Straight-Pull Center Lock

ARC MT-037F/R 24H Straight-Pull Center Lock Road Disc Hub Set: Specifications for Wheel Builders

24 min read
On this page 6 sections

For wheel builders and product engineers shortlisting parts for a new road disc wheelset, the decisive question is rarely whether a hub looks well finished. It is whether the published specification set survives contact with the intended rim, frame, groupset and build method. The ARC MT-037F/R 24H Straight-Pull Center Lock Road Disc Hub Set is a useful case study because its specification sheet is compact but touches nearly every interface a builder has to reconcile: material selection, ratchet engagement, spoke drilling, disc mounting, axle spacing, freehub standards, bearing choice and weight.

This walkthrough maps each published parameter to the wheel-building decision it affects, so that engineering teams can judge fit before requesting samples.

What the MT-037F/R Is Built For

The MT-037F/R is positioned specifically for modern road disc brake wheel builds rather than as a cross-category hub. That framing matters at the specification stage: road disc wheelsets typically pair relatively shallow or mid-depth rims with 12 mm thru-axles, disc rotors on Center Lock mounts, and drivetrains that may come from any of the major groupset families. A hub set intended for this context needs to resolve several interfaces at once while keeping the weight and spoke count appropriate to road riding.

The published configuration reflects that intent. It is a front and rear hub set with a 24-hole straight-pull spoke configuration at both ends, a Center Lock disc interface, 12×100 mm front and 12×142 mm rear thru-axle spacing, and five freehub standards. ARC manufactures high-performance bicycle hubs and supplies OEM and ODM solutions to bicycle brands, wheel manufacturers and distributors, which is the relevant context for a part like this: it is designed to be specified into someone else's wheelset programme rather than sold as an aftermarket upgrade alone.

For a builder, the practical takeaway is that the MT-037F/R should be evaluated as a road disc platform, not as a general-purpose hub that happens to fit a road frame. Rims, spoke lengths and tension plans should be developed around the 24H straight-pull layout and the stated axle spacing from the outset.

Materials: AL6061-T6 Shell and AL7075 Axle, Freehub and End Caps

The material split on this hub set is explicit: a precision-machined AL6061-T6 aluminium hub shell, combined with a high-strength AL7075 aluminium axle, freehub body and end caps. The distinction is worth pausing on, because it separates the part that carries the spoke loads and bearing seats from the parts that see drivetrain torque and clamping forces.

AL6061-T6 is a common choice for hub shells because it machines cleanly into the flanged or straight-pull forms a builder needs, and the T6 condition gives the shell a stable, defined temper rather than a raw extrusion condition. In a straight-pull design, the shell also has to hold the spoke interface with enough accuracy that spoke lengths and lacing angles come out as planned, which is where precision machining matters more than the alloy name alone.

AL7075 is used for the axle, freehub body and end caps. These are the higher-stress elements in the assembly: the axle locates the hub in the frame, the freehub body carries cassette loads through the ratchet, and the end caps define the thru-axle interface and spacing. Specifying a higher-strength aluminium for these parts is a design decision a builder can note, but it should not be read as a published fatigue or durability figure. The material listing describes what the part is made from; it does not, on its own, establish service life, stiffness under a given load, or a comparison against any other hub. Those are questions for sample testing and for the supplier's own verification data.

What the material specification does support is a straightforward procurement judgement: the hub set uses a documented alloy for each functional zone rather than an unspecified aluminium throughout. ARC's stated CNC machining and quality control environment is the relevant background for how consistently those machined features are reproduced across production batches, which is exactly what a wheelset brand needs to confirm when moving from prototype to series supply.

Ratchet Engagement and Straight-Pull 24H Configuration

The drive mechanism is a ratchet system offered in 36T or 54T variants, built around ARC's patented one-piece ratchet architecture, described as providing reliable engagement, efficient power transfer and enhanced structural rigidity. Both tooth counts appear in the published specification, so a builder has a genuine choice rather than a single fixed configuration.

The engagement choice is a trade-off that should be matched to the rider profile and the wheelset's positioning. Higher tooth counts generally imply a smaller engagement angle, which matters for riders who are frequently accelerating, climbing technical gradients or riding in groups where pedal pick-up is noticeable. Lower tooth counts tend to suit applications where lower internal drag and a simpler, robust ratchet interface are prioritised. Because the exact engagement angle and drag figures are not stated in the material available here, those numbers should be requested from ARC rather than inferred from tooth count alone. The engineering team evaluating a road disc wheelset for a European brand will also want to understand the one-piece ratchet construction in more detail, particularly how it is machined and how the ratchet interfaces with the freehub body, before committing to a tooth count across a model range.

