Boost Center Lock MTB Hub

ARC MT-051F/R 28H Boost Center Lock MTB Hub Set: What Buyers Get

16 min read
On this page 6 sections

For a wheel builder or brand product manager planning a modern trail or enduro wheelset, the component that most often delays a build decision is the hub. Frame and fork standards, rotor mounting, spoke drilling, freehub ecosystem and bearing specification all have to line up before a purchase order makes sense. The ARC MT-051F/R 28H Boost Center Lock MTB Hub Set answers that requirement with a defined and documented configuration, and Taicang-based hub manufacturer ARC positions it as a straight-pull Boost set for volume wheel programmes rather than a single bespoke build.

What the MT-051F/R Is Built For

The MT-051F/R is a Boost-spacing mountain bike hub set intended for modern MTB wheel builds. That framing matters before any specification is read: the front hub is drilled for 15×110mm and the rear for 12×148mm, which is the Boost standard now used across most current trail, all-mountain and enduro frames and forks. Choosing a Boost hub set at the outset avoids the axle adapters and mismatched dish that come from retrofitting non-Boost hardware into a Boost frame.

The set is configured as a matched front and rear pair with 28-hole drillings at both ends. A 28H count is a common choice for riders and brands balancing spoke count against rim weight and lateral stiffness, and it gives wheel builders a defined starting point for spoke length calculation and lacing patterns. Because the hub uses a straight-pull structure, spoke selection should follow straight-pull requirements rather than J-bend conventions, so the spoke specification should be confirmed at the same time as the hub order.

For brands consolidating a wheelset platform, this is the practical value of a documented hub set: the spacing, drilling and brake interface are fixed and known, so rim, spoke and frame choices can be made against them rather than discovered during sampling.

Stated Materials and Construction

ARC lists the MT-051F/R with AL6061-T6 aluminum hub shells and high-strength AL7075 aluminum for the axle, freehub body and end caps. These are distinct material choices worth noting because they place different demands on the part. AL6061-T6 is a widely used shell material appreciated for machinability and stable mechanical behaviour, while AL7075 is a higher-strength aluminum grade often selected where loads and wear are concentrated, such as the axle, freehub body and end caps.

The straight-pull structure is the other structural fact stated for this set. Straight-pull hubs route spokes directly from the flange without a J-bend, which changes how the spoke engages the hub and how wheel builders plan lacing and tension. Buyers should treat this as a build-defining feature rather than a cosmetic one, because it determines the spoke type, the lacing sequence and the tools used at the wheel-building stage.

ARC's background as a Taicang-based manufacturer working with CNC machining and quality control systems is relevant here only as context for how such a hub is produced. The material and structure statements above are the verifiable product facts; buyers should not infer additional coatings, treatments or testing regimes that are not documented for this set.

Engagement, Spacing and Brake Interface

The drivetrain and frame-fit specifications are where most sourcing questions concentrate. ARC specifies a 6-pawl, single-tooth engagement system quoted at 72 points of engagement. In practice, engagement point count describes how far the cranks can rotate before the pawls pick up drive; a higher count is generally associated with quicker pedal pickup, which riders notice on technical climbs and repeated short power inputs. The 6-pawl layout is the stated mechanism, and the 72-point figure is the quoted engagement specification, not a claim about durability or drag.

Spacing is fixed as 15×110mm front and 12×148mm rear, matching Boost frames and forks. Buyers should verify their frame and fork dropout standards, axle thread pitch and any required thru-axle hardware against these figures before committing, since Boost spacing is a family of standards and the axle details still need to match the frame.

The brake interface is Center Lock. This matters for rotor selection and for assembly time on the line: Center Lock rotors mount with a lockring rather than six bolts, so the rotor specification and lockring tooling should be confirmed alongside the hub order. Brands standardising on Center Lock across a range can use this hub set to keep rotor mounting consistent between models.

Freehub and Bearing Options

The MT-051F/R is available with Shimano HG, Micro Spline and SRAM XD freehub options. This is the configuration choice that most directly affects which drivetrains a wheelset can serve. HG remains widely used and is compatible with many 8- to 11-speed and some 12-speed systems; Micro Spline is associated with Shimano 12-speed mountain drivetrains; SRAM XD is used with SRAM's 12-speed mountain cassettes. Because one hub set can be ordered in any of these three standards, a wheel brand or distributor can serve several drivetrain ecosystems from a single hub platform instead of stocking separate hub models for each.

Bearings are offered in steel or ceramic configurations. The honest way to read this option is as a specification choice for the buyer to align with their target price point and service model, not as a performance guarantee. ARC's product data states the two bearing options; it does not publish comparative friction, longevity or service-interval figures for them, so those should be treated as items to confirm with the supplier if they are decisive for a given programme.

For buyers sourcing across multiple markets, the freehub and bearing matrix is also the point at which to lock down part numbers and labelling, so that distributors can order the correct configuration without ambiguity.

Weight and What to Confirm Before Ordering

ARC quotes a total weight of approximately 258.6g for the MT-051F/R set. As with any quoted weight, buyers should confirm whether the figure refers to the pair or to a single hub, and whether it includes end caps or other hardware, before using it in wheelset weight calculations. Weight is one input into a build decision, not a proxy for strength or ride quality.

Before placing an order, the practical checklist for this hub set is short but specific: confirm the front and rear axle standards and thru-axle thread details against the intended frame and fork; confirm the 28H drilling matches the chosen rims and that straight-pull spokes are specified; confirm the freehub standard and bearing configuration for each SKU; and confirm the Center Lock rotor and lockring specification. It is also worth asking ARC directly about MOQ, lead times and available documentation for the specific configuration, since these are commercial terms that vary by order and are not stated in the product data.

ARC's stated OEM and ODM capability is relevant to brands that need configuration flexibility across a range rather than a single catalog build. For a product manager or wheelset builder whose frame standards, rotor mounting and drivetrain ecosystem match the MT-051F/R's documented specification, this hub set is a sensible candidate to shortlist: the Boost spacing, 28H straight-pull structure, Center Lock interface, three freehub options and steel or ceramic bearing choice give a defined basis for a wheel programme, and the next step is to request the configuration and commercial details from ARC directly.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China