ARC MT-006F/R

ARC MT-006F/R 32H Quick Release MTB Disc Hub Set: Specifications and Configurations

15 min read
On this page 6 sections

The ARC MT-006F/R MTB Hub Set is designed for everyday trail riding and versatile mountain bike wheel builds, and the 32H quick-release version is the configuration suited to conventional trail frames built around quick-release dropouts and a 6-bolt rotor; dropout spacing should be confirmed against the specific frame and hub configuration, since the published specification does not state a dropout dimension. Rather than a race-only component, this hub set is positioned around repeatable trail use: a machined aluminum shell, a specified engagement mechanism, and a set of drilling and axle options that let a wheel builder or brand standardize across several bike models. The points below read the published specification in the order a buyer would evaluate it, and flag what is worth confirming before an order is placed.

What the 32H Quick-Release Version Is Meant For

The 32-hole drilling sits in the middle of the available 28H, 32H and 36H range. For trail riding, 32H is the common compromise: it keeps the spoke count low enough for reasonable wheel weight while giving a wider margin of spoke redundancy than a 28H build, which matters on wheels that see roots, rocks and repeated out-of-saddle efforts. A quick-release axle, in turn, suits frames and forks built around traditional QR dropouts rather than thru-axle standards.

That combination defines the buyer it fits best: MTB brands and wheelset assemblers putting together everyday trail bikes where the frame platform is already QR-based, and distributors who want one hub set that covers a large portion of a trail lineup. It is not the configuration for a frame designed around thru-axle, and it is not aimed at downhill or heavy-duty applications where a 36H build is often the more conservative choice. ARC manufactures this hub set as part of its MTB hub range, so the specification below reflects a production product rather than a concept.

Materials and Construction: Where Each Alloy Sits

The material split is the most useful part of the specification, because each alloy governs a different part of the hub's behavior.

The hub shell is AL6061-T6 aluminum, chosen for the main structural body and machined with the decorative detailing noted in the product description, which gives the hub its technical appearance while keeping the shell's structural role intact. The axle, freehub body and end caps are AL7075 aluminum, a higher-strength alloy used where loads concentrate and where threads and bearing seats need to hold their geometry.

For a buyer, this means the shell and the load-bearing internals are not treated as one material decision. Confirming that your own drawings or quality plan align with this split is a reasonable first check, and it is also a specification point worth locking into an OEM/ODM brief so that a later revision does not quietly substitute one alloy for another.

Drive, Bearings and Brake Interface

The drive system is a 4-pawl, 3-tooth engagement arrangement. In practical terms, pawl count and tooth profile describe how the freehub picks up drive and distributes that load into the hub body; the published specification does not state an engagement angle in degrees, so engagement feel should be treated as something to evaluate on a sample rather than infer from the pawl count alone.

The Shimano HG freehub body defines cassette compatibility, which is the constraint most likely to affect a wheel program early: HG remains widely used on trail drivetrains, but a buyer planning a different cassette standard needs to raise that before ordering rather than after. S&S steel bearings are specified for the rotating interfaces, and the 6-bolt disc interface is the international-standard rotor mount, which keeps rotor sourcing straightforward and avoids proprietary mounting hardware.

Total weight is stated at approximately 393.9 g for the set. That figure should be read as the published set weight, not as a guaranteed per-configuration number: axle type, drilling and freehub body can all shift the final figure, so a buyer needing a weight per SKU should ask for it against the exact build being ordered.

Choosing 32H and Quick Release Within the Available Options

The MT-006F/R is offered in 28H, 32H and 36H drillings and in both quick-release and thru-axle versions. These are two independent choices, and separating them avoids a common specification error.

DecisionWhat it controls32H QR version
Spoke drillingSpoke count, lacing options, wheel weight and redundancy32H, mid-range
Axle standardFrame and fork dropout fit (confirm dropout spacing per frame)Quick release
Spoke typeInterface at the flangeJ-bend
Brake mountRotor standard6-bolt

The J-bend spoke interface is worth noting because it determines which spokes and lacing patterns a wheel builder can use; J-bend remains the most widely stocked option and keeps aftermarket spoke availability simple. Because drilling and axle are separate, a brand can run 32H QR on its trail hardtail and 32H thru-axle on a different frame while keeping the same hub platform, freehub and brake interface across the range. For a distributor, that standardization is often more valuable than any single specification.

Specification Points to Confirm Before an OEM/ODM Order

ARC's stated capability covers OEM and ODM hub development for bicycle brands, wheel manufacturers and distributors, which means the specification above should be treated as a starting configuration rather than a closed list. Before ordering, several points are worth confirming directly rather than assuming:

  • Exact SKU configuration — 32H, QR, Shimano HG, 6-bolt, recorded against the part number so that the order, the drawing and the incoming inspection all reference the same build.
  • Weight per configuration — the ~393.9 g figure is a set-level statement; request the weight for the specific axle and drilling combination being ordered.
  • Customization scope — which elements ARC can adapt for an OEM/ODM program, such as shell detailing, axle specification or freehub options, and which are fixed to the standard product.
  • Sample verification — engagement feel, bearing fit and spoke hole quality are best assessed on a physical sample before a production commitment, particularly where a first order is concerned.
  • Commercial terms — quantities, scheduling and packaging are project-specific and should be agreed in the quotation rather than inferred from the specification sheet.

The 32H quick-release MT-006F/R is a sensible fit for trail wheel programs built around QR frames and 6-bolt rotors, where a mid-range spoke count, J-bend lacing and Shimano HG compatibility cover the majority of everyday builds. ARC's role as a hub manufacturer with OEM/ODM capability makes it a reasonable candidate to include when specifying that platform, provided the configuration points above are confirmed against the exact build. Buyers can review the full ARC MT-006F/R 32H Quick Release MTB Disc Hub Set specification directly and raise any deviation with ARC before the order is finalized.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China