For wheel builders serving the trail and all-mountain segment, hub specification is rarely a simple catalogue exercise. The hub set determines spoke selection and lacing options, brake rotor mounting, freehub choice and, critically, whether the finished wheel drops into the frame and fork the customer has already specified. The ARC MT-065F/R BOOST MTB Hub Set is designed for demanding trail and all-mountain wheel builds, so it makes sense to examine it against those build constraints rather than as a standalone component.
Where the MT-065F/R Fits in a Trail and All-Mountain Build
A trail or all-mountain wheelset brief typically arrives with several fixed requirements: a Boost frame and fork, a specific drivetrain, and a rotor standard the customer does not want to change. The hub set therefore needs to be assessed as an integration point between frame, drivetrain and rim, not as a performance claim in isolation.
ARC positions the MT-065F/R specifically around demanding trail and all-mountain wheel builds, which is a useful starting point for builders whose briefs sit in that category. The set is listed as a front-and-rear pair with Boost spacing, which means a wheel builder can evaluate it as a matched system rather than sourcing two separate hubs with potentially different specifications. For product managers assembling a complete wheelset range, this reduces the number of individual part numbers that need to be tracked and verified.
Materials and the One-Piece Ratchet: Reading the Specification
The hub shell uses AL6061-T6 aluminium, while the axle, freehub body and end caps are specified in high-strength AL7075 aluminium. This material split is worth noting in a build brief: the shell and the load-bearing internal parts are not treated as interchangeable, and the higher-strength alloy is assigned to the axle and freehub body where torque and load concentration are greater. Builders reviewing the specification should confirm this pairing against their own durability expectations for the intended use category.
The drive mechanism is offered as either a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture. The engagement option is a genuine specification choice for the buyer rather than a fixed feature, and the two-tooth-count options should be matched deliberately to the build brief. What the specification does not state is how either ratchet option behaves in terms of engagement angle, drag or long-term wear. Those are points to raise with ARC directly and to examine on a sample rather than assume from the tooth count.
Spoke Drilling, Brake Mount and Freehub Compatibility
For wheel builders, the spoke interface is often the first practical filter. The MT-065F/R uses J-bend spoke drilling, which keeps the build compatible with conventional J-bend spokes and the lacing patterns most builders already have tooling and experience for. Drilling is available in 28H, 32H and 36H configurations, giving enough spread to cover lighter trail builds and heavier-duty all-mountain assemblies without changing hub model.
The brake interface is a 6-bolt disc mount, so rotor selection follows the established six-bolt pattern rather than centre-lock. Builders should confirm this against the rotors already specified in the customer's bill of materials, since a mismatch here affects the finished wheel, not just the hub.
Freehub compatibility covers Shimano HG, Micro Spline and SRAM XD standards. That range allows the same hub set to be specified across drivetrain families, which is useful for a wheel brand or OEM maintaining several build tiers from a shared hub platform. As with any freehub option, the exact configuration ordered should be confirmed per build, and the freehub body material noted in the specification is AL7075 aluminium.
Boost Spacing, Weight and Sample Verification
The hub set is specified with 15×110mm front and 12×148mm rear Boost spacing, which aligns with current trail and all-mountain frame and fork standards. Builders should still verify the specific frame and fork interfaces in the brief, since Boost spacing is a family of standards rather than a single fitment.
The stated total weight is approximately 453.1g, and the bearings are specified as S&S steel bearings. Both figures are useful reference points during the specification review, but they should be treated as stated values to confirm rather than as verified outcomes. A sample review is the appropriate stage to check actual measured weight, bearing fit and feel, ratchet engagement behaviour, and freehub and end cap fitment as assembled. Recording these observations against the build brief gives the buyer a defensible basis for approving the hub set for a production wheelset.
Working With ARC on an OEM or ODM Hub Specification
ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., manufactures bicycle hubs and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors. That positioning fits a buyer who is not simply purchasing a catalogue hub but specifying one against a defined trail or all-mountain wheel build.
For a wheelset product manager or purchasing engineer, the practical next step is to take the MT-065F/R specification into a concrete build brief: ratchet option, spoke hole count, freehub standard, rotor interface and Boost fitment, all matched to the frame, drivetrain and rim already selected. From there, a sample request allows the stated weight, bearing specification and interface fitment to be checked before committing to a production order. The ARC MT-065F/R 32H Boost MTB Hub Set – 36T/54T Ratchet is the reference specification for that review, and ARC's OEM and ODM role makes it a sensible candidate to include when shortlisting hub suppliers for a trail or all-mountain wheel programme.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China