The spoke configuration is 24H at both front and rear, straight-pull. This is a meaningful build decision rather than a footnote. Straight-pull spokes do not have a J-bend, so the hub flange is designed around a specific spoke interface; spoke lengths, head orientation and lacing patterns must follow the hub's intended design. A 24-hole front and rear count is a relatively lean configuration, which aligns with road disc wheelsets where weight and aerodynamic efficiency are priorities, but it places more responsibility on rim selection and build quality: the builder needs a rim that is comfortable with a 24-spoke lacing plan and a tension target appropriate to the rim and spoke type. Straight-pull assembly also tends to simplify the wheel-building process in production because the spoke path is defined by the hub rather than by a bent spoke seated in a flange hole, which is relevant when a wheelset brand is scaling from sample builds to series production.

For teams standardising on straight-pull across a range, the MT-037F/R offers a consistent front and rear 24H architecture, which reduces the number of distinct build instructions a factory has to manage.

Mounting and Drivetrain Compatibility: Center Lock, Thru-Axle and Freehub Standards

The interface specification is where most compatibility questions are settled. The MT-037F/R uses a Center Lock disc brake interface, which is the splined rotor mounting system commonly used on road disc wheels and which allows rotors to be fitted with a single lockring. For a builder, Center Lock simplifies rotor installation and reduces the fastener count at the hub, but it should be confirmed against the rotor specification the wheelset will ship with.

The axle spacing is 12×100 mm at the front and 12×142 mm at the rear, the standard thru-axle format for a large proportion of current road disc frames. Builders should still verify frame dropout specification and thru-axle diameter and thread pitch with the frame supplier, because the hub's end caps define the interface and any mismatch in axle standard will surface at assembly rather than in the specification table.

Freehub compatibility is the widest part of the specification and is clearly aimed at multi-brand wheelset programmes. The published list covers Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed. That spread means a single hub model can be carried across wheelset SKUs aimed at different groupset families without redesigning the hub shell, which is a real supply-chain advantage for a wheelset brand selling into multiple European markets where the installed base of groupsets is mixed.

InterfacePublished specificationBuilder decision it affects
Disc mountCenter LockRotor selection and lockring supply
Front spacing12×100 mm thru-axleFrame and fork dropout confirmation
Rear spacing12×142 mm thru-axleFrame dropout and derailleur hanger interface
Freehub standardsShimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W, Campagnolo 11/12-speedGroupset coverage across SKUs
Spoke drilling24H front and rear, straight-pullSpoke type, length and lacing plan

The table is a planning aid, not a substitute for confirming the exact freehub body supplied with each hub variant. A builder ordering across several drivetrain standards should specify freehub bodies per SKU explicitly, since the hub set supports multiple standards but each delivered unit will carry one.

Bearings, Weight and Points to Confirm with ARC

The hub set offers steel or ceramic bearing options, and the published total weight is approximately 376.3 g. Both are relevant to a road disc wheelset brief but should be read carefully. The bearing choice is a specification decision for the wheelset's positioning: steel bearings are the conventional option, while ceramic bearings are typically specified where lower rolling resistance or a premium tier is being marketed. The published material does not quantify any performance difference between the two, so the choice should be made on product positioning and confirmed against the supplier's bearing specification rather than assumed.

The roughly 376.3 g figure is a total weight for the hub set. Builders should confirm whether that figure refers to a specific configuration, since ratchet tooth count, freehub standard and bearing type could all affect the as-built weight of a delivered pair. Using an approximate figure is normal at the specification stage, but final wheel weights for a catalogue or homologation document should be confirmed per configuration.

Before sampling, the practical checklist for a wheel builder or product engineer evaluating the ARC MT-037F/R is:

  • Confirm the engagement angle and internal details of the 36T and 54T ratchet options, and which one is recommended for the intended rider profile.
  • Request the spoke interface drawing and recommended spoke lengths for the 24H straight-pull layout with the intended rim.
  • Confirm which freehub body is supplied per SKU across the five listed standards, and whether bodies are interchangeable in the field.
  • Verify axle end cap configuration against the target frame and fork thru-axle specification.
  • Confirm bearing specification for steel and ceramic options, and the as-built weight for each configuration to be catalogued.
  • Agree sample quantity, build documentation and inspection criteria for the first production run.

An OEM or ODM conversation with ARC is the natural next step once the specification set has been matched against the wheelset brief. The MT-037F/R is a credible candidate for road disc wheelset programmes that want a defined material split, a choice of ratchet engagement, a straight-pull 24H build and broad freehub coverage from a single hub platform. Teams that need those interfaces resolved in writing, with sample builds and production consistency checks before committing to volume, will find the specification a useful basis for that discussion with ARC.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China