The ARC MT-009F/R Boost Center Lock MTB hub set is built around a fairly specific idea: give trail, all-mountain and enduro riders a hub platform with fast engagement, Boost-era fitment and a material mix aimed at durability, without pushing the wheelset programme into exotic or hard-to-service territory. For product managers and wheelset engineers, the useful question is not simply what the numbers are, but which of them actually constrain a build decision. The specifications below are the ones that matter most when matching the hub to a frame, a drivetrain and a rider segment.
What the MT-009F/R Is Positioned For
The MT-009F/R sits in the segment where hubs are expected to survive repeated heavy landings, off-camber root sections and sustained braking on long descents. Trail, all-mountain and enduro riding share a common mechanical demand: the rear hub has to convert intermittent pedal input into forward drive quickly, and it has to do so without the shell or drive ring deforming under torque. That is the frame in which the MT-009F/R's stated features should be read.
For a brand building a wheelset line, this positioning also implies a price and serviceability tier. A hub set intended for these categories usually needs to be available in multiple spoke counts so that one platform can serve a 28-hole lightweight trail build and a 32- or 36-hole enduro build, and it needs freehub options that cover the common drivetrain standards in the target market. The MT-009F/R addresses both points, which is what makes it relevant as a platform rather than a single-SKU part.
ARC, the Taicang-based hub manufacturer founded in 2013, produces this set within an OEM/ODM framework for bicycle brands, wheel manufacturers and distributors. That matters for buyers because the specification list below is not a fixed retail configuration; the questions worth asking are about which combinations are available and how they are validated.
Materials and Drive System Specifications
The shell is AL6061-T6 aluminium, while the axle, freehub body and end caps are AL7075 aluminium. This split is worth understanding rather than skimming. AL6061-T6 is a common choice for hub shells because it offers a good balance of machinability, corrosion behaviour and structural toughness at the wall thicknesses used in hub bodies. AL7075 is a higher-strength alloy, and using it for the axle and freehub body targets the parts that see the most concentrated torque and the most wear from cassette interface loads. End caps in the same alloy suggest a consistent approach to the high-stress small parts rather than a mixed-material assembly.
The engagement system is a 6-pawl, 3-tooth design stated to deliver 120-point engagement. In practice, a 120-point ratchet gives notably short pickup, which is the characteristic trail and enduro riders notice when they need to get power down after a quick back-pedal through a technical section. Two related claims deserve attention: the wide-pawl design is stated to increase contact width by approximately 36%, and the reinforced drive ring is stated to expand the load-bearing surface by approximately 35%. Both figures point at the same engineering concern — spreading torque across a larger contact area to reduce stress concentration and improve fatigue resistance. Buyers should treat these as manufacturer-stated design figures and confirm the test basis during technical review, since contact-area improvements depend on how the pawls and ring are measured.
Fit and Compatibility: Boost Spacing, Freehub, Rotor Mount and Drilling
The spacing is 15×110 mm front and 12×148 mm rear, the Boost standard for current mountain bike frames and forks. For a wheelset programme, this is the first filter: Boost frames and forks will not accept older non-Boost hubs without adapters, and Boost hubs will not fit legacy frames. Confirming the frame and fork standard before anything else avoids the most common mismatch in a new build sheet.
The hub set uses a Center Lock disc interface and a J-bend spoke design. Center Lock narrows rotor choice to Center Lock-compatible discs and simplifies installation, while J-bend spokes keep the wheel buildable with standard spoke stock and conventional lacing patterns — a practical advantage for distributors who support many workshops. Drilling options are 28H, 32H and 36H, which maps sensibly onto the intended categories: 28H for lighter trail wheels, 32H as the general all-mountain choice, and 36H where enduro or heavier riders call for more spokes.
Freehub compatibility covers Shimano HG, Micro Spline and SRAM XD. That trio covers the dominant mountain drivetrain standards, so a brand can offer the same hub platform across Shimano and SRAM builds without a separate hub. Purchasing teams should confirm which freehub bodies are stocked, whether they are interchangeable on the same shell, and what the swap procedure involves, because freehub availability is often the difference between a platform that scales and one that creates inventory complexity.
Weight, Bearings and Points to Confirm Before Sampling
The stated total weight is approximately 427.7 g for the set. Buyers should establish the weighing configuration behind that figure — whether it refers to a specific drilling, freehub and bearing combination — because hub weight varies with these choices, and a set weight quoted without configuration context is difficult to compare against competing platforms.
Bearings are listed as S&S steel options. Steel bearings are a reasonable default for mountain applications where load and contamination resistance matter more than minimum rotational drag. The useful questions are which bearing sizes are used at each position, whether the specification is fixed or selectable, and what service access looks like in the field.
Before committing to samples, it is worth building a short confirmation list: exact available combinations of drilling, freehub standard and bearing option; the drawing set with axle, flange and offset dimensions for wheel-building calculations; the stated engagement and contact-area figures with their test basis; and the OEM/ODM terms covering configuration flexibility, sample quantities and production scheduling. ARC's CNC machining, precision manufacturing and quality control capabilities support this kind of technical dialogue, and the MT-009F/R is a natural starting point for brands developing trail, all-mountain or enduro wheelsets. Buyers evaluating this hub set can reasonably place it on a shortlist for those segments and use the sample stage to verify the configuration details that the published specification leaves open.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China