ARC MT-009F/R MTB Disc Hub

ARC MT-009F/R MTB Disc Hub Set: Spoke Counts and Axle Configurations

13 min read
On this page 4 sections

Wheel builders and product planners rarely get to treat spoke count and axle standard as an afterthought. Both are locked in early: the rim and intended riding use point to a drilling, and the frame or fork dropout dictates the axle. The ARC MT-009F/R MTB disc hub set answers both decisions within a single model, offering 28H, 32H and 36H J-bend drilling alongside quick-release and thru-axle configurations. That breadth is what makes it worth examining before a wheel program is finalized.

Spoke Counts: 28H, 32H and 36H in One J-Bend Hub Set

The MT-009F/R is drilled for 28H, 32H and 36H spoke configurations, all using a J-bend design. For a wheel builder, this means the hub family can be matched to the rim without switching to a different model or supplier. J-bend spokes remain the common choice in many workshops because they are widely stocked, easy to source in varied lengths, and familiar to mechanics building and servicing wheels.

The three counts serve different build logics rather than being interchangeable options. A 28H build keeps the spoke count lower, which suits riders and programs prioritizing a lighter wheel where the rim is stiff enough to carry the load across fewer spokes. A 32H build is the middle ground many trail and all-mountain builds default to, balancing strength and weight. A 36H build raises the spoke count for builds where redundancy and load sharing matter more, such as heavier riders or tougher duty. The correct choice follows the rim's drilling and the intended rider load—the hub simply needs to match it.

Because the MT-009F/R spans all three drillings, a wheel brand can consolidate around one hub set across a size or model range, then vary the drilling per build. That simplifies sourcing and keeps spoke interface behavior consistent across the lineup. ARC manufactures the set with this range deliberately, so the choice of drilling stays a build decision rather than a supplier constraint.

Axle Configurations: QR and Thru-Axle Options

The axle side of the specification is where frame compatibility is won or lost. The MT-009F/R is available in 9×100mm front and 10×135mm rear quick-release, and in 15×100mm front and 12×142mm rear thru-axle options. These are distinct configurations, not adapters bolted onto one another, so the pairing should be confirmed against the actual dropout standard of the frame and fork the wheel will serve.

Quick-release remains relevant for older frames, entry-level builds, and programs where the frame standard is already fixed at 9×100mm and 10×135mm. Thru-axle, at 15×100mm front and 12×142mm rear, is the common modern trail and all-mountain standard, and it is the configuration most current MTB frame platforms are built around. A product planner specifying one hub set across different frame generations can therefore cover both standards from the same model family—provided each build's axle variant is ordered correctly.

Two practical points follow. First, front and rear are configured as a set: a 15×100mm front paired with a 12×142mm rear thru-axle build, or a 9×100mm front with a 10×135mm rear QR build. Mixing front and rear standards across a single bike is unusual, so the pair should be treated as one decision. Second, the axle choice affects how the wheel seats and is retained, so it should be settled before rims and spokes are ordered. ARC offers the MT-009F/R in multiple axle configurations precisely so that one hub family can serve several frame specifications, which is useful for brands building a range that spans both standards.

Specification Details to Confirm Alongside Spoke and Axle Choice

Spoke count and axle standard are the headline decisions, but a hub order is finalized on a few more items that must line up with the rest of the build. The MT-009F/R uses a 6-bolt disc brake interface, so rotors must be the 6-bolt type rather than Center Lock. The freehub must match the drivetrain: the set is compatible with Shimano HG, Micro Spline and SRAM XD freehub standards, and the correct body should be named at order time so the cassette mounts as intended.

Bearing specification is another item to confirm. ARC lists S&S steel, ENDURO and CeramicSpeed bearing options for this model, so buyers can align the bearing choice with their service and performance expectations rather than accepting a default. Anodized colors are customizable as well, which matters for brands coordinating hub finish with the rest of the build, and the complete hub set is stated at approximately 438.2g.

For context on intended use, the hub uses a reinforced 6-pawl, 3-tooth engagement system with a 120-click mechanism, widened pawls stated at roughly 36% greater contact width, and a reinforced drive ring stated at roughly 35% more load-bearing surface. The shell is forged AL6061-T6 aluminum alloy, with AL7075 used for the axles, freehub body and end caps. These details describe the trail and all-mountain design intent; they should be read as the model's documented construction rather than as a guarantee of a specific outcome in any given build, since wheel performance also depends on rim, spoke, tire and riding conditions.

For OEM and ODM wheel programs, the practical sequence is straightforward: fix the dropout standard to select the axle variant, match the rim's drilling to choose 28H, 32H or 36H, then confirm freehub standard, disc interface, bearing option and finish before the order is placed. ARC, as a bicycle hub manufacturer working with brands and wheel builders on OEM and ODM projects, builds the MT-009F/R around exactly this kind of specification matching—one hub set covering the spoke counts and axle standards that trail and all-mountain wheel programs commonly require. Buyers who need to serve both QR and thru-axle frames from a single hub family will find the MT-009F/R a practical candidate to include in their supplier evaluation, with the ARC MT-009F/R 28/32/36H MTB Disc Hub Set detail page available for confirming the exact variant against a specific build.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China