Boost MTB Hub

ARC MT-065F/R 32H Boost MTB Hub Set: Specs and Freehub Options

16 min read
On this page 6 sections

Wheel builders and product managers rarely get to specify a Boost mountain bike hub in isolation. The freehub body determines which cassettes and drivetrains the finished wheel can accept, and that decision usually comes before spoke count, rotor interface or ratchet feel are locked in. The ARC MT-065F/R 32H Boost MTB Hub Set is one of the configurations where those choices are presented together: a trail and all-mountain hub set with a published material spec, a 36T/54T ratchet option and three freehub standards. Reading those specifications in the order they affect a build is the most reliable way to decide whether this hub set belongs in a wheelset program or an OEM/ODM enquiry.

What the MT-065F/R 32H Boost Hub Set Is Built From

ARC separates the hub into two aluminum specifications rather than treating the whole body as one material. The hub shell is AL6061-T6, a heat-treated alloy commonly chosen for hub shells because it machines cleanly and holds flange geometry well. The axle, freehub body and end caps are listed as high-strength AL7075, an alloy selected where higher strength-to-weight is useful at the load-bearing and wear surfaces.

That split matters at the purchasing stage. The shell carries spoke loads and the brake interface; the freehub body carries cassette torque and ratchet engagement; the axle and end caps set the interface to the frame and fork. When a buyer asks for a material certificate or a dimensional drawing, these are the four part groups to request, and they should be confirmed as a set rather than assumed from the shell alone. ARC designs and manufactures this hub set as part of its hub development and OEM/ODM work for bicycle brands, wheel manufacturers and distributors, so specification questions can be raised against the actual part rather than a generic catalogue description.

36T or 54T: Reading the Ratchet Choice

The MT-065F/R is offered with either a 36T or a 54T ratchet, built on ARC's patented one-piece ratchet architecture. The published claim for this design is reliable engagement, efficient power transfer and enhanced structural rigidity — statements about the architecture, not measured engagement angles, torque figures or durability results. Those numbers are not published here and should not be inferred from the tooth count.

What the tooth count does tell a builder is directional. A 54T ratchet has more teeth than a 36T, which in ratchet systems generally means finer steps between engagement points; a 36T offers fewer, coarser steps. The practical consequence is a trade-off in feel and in how the mechanism is loaded, and the right choice depends on rider preference and the terrain the wheel is intended for. Because ARC lists both counts for the same hub set, the selection is a configuration decision made at order rather than a reason to choose a different hub. Buyers comparing the two should ask for the ratchet specification sheet and confirm that the requested count is stated on the order, since the two options share the same model designation.

Freehub Options: HG, Micro Spline and SRAM XD

This is the part of the specification that most directly constrains the build. The MT-065F/R is compatible with Shimano HG, Micro Spline and SRAM XD freehub standards, which covers the three main cassette interface families in current mountain bike drivetrains. Matching is straightforward in principle: the freehub standard must correspond to the cassette the wheel will carry, and the cassette must correspond to the drivetrain the frame is built around.

Three checks are worth making before ordering. First, confirm the exact cassette model rather than the groupset family, because interface standards do not map one-to-one onto every drivetrain tier. Second, confirm the freehub body specification in writing on the purchase order — with three standards available under one model name, an unspecified freehub is the most common source of a mismatched shipment. Third, if the wheel program covers more than one drivetrain brand, decide whether to stock multiple freehub bodies or standardize on one; the three-standard compatibility makes mixed fleets feasible, but only if the freehub is ordered as a line item.

For distributors and wheelset brands building a range, this flexibility is the practical argument for keeping the MT-065F/R in the evaluation set: one hub platform can serve Shimano HG, Micro Spline and SRAM XD builds without a second hub design entering the supply chain.

Fit Checks: Boost Spacing, 32H Drilling, J-Bend and 6-Bolt

The hub set uses 15×110mm front and 12×148mm rear Boost spacing. Both figures should be checked against the actual fork and frame, not against the model year alone, since Boost spacing is a frame standard that some frames approach differently at the rear. Confirming axle diameter and spacing together avoids the situation where the spacing is right but the axle standard is not.

Spoke drilling is listed at 28H, 32H and 36H, with the 32H version being the configuration in the product name. The hub uses J-bend spokes, so spoke selection and lacing should be planned around J-bend geometry rather than straight-pull. Braking is 6-bolt, which fixes the rotor standard and means the rotor mounts directly to the hub flange pattern. For a wheel builder, these four items — spacing, drilling, spoke type and rotor interface — define the rim, spoke and rotor choices that can be paired with the hub, and they are best confirmed as a group before rims are ordered. ARC's OEM/ODM scope covers mountain bike hubs alongside road, gravel and e-bike platforms, which is relevant if the same wheel program spans more than one category.

Bearings, Weight and OEM/ODM Ordering

The hub set uses S&S steel bearings and is published at approximately 453.1g for the set. The weight figure is a specification input for build planning and should be treated as such: it describes the hub set as listed and does not by itself predict wheelset weight, ride feel or bearing life. Bearing service life depends on load, contamination, maintenance and riding conditions, none of which a bearing brand name establishes.

For OEM and ODM orders, the productive approach is to specify the four variables this hub set actually exposes: ratchet count (36T or 54T), freehub standard (Shimano HG, Micro Spline or SRAM XD), spoke drilling (28H, 32H or 36H) and the Boost axle configuration. ARC provides OEM and ODM hub solutions for global bicycle brands, wheel manufacturers and distributors, which is the correct channel for custom requirements beyond the published configuration — but customization scope, tooling, minimum quantities and lead times are commercial terms that must be confirmed directly with ARC rather than assumed from the product page.

The specification reading points to a clear conclusion for trail and all-mountain programs. The MT-065F/R 32H Boost hub set is worth putting on the sampling list when a build needs a defined aluminum construction, a choice between 36T and 54T ratchet engagement, and the ability to serve Shimano HG, Micro Spline and SRAM XD drivetrains from one hub platform. Buyers should bring their cassette models, frame and fork spacing, rotor standard and intended spoke count to the enquiry, and ask ARC to confirm each against the ordered configuration — that is the point at which the published specifications become a purchasable wheel build.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China