MT-051F/R Boost Center

ARC MT-051F/R Boost Center Lock Hubs: What OEM Wheel Programs Get

16 min read
On this page 5 sections

For an OEM wheel program, the decisive question about a hub set is rarely “how does it look on paper?” It is whether each specification can be locked into a repeatable wheelset build without surprises at the spoke interface, the brake mount or the freehub. ARC’s MT-051F/R Boost Center Lock hub set answers that question in fairly concrete terms: a defined material split, straight-pull 28H drilling front and rear, Boost spacing, Center Lock, a choice of ratchet and bearing specifications, and three freehub standards. The purpose of this walkthrough is to show what each of those elements contributes to a production wheelset program, and where the remaining questions have to be settled directly with the manufacturer.

What an OEM Wheel Program Actually Needs to Confirm

Wheel program managers and component buyers typically evaluate a hub set against a short list of production-critical items. The first is the spoke interface, because straight-pull versus J-bend changes spoke selection, lacing patterns, tension targets and assembly tooling. The second is frame and brake compatibility: Boost spacing and the disc mounting standard determine which frames and rotors the finished wheelset can serve. The third is drivetrain compatibility, since freehub body choice dictates which cassettes the wheel accepts and how many SKUs a program must manage. The fourth is the internal mechanism, which affects engagement feel and service procedures. Finally comes the material and weight profile, which feeds into the wheelset’s positioning and marketing claims.

A hub set that is clear on all five points can be specified into a bill of materials with fewer assumptions. That is the framework used below to assess the ARC MT-051F/R set for trail and all-mountain Boost builds.

MT-051F/R Specification Breakdown for Boost Wheel Builds

The MT-051F/R pairs a lightweight AL6061-T6 aluminum hub shell with a high-strength AL7075 aluminum axle, freehub body and end caps. The material split is worth noting for program purposes: the shell carries the spoke and bearing interfaces in a material chosen for weight, while the load-bearing axle and the freehub body are specified in a higher-strength alloy. For a wheel builder, that distinction matters when writing the technical description of the finished wheelset and when setting expectations for trail and all-mountain use, which is the riding category ARC states for this set.

The spoke interface is straight-pull with 28-hole drilling on both front and rear. Straight-pull hubs simplify spoke replacement and are common in modern Boost builds; fixing the drilling at 28H front and rear gives the program a single, consistent spoke count to plan around rather than a matrix of drillings.

Spacing is 110mm front and 12×148mm rear, the Boost standard for contemporary mountain bikes, and the brake interface is Center Lock. Center Lock affects rotor choice and installation method, so it should be confirmed against the rotors the program intends to spec.

Inside the hub, the set uses a 36T or 54T ratchet system built on what ARC describes as a patented one-piece ratchet architecture, which the product data links to reliable engagement, efficient power transfer and structural rigidity. Two tooth counts mean a program can differentiate engagement feel between models, or standardize on one for simplicity.

Drivetrain compatibility covers Shimano HG, Micro Spline and SRAM XD, so a single hub platform can serve multiple cassette standards. Bearings are available in steel or ceramic, and ARC quotes a total weight of approximately 401.2g for the set. That figure should be treated as a quoted specification from the product data rather than a benchmark against other hubs; weight interacts with spoke count, rotor choice, rim selection and bearing specification, so it belongs in the wheelset’s own measured build sheet.

Where Customization Fits in an OEM/ODM Hub Program

Specification choices are only useful if they can be matched to a brand’s program. This is where the MT-051F/R connects to ARC’s operating model. ARC is a Taicang-based hub manufacturer founded in 2013 that provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, covering mountain bikes, road bikes, gravel bikes and e-bikes. The MT-051F/R sits squarely within the mountain bike portion of that portfolio, and its configurable elements, the 36T/54T ratchet option, the HG, Micro Spline and XD freehub bodies, and the steel or ceramic bearing choice, are the natural entry points for a program to define its own variant rather than accept a single fixed build.

For a wheelset brand, the practical value of an OEM/ODM relationship at this stage is that the hub specification can be aligned with the rest of the build before production planning, rather than after. A brand targeting a trail-oriented wheelset might specify the 36T ratchet with steel bearings and a Micro Spline body, while a program aiming at a different engagement character or bearing preference can select the alternative. Because these are stated options on the product, they can be discussed as configuration decisions with ARC’s engineering side; they should not be read as a commitment that any combination is available on any timeline, which is a point to confirm in program discussions.

ARC states that it supports partners through flexible customization and efficient production, backed by CNC machining, precision manufacturing, engineering expertise and quality control systems. For an OEM hub program, those capabilities are the relevant foundation for discussing how a customized MT-051F/R variant would be produced and controlled.

What to Verify Before Committing the Hub Set to Production

The product data settles the core specification questions, but several items that matter to a production program are not published and should be confirmed directly with ARC. These include sample availability and lead time for evaluation builds, the quality documentation and inspection approach that would accompany a production order, minimum order quantities and delivery terms, and whether specific combinations of ratchet tooth count, freehub standard and bearing type are available together.

A sensible evaluation path follows the build itself. First, confirm the frame and rotor compatibility implied by Boost spacing and Center Lock. Second, select the freehub standard and ratchet option that match the drivetrain and engagement targets of the wheelset. Third, build sample wheels to check spoke availability at 28H straight-pull, lacing and tension, and to verify the finished wheelset’s measured weight against the approximately 401.2g quoted for the hub set. Fourth, review the quality-control documentation and program terms before committing volume.

For OEM wheel program managers evaluating a Boost trail or all-mountain hub, the MT-051F/R is a well-defined candidate: the materials, drilling, spacing, brake interface, ratchet and freehub options are all stated, and ARC’s OEM/ODM background matches the way such a program needs to work. The next step is to bring the intended build configuration to ARC and request samples and program details, so the specification can be validated on the wheel rather than only on the specification sheet.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China