28H where the driven wheel carries more load and benefits from additional spoke support.
The J-bend spoke design is a practical detail rather than a trivial one. J-bend spokes remain widely stocked, are familiar to most wheel builders, and allow lacing patterns to be adjusted without requiring straight-pull-specific tooling or inventory. For a brand commissioning a small-wheel wheelset, that can simplify both prototyping and after-sales spares planning.
Hole count and lacing should be decided together with rim availability. A 28H rear drilling is only useful if the rim exists in that count and the spoke lengths can be sourced for the resulting flange geometry, so it is worth confirming rim and spoke supply before locking the hub configuration.
Fit Conditions: Spacing, Freehub and Bearings
Four specification points determine whether the FT-036F/R drops into a given build.
- Spacing. 74 mm front and 130 mm rear. Both should be checked against the frame drawing, including dropout type and any required spacers, before ordering.
- Freehub compatibility. The set is compatible with the Shimano HG standard, which keeps cassette sourcing straightforward for commuter and urban drivetrains. Builders using other freehub standards should raise this explicitly in the enquiry rather than assume coverage.
- Bearing option. S&S steel bearings are listed as an option, so the bearing specification should be stated on the purchase specification rather than left to default.
- Quick releases. QR001 quick releases are included with the set, which simplifies the bill of materials for a complete build.
Total weight is approximately 304.4 g for the set. On a compact folding wheelset that figure is a meaningful part of the rotating mass, and it is best compared against the rest of the build — rim, spokes, tyre and cassette — rather than evaluated in isolation. As with any weight figure, the exact value depends on configuration, so the drilling and bearing choices should be confirmed against the final specification.
Specifying the FT-036F/R with ARC
Turning these facts into a workable order means converting the build requirements into a short, precise specification. In practice that is a list: front and rear spacing, front and rear hole counts, freehub standard, bearing option, quick release inclusion, intended rim and spoke combination, and the target wheel weight. Sending that alongside the frame drawing gives a hub manufacturer everything needed to confirm fit rather than guess at it.
This is where ARC's position as a hub manufacturer with OEM and ODM capability becomes relevant. Taicang Xiangyue Sports Equipment Co., Ltd. has been producing bicycle hubs since 2013 from its base in Taicang, Jiangsu, and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors. For a folding-bike programme, that means the FT-036F/R can be discussed as a starting specification — with drilling, bearing and branding decisions treated as part of the development conversation — rather than as a fixed catalogue item only.
The practical next step for a brand or wheelset builder evaluating this hub set is a sample build on the intended rim and frame. That is the point where spacing, hole count, engagement feel and bearing choice can be verified together under real assembly conditions, and where any adjustment to the specification can be identified before a production commitment. Buyers who already know their frame spacing and target hole counts will find the FT-036F/R a well-defined starting point, and the ARC FT-036F/R Folding Bike Hub Set product page is the right place to confirm the current configuration details before opening that conversation with ARC.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China