Wheel builders specifying a modern trail or all-mountain wheelset face two decisions before anything else: does the hub fit the frame and rotor standard, and which freehub body matches the drivetrain? The ARC MT-051F/R 28H Boost Center Lock MTB hub set answers both in a single, well-defined product — a straight-pull Boost hub pair with a 28-hole front and rear count, a Center Lock disc interface, and a choice of Shimano HG, Micro Spline or SRAM XD freehub bodies.
What the MT-051F/R Is Built For
The MT-051F/R is an MTB hub set rather than a single hub, supplied as a matched front and rear pair. Its design brief is modern Boost mountain bike wheel building: straight-pull spokes, an aluminum shell, and a disc interface that suits current rotor mounting practice. Because it is offered in a defined set of freehub and bearing configurations, it is relevant to buyers who need to specify one model across several drivetrain builds rather than source separate hubs for each cassette standard.
ARC, the Taicang-based hub manufacturer behind the model, produces hubs in-house and provides OEM and ODM development for bicycle brands, wheel manufacturers and distributors. That matters here in a practical way: when a wheel program needs a particular freehub or bearing specification, the question is whether the supplier can deliver that variant consistently — and the MT-051F/R is structured as a configurable model rather than a single fixed build.
Spacing, Drilling and Rotor Interface
The fit-critical numbers are straightforward. The front hub uses 15×110mm Boost spacing and the rear uses 12×148mm Boost spacing. Both are the current Boost standards for trail and all-mountain platforms, so the set aligns with frames and forks designed around Boost hub widths. Buyers working with older non-Boost frames or 100/142mm spacing should treat this hub set as out of scope rather than attempt adaptation.
Both front and rear are drilled at 28 holes. A 28H count is a common choice for trail and all-mountain wheels where builders balance weight against spoke redundancy; it is lighter than a 32H build but still gives a workable spoke pattern for disc-braked mountain use. The straight-pull spoke structure is part of the same design intent — it removes the J-bend at the hub flange and changes how the wheel is laced and tensioned, so wheel builders should confirm their spoke lengths and lacing plan against the actual flange geometry rather than assuming a J-bend equivalent.
The Center Lock interface governs rotor mounting. Center Lock uses a splined rotor mount secured with a lockring, which differs from six-bolt mounting in both hardware and installation sequence. Builders should verify that the intended rotors and lockrings are Center Lock compatible; six-bolt rotors will not mount to this hub without an adapter, and adapter stack height is worth checking against caliper clearance.
Choosing the Freehub: HG, Micro Spline or XD
The freehub choice is the decision most likely to cause rework if it is settled late. The MT-051F/R is available with three freehub standards:
- Shimano HG — the long-established splined standard used across a wide range of Shimano and third-party cassettes. It suits builds where the drivetrain spec calls for an HG-compatible cassette.
- Micro Spline — Shimano's newer, smaller-spline interface associated with its 12-speed mountain cassettes. Builders standardizing on that cassette family should specify this body.
- SRAM XD — SRAM's driver standard for its XD-compatible cassettes. Builds using SRAM's XD cassette range require this option.
These are not interchangeable after the fact without changing the freehub body, so the drivetrain specification should be locked before the hub order is placed. For a brand running several models on one hub platform, the useful approach is to map each bike's cassette standard to a freehub variant up front, then order the mix in one go. ARC's OEM and ODM role is relevant at exactly this point: a single hub model covering three freehub standards simplifies variant management compared with sourcing separate hubs per drivetrain.
Engagement, Materials and Bearings
Engagement is handled by a 6-pawl, single-tooth system with 72-point engagement. More points of engagement means a shorter rotation before the pawls pick up drive, which riders notice as faster response when they resume pedaling — for example after a brief pause on a technical climb. The 6-pawl layout spreads drive load across multiple pawls, and the single-tooth arrangement refers to how the pawls engage the drive ring. Builders should treat the 72-point figure as a specification of the ratchet geometry rather than a claim about durability or drag; those outcomes depend on the full system, including bearing condition, lubrication and riding conditions.
The shell is AL6061-T6 aluminum, while the axle, freehub body and end caps are made from high-strength AL7075 aluminum. That split is deliberate: the shell benefits from a material that machines and forms well at a reasonable weight, while the load-bearing and wear-prone parts use a higher-strength alloy. For buyers, this is a materials specification to record and compare against alternatives rather than a performance guarantee on its own.
Bearings are offered in steel or ceramic configurations. This is a genuine configuration choice within the same model, and the right answer depends on the build's price position, service expectations and intended use. Ceramic and steel bearings differ in cost and in the service regime buyers should plan for; the hub set's specification lists both as available options, so the selection should be stated explicitly on the purchase order rather than left open.
Weight and Configuration Notes Before Sampling
The quoted total weight of approximately 258.6g should be read as a total figure for the set as specified, not as a per-hub number and not as a fixed constant across every configuration. Bearing choice and freehub body are variant-dependent, so buyers comparing this figure against competing hubs should confirm what configuration it refers to.
Before requesting samples, it is worth settling a short list of configuration questions with ARC: front and rear spacing confirmed against the target frame and fork; 28H drilling confirmed against the rim's spoke count; Center Lock rotor and lockring compatibility confirmed; the freehub standard fixed per bike model (HG, Micro Spline or XD); bearing configuration (steel or ceramic) stated per variant; and spoke length and lacing confirmed against the straight-pull flange geometry.
The MT-051F/R is a sensible fit for wheel builders and product managers working on Boost trail and all-mountain platforms who want one hub set covering multiple drivetrain standards, with a materials and engagement specification that can be documented and compared. ARC's in-house manufacturing and OEM/ODM customization make it a reasonable candidate to include in a supplier evaluation when the requirement is a configurable Boost hub set rather than an off-the-shelf unit — and the natural next step is to confirm the variant matrix and request samples against those settled questions.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China