What Fixed-Gear Builders Need From a Track Hub
On a fixed-gear bike, the hub is not a passive component. The sprocket is threaded directly onto the hub, and every pedal stroke, every skid, and every hard acceleration passes through that connection. A track hub that loses sprocket tension or allows the cog to creep under load creates an immediate safety problem, and for builders assembling wheels for track racing or street fixed-gear use, the locking method is often the first specification they examine.
The demands on a fixed-gear track hub are therefore narrower and more specific than on a geared hub. The shell must hold bearing alignment under chain tension. The axle and end caps must resist the torsional loads that come from engine braking on a fixed drivetrain. The sprocket interface must remain tight through repeated high-torque efforts without requiring constant re-tightening. And for custom wheel programs, the hub dimensions must be documented clearly enough that rim drillings, spoke lengths, and flange geometry can be confirmed before the build begins.
The ARC GT-002FR CNC Track Hub is positioned around exactly these priorities: an integrated locking structure, double-sided fixed-gear threading, and a fully CNC-machined construction. For builders evaluating whether this hub suits a track or fixed-gear project, the useful question is not simply whether it is lightweight, but whether its locking method and documented structure give the wheel builder enough confidence to commit.
Inside the GT-002FR: Materials and Locking Structure
The GT-002FR uses a fully CNC-machined AL6061-T6 hub shell, paired with an AL7075 aluminum axle, freehub components, and end caps. That material split is worth reading carefully, because it reflects a deliberate division of labor rather than a single blanket specification. AL6061-T6 is a common choice for hub shells where machinability, corrosion resistance, and consistent wall thickness matter. AL7075 is a higher-strength aluminum alloy often selected for load-bearing parts such as axles and end caps, where stiffness and fatigue resistance under cyclic loading are more critical.
The headline structural feature is the integrated locking structure. In a conventional threaded fixed-gear setup, the cog is threaded onto the hub and secured by a separate lockring that threads onto the hub's outer step. The GT-002FR's internal lock structure refers to the way the locking mechanism is built into the hub body rather than being a purely external afterthought. For builders, the practical implication is that sprocket retention is treated as a designed part of the hub architecture.
This matters most under the loads that define fixed-gear riding. A track sprinter's standing start and a street rider's repeated skid both apply torque in both directions, and a cog that is not held firmly can develop play. A locking structure designed into the hub gives the builder a more controlled interface to work with during assembly.
It is important to separate what the specification states from what it does not. The product information confirms the materials and the integrated locking structure. It does not publish torque values, bearing specifications, or fatigue test results, and those details should be requested directly from ARC before a production order is placed.
Sprocket Setup With the 16T Cog and Lockring
The GT-002FR ships with a 16T fixed-gear cog and lockring, and the hub carries double-sided fixed-gear threading. For a first build, the included cog means the buyer can assemble and test the wheel without sourcing a separate sprocket, which shortens the evaluation cycle for a custom wheel program.
The double-sided threading is the more interesting detail for setup flexibility. Fixed-gear riders commonly run a single cog on the drive side, but a hub with threading on both sides allows the builder to configure the drivetrain side according to the frame's dropouts and chainline, or to plan a flip-flop-style setup where the second side carries a different ratio or a freewheel where the frame and local regulations permit. For track bikes, the ability to set the chainline precisely against a specific frame is a practical advantage during wheel building, since the dish and spoke tension can be planned around a known flange position.
The 16T cog is a mid-range ratio that suits track training and many street builds, depending on chainring size and intended cadence. Builders should treat the included 16T as a starting point rather than a fixed choice; the ratio that works for a velodrome effort differs from what a street rider wants. The lockring included with the hub is the correct companion piece for the cog, and the assembly sequence—cog first, then lockring, with the lockring tightened against the cog rather than the hub shoulder—should be followed as with any threaded fixed-gear interface.
Where the GT-002FR Fits in Custom Wheel Programs
Custom wheel builders and small-frame brands often need a hub that is both technically suitable for fixed-gear use and available in a configuration that matches their rim, spoke count, and axle standard. The GT-002FR is aimed at that space: track bikes and custom fixed-gear wheel builds, where the hub is specified as part of a complete wheel rather than bought off a shelf.
This is also where ARC's manufacturing profile becomes relevant. ARC is a bicycle hub manufacturer based in Taicang, Jiangsu, China, founded in 2013, specializing in the research, development, manufacturing, and customization of high-performance hubs. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers, and distributors. For a wheel program that needs a fixed-gear hub with a defined locking structure and a documented material specification, that combination of CNC machining capability and customization experience is a reasonable basis for an initial conversation.
The GT-002FR is a single, specific product, and it should be evaluated as such. Builders considering it for a custom program should confirm that its flange geometry, spoke hole count, and axle configuration match the rims and frames they intend to use, and should ask ARC directly about the configurations available for OEM or ODM orders. The product page for the ARC GT-002FR CNC Track Hub is the appropriate starting reference for the published specification.
For brands developing a fixed-gear or track wheelset, ARC's CNC machining and precision manufacturing capabilities are the relevant part of the offer, since shell machining accuracy affects bearing seat alignment and, in turn, how smoothly the assembled wheel runs. The company's stated focus on strict quality control systems is also relevant to batch consistency when more than one hub is ordered for a production run.
Specification Questions to Confirm Before Ordering
The GT-002FR specification answers the structural questions—materials, locking method, threading, and included cog—but a production purchasing decision usually needs more. Before committing to a custom wheel program or an OEM order, buyers should confirm the following directly with ARC:
- Axle standard and spacing, and whether the end caps are configurable for different frame interfaces.
- Spoke hole count and flange dimensions, including flange diameter and center-to-flange distances, so spoke lengths can be calculated.
- Bearing type and serviceability, including whether bearings are pressed or threaded and how they are replaced.
- Recommended assembly torque for the cog and lockring, and any thread preparation guidance.
- Available finishes or branding options for OEM/ODM orders, and the documentation ARC can provide for the specification.
- Order quantities, lead times, and sampling process for a first production run.
These are the items where published product information typically stops and supplier dialogue begins. ARC's OEM and ODM experience with bicycle brands and wheel manufacturers makes it a sensible candidate to approach with these questions, particularly for builders who need a fixed-gear hub with an integrated locking structure rather than a generic threaded hub.
For track and fixed-gear builders, the GT-002FR's case rests on its locking architecture and material specification. Builders whose priority is secure sprocket retention, double-sided threading for setup flexibility, and a CNC-machined shell from a manufacturer with customization experience will find it worth including in their supplier evaluation. The next step is to confirm the dimensional and axle details against the specific wheel and frame the build will use, and to ask ARC what configurations are available for the intended order volume.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China