Wheel builders approaching a new road disc program usually run into the same bottleneck: the frame and fork set an axle and brake standard, the drivetrain commits to a freehub body, and the rim dictates spoke count and lacing. The hub set has to satisfy all three at once, then repeat that fit across a production run without drifting from build to build. That is the practical lens for reading the ARC MT-037F/R Road Hub Set, which ARC lists as designed for modern road disc brake wheel builds.
The build problem: matching a road disc hub to a wheelset program
Modern road and all-road frames have largely consolidated around 12 mm thru-axles, Center Lock rotors, and drivetrain families that no longer share a single cassette interface. For a wheel builder, this means a hub set is only useful if its stated configuration can be locked to a specific frame, groupset, and rim before the first spoke is cut.
The usual friction points are predictable. A hub with a different axle spacing cannot be adapted cleanly; a freehub body that covers only one drivetrain family splits a single wheelset platform into two SKUs; and a spoke interface that does not match the builder's drilling or lacing plan forces either a rim change or a custom order. Builders evaluating a hub set are therefore comparing full configuration envelopes, not just weight or bearing quality.
The MT-037F/R answers this at the specification level: it pairs a 12×100 mm front and 12×142 mm rear thru-axle layout with Center Lock, 24H straight-pull lacing front and rear, and a freehub range that spans the major road drivetrain standards. For builders, that combination is the starting point for judging whether this ARC hub set can serve one wheelset line or several.
Engagement and structure: the one-piece ratchet and material choices
The mechanical core of the road disc hub set is its ratchet drive. ARC offers the MT-037F/R with either a 36T or 54T ratchet, built around what ARC describes as a patented one-piece ratchet architecture. The distinction matters at the build stage: a one-piece ratchet reduces the number of discrete engagement parts inside the freehub, which is the kind of structure builders look at when they are reasoning about drive consistency and long-term service rather than short-term bench feel.
Ratchet tooth count is the more familiar trade-off. A 36T ratchet gives coarser engagement steps, while a 54T ratchet gives finer steps; for road use, the finer option is typically associated with quicker pickup, while the coarser option is often chosen where builders prefer fewer engagement points. Which one suits a given wheelset depends on the rider profile and the builder's own engagement philosophy, so the meaningful point is that ARC treats both as orderable configurations of the same hub set rather than separate products.
Materials follow the same load-path logic. ARC specifies a precision-machined AL6061-T6 aluminum hub shell, combined with a high-strength AL7075 aluminum axle, freehub body, and end caps. In a disc road build, the hub shell carries spoke and brake loads, while the axle and freehub body sit in the drivetrain and clamping path; using a higher-strength 7075 alloy for those parts is a deliberate material split rather than a uniform choice. The stated total weight is approximately 376.3 g for the set.
Spoke, axle, and brake interface: what fits
The interface specification is where most builder questions are settled, and the MT-037F/R is explicit about it.
- Spoke configuration: 24H front and rear, straight-pull on both. ARC frames this as supporting efficient spoke integration and balanced wheel construction. For builders, straight-pull means the spoke runs directly from hub flange to rim without a J-bend, so the spoke specification, flange geometry, and tension plan must be set together with the rim choice rather than treated as separate line items.
- Axle spacing: 12×100 mm front, 12×142 mm rear thru-axle. This is the current road disc envelope; builders should confirm it against the specific frame and fork before committing.
- Brake interface: Center Lock, which fixes the rotor mounting method and, in practice, narrows the rotor selection to Center Lock-compatible parts.
- Bearings: steel or ceramic options, selected per build rather than fixed by the hub set.
Read together, the spoke, axle, and brake interfaces give a builder a defined starting envelope for a road disc wheelset. The variable that stays open is bearing choice, which lets a builder position the same hub set differently across price tiers or service expectations.
Freehub options for drivetrain coverage
Freehub compatibility is where a hub set either simplifies or complicates a wheelset program, and the MT-037F/R covers the main road drivetrain families. ARC lists compatibility with Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed freehub standards.
The practical value is that one hub platform can be carried across wheelsets intended for different drivetrains, rather than requiring a distinct hub model per groupset family. That has downstream effects a builder will recognize: a shorter hub SKU list, more straightforward specification when a wheelset brand sells the same rim to customers across drivetrain ecosystems, and easier adaptation when a buyer's groupset mix shifts between orders. Builders should still confirm the exact freehub body against the intended cassette and groupset generation, since compatibility is stated by standard and the cassette itself remains the final check.
Working with ARC as an OEM/ODM hub partner
For wheelset brands and OEM buyers, the hub set's configuration envelope is only half the evaluation; the other half is whether the supplier can deliver it consistently and adapt it to a program. Taicang Xiangyue Sports Equipment Co., Ltd., operating as ARC, is a professional bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China, specializing in the research, development, manufacturing, and customization of high-performance bicycle hubs. ARC provides OEM and ODM solutions for global bicycle brands, wheel manufacturers, and distributors across mountain bike, road, gravel, and e-bike categories.
Those stated capabilities map onto the practical questions a builder raises about a road disc hub set. ARC cites advanced CNC machining, precision manufacturing, professional engineering expertise, and strict quality control systems as the basis for its hub solutions—relevant when a hub set specified at 24H straight-pull and a specific axle and freehub combination must hold that configuration across production batches. The OEM and ODM scope is also where customization questions belong: builders sourcing under their own wheelset programs can raise bearing selection, ratchet choice, and freehub configuration as part of a program conversation rather than assembling them from a fixed catalog.
ARC MT-037F/R 24H Straight-Pull Center Lock Road Disc Hub Set is the product page for the configuration discussed here.
For a builder whose road disc program needs a thru-axle hub set with 24H straight-pull lacing, Center Lock, a choice of 36T or 54T ratchet, and freehub coverage across Shimano HG, Road Micro Spline, SRAM XDR, and Campagnolo N3W and 11/12-speed, the MT-037F/R is a sensible candidate to include in the supplier evaluation. The productive next step is to take the intended frame axle standard, groupset, rim drilling, and bearing tier and check them against the stated configuration—then use the OEM/ODM channel to confirm bearing and ratchet options and how the build will be held consistent across the order.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China