For a wheelset brand or OEM product manager, the real question about the ARC MT-037F/R is not whether it looks like a road disc hub, but whether its specific configuration fits a planned disc wheelset program. The MT-037F/R answers that with a defined 24-hole straight-pull, Center Lock package: an AL6061-T6 shell, AL7075 axle, freehub body and end caps, a 4-pawl 48-point engagement system, 12×100 mm front and 12×142 mm rear thru-axle spacing, and broad freehub compatibility. For buyers building performance-oriented road disc wheels, that combination is what they actually receive, and it is the basis on which this model should be evaluated.
What the MT-037F/R Is Built For
The MT-037F/R is a road disc hub set, front and rear, designed around straight-pull spokes and the Center Lock rotor interface. Those two choices already say a lot about the intended build. Straight-pull lacing gives wheel builders predictable spoke paths and avoids the J-bend area where spoke fatigue often begins, while Center Lock is the standard rotor mount for most modern road disc groupsets and makes rotor changes a simple spline-and-lockring operation.
The 24-hole front and rear configuration is equally deliberate. It sits in the range that performance road disc wheels commonly use: enough spoke count for confident braking and pedaling loads, without the visual and aerodynamic weight of a higher count. For a wheelset brand planning a coherent family of road disc wheels, a matched front and rear hub set with the same hole count simplifies rim sourcing, spoke length planning and inventory.
It is a hub set rather than a single hub, which matters for OEM buyers: the front and rear are specified as a pair, so axle spacing and bearing specification are consistent across the wheelset instead of being assembled from mismatched parts. For programs where consistency between front and rear wheels is part of the quality story, this is a useful starting point.
Material and Engagement Details That Matter to Builders
The construction uses a deliberate mix of aluminum grades. The hub shell is AL6061-T6, a widely used, weldable and machinable aluminum alloy with good corrosion behavior and predictable strength after T6 tempering. The axle, freehub body and end caps are made from high-strength AL7075 aluminum, which offers higher strength-to-weight than 6061 in machined structural parts. For OEM and wheelset customers, the value of this split is straightforward: 6061 for the shell body, 7075 where loads concentrate and where wall thickness is limited. That is a weight-efficient arrangement rather than a single-grade shortcut, and the material selection is stated directly by ARC for this model.
Engagement is handled by a 4-pawl system with single-tooth engagement, giving 48 points of engagement. In practical terms, more engagement points mean a shorter rotation before the drive engages when a rider resumes pedaling, which matters on technical climbs, in bunched riding and in stop-start traffic. The 4-pawl layout distributes drive load across multiple pawls rather than relying on a single point, which is relevant to long-term durability. For wheel builders, the engagement specification also shapes the hub's sound and feel, both of which OEM customers often treat as part of the product identity of a wheelset.
Bearings are offered with S&S steel options. The total weight of the set is stated at approximately 363 g. For sourcing engineers, these figures are best treated as design inputs to compare against a program's target wheel weight and bearing service expectations, not as a guarantee of finished wheel performance, which also depends on rim, spoke and tire choice.
Compatibility and Wheel-Building Considerations
On axle standards, the MT-037F/R uses 12×100 mm front and 12×142 mm rear thru-axle spacing. This is the dominant configuration for current road disc frames and forks, so the hub set aligns with the majority of new road disc platforms without adapters. Buyers working with legacy quick-release frames would need to look elsewhere or confirm frame compatibility separately, since this model is specified as thru-axle.
Freehub compatibility is one of the broader points of this hub set. ARC lists support for Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. For a wheelset brand, that breadth reduces the number of distinct hub configurations needed to serve different drivetrain customers, and it allows a single wheel platform to be offered in several drivetrain versions. OEM product managers should confirm which freehub body is fitted to each ordered variant, since the choices are not interchangeable at the point of sale without the correct body.
For wheel building, straight-pull spokes with 24 holes front and rear require the builder to plan spoke lengths around the specific flange geometry and lacing pattern. Because straight-pull hubs cannot be re-laced as freely as J-bend hubs, getting the lacing pattern right at the sample stage is worth the effort. Center Lock also means rotor installation does not affect spoke or hub flange design, keeping the build process simpler.
How ARC Supports OEM and Wheelset Programs
ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer established in 2013 in Taicang, Jiangsu, China, focused on the development, manufacturing and customization of performance hubs. The company provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, and its work spans road, mountain, gravel and e-bike applications. For a road disc wheelset program, that means the MT-037F/R can be discussed as part of a customization conversation rather than only as a catalog item.
The practical value for OEM and wheelset customers lies in matching the hub's defined configuration to a target build. A buyer can evaluate the AL6061-T6 shell and AL7075 axle, freehub and end caps against weight and durability targets, check the 48-point 4-pawl engagement against the intended riding category, and select the freehub standard that matches the drivetrain mix in the target market. Because the model already covers Shimano HG, Road Micro Spline, SRAM XDR and Campagnolo N3W and 11/12-speed options, a wheelset brand can plan several SKUs around one hub platform.
The sensible next step for a product manager or sourcing engineer is to request samples of the MT-037F/R in the required freehub configuration, build them into a test wheelset, and confirm spoke length, bearing feel, engagement behavior and rotor fit before committing to a production program. Customization details, including freehub selection and order requirements, are best confirmed directly with ARC, since MOQ, lead times and program-specific terms are not fixed by the product description.
Taken together, the MT-037F/R is a credible candidate for performance road disc wheelsets where a 24-hole straight-pull, Center Lock, thru-axle hub set with broad freehub coverage is the requirement. Its material mix and 48-point engagement give wheel builders concrete points to verify, and ARC's OEM/ODM background makes it a reasonable partner to include in the evaluation for a road disc wheel program.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China