Internal Gear

ARC IGH-001R 2-Speed Internal Gear Hub: Specs and Wheel-Building Options

13 min read
On this page 5 sections

The ARC IGH-001R 2-Speed Internal Gear Rear Hub is designed for urban commuting, utility cycling and practical everyday wheel builds, and its specification sheet answers the first question most wheel builders and product planners ask: does this hub give enough spoke-hole choice and drivetrain simplicity to fit a commuter wheel programme without custom tooling? The short answer is yes, within the documented limits. The hub combines a 2-speed internal gear system with a J-bend spoke flange drilled in 16H, 18H, 20H, 24H, 28H, 32H and 36H configurations, so rim and spoke selection can be matched to the intended duty cycle rather than forced into a single lacing pattern.

What the IGH-001R Is Built For

The IGH-001R sits in the commuter and utility segment rather than performance road or mountain categories. Its purpose is a compact internal drivetrain that keeps shifting components enclosed, which suits city bikes, cargo-adjacent utility frames and everyday bikes where low maintenance and a clean silhouette matter more than close-ratio gearing.

That positioning shapes the specification choices. A 2-speed internal gear system gives a usable spread for flat urban routes and moderate gradients while keeping the hub body compact. The four-bearing configuration is documented as supporting stable rotation and long-term durability, which is relevant for bikes that see frequent stop-start riding and variable weather. For product planners, the practical takeaway is that this hub belongs in a simple, robust commuter build rather than in a high-performance application.

Documented Specifications at a Glance

The component list is short and specific, which makes it easy to check against a frame and wheel specification before sampling.

  • Hub shell: AL6061-T6 aluminum, chosen for a balance of weight and structural strength.
  • Axle: CR-MO steel, providing high-strength load carrying at the hub centre.
  • Drive component: AL7075 aluminum, a higher-strength aluminum grade used for the driven interface.
  • Gear system: 2-speed internal gear with a 3-pawl, single-tooth engagement structure, documented as delivering reliable power transfer and smooth operation.
  • Bearings: four-bearing configuration supporting stable rotation and long-term durability.
  • Spoke interface: J-bend design, drilled in 16H, 18H, 20H, 24H, 28H, 32H and 36H.
  • Supplied parts: a 12T sprocket and a hook-type washer.

The 12T sprocket and hook-type washer matter for wheel builders because they affect drivetrain setup and chainline planning; they should be included in the bill of materials rather than assumed as separate purchases. The material stack also tells a consistent story: aluminum where weight and machining precision help, steel where load concentration is highest.

Choosing a Spoke Count for Your Wheel Build

The 16H–36H drilling range is the most useful part of the specification for wheel builders, because it allows one hub platform to serve several rim and use cases. The right count depends on the wheel's role, rim stiffness and the rider load the bike is designed for.

Spoke countTypical wheel-building fit
16H / 18HLightweight city wheels with stiff, shallow-depth rims; fewer spokes to tension and true
20H / 24HStandard commuter builds balancing rim choice and spoke availability
28H / 32HUtility and heavier-rider builds where load sharing across more spokes is preferred
36HMaximum spoke count for robust everyday wheels and conservative build practice

These pairings are planning guidance, not a performance guarantee: actual wheel strength depends on rim stiffness, spoke type and tension, lacing pattern and rider load. The J-bend interface is the key detail. J-bend spokes are widely stocked and familiar to most wheel builders, which shortens sourcing and simplifies replacement in service networks. Because the flange is drilled across seven counts, a brand can standardise on the IGH-001R for a commuter range and still differentiate wheel models by spoke count and rim without changing the hub.

Before committing, builders should verify flange dimensions, spoke hole diameter and rim drilling against the intended spoke and nipple, and confirm frame dropout and axle compatibility with the hub drawing. Those are standard checks and should be done against the current specification sheet, not assumed.

Planning an OEM or ODM Order with ARC

Once the specification matches the wheel programme, the next step is a sourcing conversation. ARC is a professional bicycle hub manufacturer and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, which fits a buying process that starts with specification review and moves to samples and customisation. The IGH-001R itself is the relevant product for urban commuting and utility programmes, with its documented material stack, 2-speed internal gear system, four-bearing configuration and 16H–36H spoke drilling available as the basis for evaluation.

A practical sampling plan would confirm the spoke count and rim pairing on a complete wheel, check the 12T sprocket and hook-type washer in the drivetrain setup, and validate frame fit before moving to production discussions. ARC's CNC machining and quality control environment supports the ODM conversation around shell finish, drilling and supplied-part configuration; specific customisation options, minimum quantities and lead times should be confirmed directly with ARC as part of that discussion.

For wheel builders and product planners evaluating an internal gear hub for commuter and utility lines, the IGH-001R offers a documented specification with an unusually wide spoke-hole range and familiar J-bend construction. Matching spoke count to rim and rider load, then verifying dropout, chainline and supplied parts, is the right path to a confident build decision, and ARC is a sensible partner to include in the sampling and OEM/ODM evaluation for this category.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China