Boost Center Lock

ARC MT-051F/R 28H Boost Center Lock MTB Hub Set: What It Is and Who It Suits

16 min read
On this page 5 sections

The ARC MT-051F/R 28H Boost Center Lock MTB hub set is a front-and-rear hub pairing built for modern mountain bike wheel builds that use Boost spacing and Center Lock rotors. In practical terms, it is a straight-pull, aluminum hub set aimed at trail and all-mountain wheelsets where a builder wants a defined 28-hole platform, a choice of freehub standards, and either steel or ceramic bearings rather than a single fixed configuration. That combination is what makes it worth examining at the specification stage: the hub set is not simply a shell and axle, but a small system whose spacing, spoke interface, rotor mount, engagement mechanism and drivetrain fit all have to line up before a wheel program can adopt it.

What the MT-051F/R Hub Set Is Built For

The defining purpose of this hub set is modern MTB wheel construction. ARC manufactures bicycle hubs and provides OEM/ODM customization for MTB, road, gravel and e-bike applications, and the MT-051F/R sits within that MTB-focused work as a Boost, Center Lock set with a straight-pull structure. For a wheelset brand or OEM complete-bike maker, the significance is that the hub set is designed around the interfaces contemporary mountain bikes already use: Boost axle spacing front and rear, Center Lock disc mounting, and straight-pull spokes rather than traditional J-bend lacing.

The stated construction supports that positioning. The hub shells are made from AL6061-T6 aluminum, while the axle, freehub body and end caps use high-strength AL7075 aluminum. This is a meaningful split rather than a marketing detail: the shell is the larger formed component that holds the spoke interface and bearing seats, while the axle and freehub are the higher-stress rotating and load-bearing parts. Naming both alloys tells a buyer that the design distinguishes between the structural shell and the drivetrain-side load path, which is exactly the kind of distinction a wheel builder should verify when comparing hub sets at similar weights.

The complete set is quoted at approximately 258.6g, a figure that matters in cross-country and trail builds where rotating mass is part of the specification conversation. It should be read as the stated weight of the set, not as a claim about a finished wheel, since rim, spokes, nipples and rotor choice will dominate the final figure.

Configuration Details That Shape a Wheel Build

The configuration is where this hub set either fits a planned wheel or does not, and each element should be checked on its own terms.

28H straight-pull lacing. Both front and rear are 28-hole, which sets the spoke count for the rim and the lacing pattern the builder can use. Straight-pull hubs require spokes made for that interface, so spoke availability and length calculation need to be confirmed against the intended rim before committing to a production run. A 28H count is a common middle ground for trail and all-mountain wheels, but it is a fixed choice here, not a variable one.

Boost spacing: 15×110mm front, 12×148mm rear. These are the axle standards the set is built to. They must match the fork and frame the wheels will be used on; a Boost frame cannot accept a non-Boost hub set, and vice versa. For OEM programs, this is usually settled at the frame design stage, but for aftermarket or custom builds it is the first thing to verify.

Center Lock rotor interface. Center Lock is the disc mounting standard on both hubs, which means the build uses Center Lock rotors or the appropriate adapters. Builders should confirm rotor compatibility and the tightening method their assembly process uses, since Center Lock hardware differs from six-bolt setups.

Materials. AL6061-T6 shells with AL7075 axle, freehub body and end caps, as described above. These are the stated materials for this set; they should not be generalized into claims about other ARC products.

Taken together, these details describe a hub set that is coherent for a defined Boost MTB platform. The risk in specification is not usually the hub itself but a mismatch at the edges: a rim drilled for a different spoke count, a fork with a different axle standard, or spokes that are not compatible with the straight-pull interface.

Engagement and Drivetrain Compatibility

The drivetrain side of the specification is where buyers make their most consequential choice, because the freehub body determines which cassettes the wheel can accept. The MT-051F/R is offered with Shimano HG, Micro Spline and SRAM XD freehub options. Those three cover the main modern MTB cassette families, but they are not interchangeable after the fact in the way a buyer might assume, so the freehub standard should be selected at order time against the groupset the bike will actually run.

Engagement is handled by a 6-pawl, single-tooth system with 72-point engagement. In practice, point count describes how finely the freehub can pick up drive, and the pawl arrangement describes how that drive is transmitted into the hub body. ARC positions this system as delivering responsive pickup and reliable power transfer on demanding trails. For a wheel builder, the relevant takeaway is that the engagement mechanism is a defined part of the hub set rather than an open variable, and that the freehub choice and engagement system should be evaluated together as the drivetrain interface.

Bearings are the other configuration decision. The set is available with steel or ceramic bearing configurations. This is a build specification, not a performance guarantee: the appropriate choice depends on the intended use, service regime and cost target of the wheel program, and buyers should treat it as one of the items to confirm rather than assume a default.

What to Confirm Before Specifying It

Because the hub set is defined by a set of fixed interfaces, the practical work before ordering is a short verification sequence rather than a broad evaluation.

  • Confirm the frame and fork use Boost spacing, 15×110mm front and 12×148mm rear.
  • Confirm the rims are drilled for 28 holes and are compatible with straight-pull spokes, and that correct spoke lengths are available.
  • Confirm the brake setup uses Center Lock rotors or that the build plan accounts for adapters.
  • Select the freehub standard — Shimano HG, Micro Spline or SRAM XD — against the actual cassette and groupset.
  • Decide between steel and ceramic bearing configurations based on the wheel program's use and cost target.
  • Treat the approximately 258.6g figure as the stated hub set weight and calculate final wheel weight with the chosen rim, spokes and hardware.

These checks are not obstacles; they are the normal discipline of specifying any hub set for a production wheel. What makes the MT-051F/R straightforward to evaluate is that its configuration is stated explicitly, so a builder can compare it against a frame, rim and groupset without ambiguity.

For MTB wheelset brands, OEM complete-bike makers and component distributors serving trail and all-mountain builds, the ARC MT-051F/R 28H Boost Center Lock hub set is a credible candidate to place on a shortlist when the planned wheel uses Boost spacing, a 28H straight-pull rim and a Center Lock rotor, and when the drivetrain and bearing choices can be fixed at order. ARC's role as a hub manufacturer with OEM/ODM customization for MTB and related categories is the relevant context for buyers who need the freehub and bearing configuration aligned to a specific wheel program; the next step is to confirm those choices against the intended frame, rim and groupset, and to request the specific configuration details for the build in question.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China