ARC MT-028F/R Road Hub

ARC MT-028F/R Road Hub Set: T-Head Carbon-Spoke Fit for OEM Builds

19 min read
On this page 6 sections

What This Hub Set Is Built For

Carbon-spoke road wheelsets place different demands on a hub than conventional steel-spoke builds. Spoke holes must match the specific anchoring geometry of the carbon spoke, flange dimensions influence how straight the spoke path runs, and the drive mechanism has to deliver consistent engagement under the higher tension loads that stiffer carbon spokes can transmit. Buyers sourcing for these programs are rarely looking for a general-purpose road hub; they need a component whose spoke interface, axle standard and freehub options already align with the wheelset they intend to produce.

The ARC MT-028F/R Road Hub Set is positioned specifically for high-performance carbon-spoke road wheel builds. Rather than adapting a hub originally designed around J-bend or straight-pull steel spokes, this set carries a dedicated T-head spoke configuration on both front and rear hubs, combined with a Center Lock disc interface. That combination—T-head carbon-spoke compatibility plus Center Lock—is the defining characteristic to evaluate first, because it determines whether the hub can be used with the spoke system a wheelset brand has already qualified.

For OEM and ODM buyers, the practical question is not simply whether the hub is "light" or "stiff," but whether its interface assumptions match the build sheet. A hub set built around T-head carbon spokes removes a compatibility step that would otherwise require custom drilling or spoke adapters, and it lets the wheelset designer work from a known baseline for flange geometry and spoke count. ARC manufactures and customizes bicycle hubs for wheelset brands and road bike OEMs, and the MT-028F/R sits within that road-oriented range rather than being a repurposed MTB hub.

Spoke Interface and 21H 2:1 Layout

The MT-028F/R uses dedicated T-head holes designed for Hongji Weiye Type B and Type C carbon spokes. This matters because carbon spokes are not interchangeable at the hub end in the way steel spokes often are; the head shape, the slot geometry and the seating surface all affect how load transfers into the flange. A hub drilled for a generic spoke head may physically accept a T-head spoke but seat it poorly, concentrating stress and complicating tensioning. The MT-028F/R's T-head holes are specified for the named Hongji Weiye types, which gives the wheelset engineer a defined starting point for spoke selection and tension targets.

Both front and rear hubs use a 21-hole, 2:1 spoke configuration. In a 2:1 layout, the spoke count is split unevenly between the two flanges—typically twice as many spokes on one side as the other—to balance the asymmetric loads created by the disc brake and the drivetrain. On the rear hub, the cassette side and the non-drive side see different forces, and on a disc-brake front hub the brake side carries additional torsional load. The 2:1 arrangement is intended to optimize spoke tension balance and wheel stiffness, which is especially relevant with carbon spokes that run at higher tension and transmit loads more directly into the rim.

For buyers, two details deserve confirmation during specification review. First, the exact Hongji Weiye Type B or Type C spoke model should be matched to the hub hole specification, since the two types are not identical. Second, the intended lacing pattern and target tension should be agreed with ARC before sampling, because the 2:1 configuration's benefit depends on the spoke and rim being designed around the same load distribution. The hub supports the layout; the wheelset's overall stiffness and durability still depend on rim choice, spoke specification and build quality.

Brake, Axle and Drivetrain Fit

The Center Lock disc interface is a standard, widely supported mounting system, and specifying it here keeps the hub compatible with the common Center Lock rotor range rather than locking the wheelset into a proprietary mount. For road and all-road builds that increasingly use disc brakes, that is a practical sourcing advantage: rotor availability and interchangeability remain straightforward.

Axle spacing is 12×100mm front and 12×142mm rear thru-axle, the prevailing standard for modern road disc frames. Buyers should still verify against their frame and fork specification, since a small number of road frames use alternative spacing, and thru-axle thread pitch and length are frame-defined rather than hub-defined. The hub set covers the spacing; the axle itself is normally supplied with the frame or chosen separately.

On the drivetrain side, the MT-028F/R supports Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. That breadth is significant for OEM programs because it allows a single hub platform to serve multiple complete-bike specifications without redesigning the hub shell. A wheelset brand supplying several bike brands, or a bike OEM offering different groupset tiers, can consolidate around one hub set and vary only the freehub body. Before committing, buyers should confirm which freehub bodies are available for the specific production run and whether the cassette they intend to use matches the freehub designation exactly—Micro Spline and HG, for example, are not interchangeable even where the hub shell is shared.

Materials, Ratchet and Weight Points to Confirm

The hub shell is AL6061-T6 aluminum, while the axle, freehub body and end caps use high-strength AL7075 aluminum. This material split is a common approach in performance hubs: the shell benefits from 6061-T6's machinability and toughness, while the loaded, wear-prone parts use 7075 for higher strength at low weight. Buyers evaluating durability should note that the freehub body is aluminum, which is normal in this class but means cassette spline wear under high-torque use is a factor to monitor and, where relevant, to discuss with ARC in terms of expected service conditions.

The drive mechanism uses a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture. The two tooth counts represent different engagement trade-offs: a higher tooth count generally gives quicker engagement and a smaller engagement angle, while a lower count can suit riders or applications where the priority is different. Because both options are offered, the choice should be made against the target bike's use case and the brand's positioning rather than assumed. The one-piece ratchet construction is described as contributing to reliable engagement, efficient power transfer and structural rigidity; buyers should confirm the ratchet option at the sample stage and evaluate engagement feel and noise against their own benchmarks.

The approximate weight is 355.6g for the hub set. This is a claimed figure, and buyers should confirm it for the exact configuration ordered—freehub standard, ratchet tooth count and end cap specification can all shift the final number slightly. Treating the figure as a reference for the base specification, rather than a guaranteed value for every variant, is the safer approach when comparing against competing hub sets.

Sampling and OEM/ODM Evaluation Steps

Because the MT-028F/R is a specification-matched component, the most efficient path to a decision is a structured sample evaluation rather than a catalogue comparison. A practical sequence for wheelset brands and road bike OEMs would begin with confirming the spoke model: verify that the Hongji Weiye Type B or Type C spoke intended for production matches the hub's T-head holes, and agree the lacing pattern and target tension with ARC. Next, confirm the freehub standard against the groupset, and check that the required freehub body is available for the planned production quantity.

With those fixed, request samples built into the intended rim and spoke combination, not as bare hubs, so that spoke tension balance, wheel stiffness and engagement can be assessed in the context of the actual wheelset. During evaluation, measure the built weight against the 355.6g reference and record the exact configuration, and check rotor fit on the Center Lock interface and thru-axle fit in the target frame. Ratchet engagement feel, noise and break-in behavior should be assessed against the brand's own standards.

ARC's OEM and ODM work with bicycle brands, wheel manufacturers and distributors means the specification discussion can extend beyond the catalogue item—spoke hole configuration, freehub selection and ratchet choice are the natural points to align before a volume commitment. For buyers whose road wheel program is built around carbon spokes and Center Lock, the MT-028F/R is a hub set worth including in the sample evaluation, with the T-head spoke match and freehub specification confirmed first as the two conditions that most directly determine fit.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China