For product managers and wheel builders planning the next road disc wheelset, the critical question is rarely whether a hub looks good on paper. It is whether its spoke interface, engagement system, freehub range and axle spacing will hold a build together across multiple bike platforms without forcing compromises elsewhere. The ARC MT-075FA/RA 24H Straight-Pull 6-Bolt Road Disc Hub Set is ARC's answer to that question for modern road disc wheels, and its specification sheet is worth reading closely against those build requirements.
What the MT-075FA/RA Hub Set Delivers
The defining choice in this hub set is the straight-pull spoke design paired with a 6-bolt disc brake interface. Straight-pull lacing removes the J-bend from the spoke path, which simplifies spoke replacement and supports consistent tension during the build. For wheel builders managing a road disc program, that means a more predictable assembly process and a spoke interface that matches the direction many performance road wheels have already taken. The 6-bolt rotor mount, meanwhile, keeps the hub compatible with the broad base of 6-bolt rotors that workshops and distributors already stock, rather than locking the build into a single rotor standard.
Material selection follows a two-alloy approach. The hub shell is machined from AL6061-T6 aluminum, while the axle, freehub body and end caps use high-strength AL7075 aluminum. This combination is aimed at keeping the hub set light without treating the load-bearing and drivetrain-interface parts as an afterthought. The stated total weight is approximately 357.5g for the set, a figure that matters to brands positioning a disc road wheelset against weight-conscious competitors.
Engagement and Compatibility for Road Disc Builds
Drive engagement comes from a 6-pawl, single-tooth engagement system. In practical terms, this is the mechanism that determines how quickly the hub picks up when a rider applies power, and how consistently that power moves through the freehub. For road disc builds, where riders expect immediate response out of corners and during accelerations, the pawl count and engagement geometry are worth discussing directly with the manufacturer rather than assumed from a catalogue line.
Freehub compatibility is where this hub set earns much of its flexibility. ARC lists support for Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed freehub standards. That spread lets a brand or wheel manufacturer serve riders across the major drivetrain ecosystems without developing a separate hub platform for each. For distributors, it reduces the number of SKUs needed to cover a road disc range. The specification should still be confirmed against the exact groupset and cassette in each build, but the breadth of options is a genuine advantage when planning a multi-platform wheelset line.
Specifications That Matter for Wheel Builders
The 24H front and rear configuration is a deliberate middle ground. It supports balanced wheel building with a spoke count that suits road disc rims without pushing into heavier touring territory. Axle spacing is 12×100mm front and 12×142mm rear thru-axle, the current standard for road and gravel disc frames, so the hub set drops into the majority of modern road disc platforms without adapters.
Bearings are listed as S&S steel options. Steel bearings are a sensible baseline for road use, and the specific bearing choice is one of the details worth confirming during sampling, since bearing selection affects service intervals and rolling feel in ways a spec sheet alone cannot settle. Builders evaluating the ARC MT-075FA/RA 24H Straight-Pull 6-Bolt Road Disc Hub Set should treat the 357.5g figure, the 24H drilling and the thru-axle dimensions as a starting package, then verify bearing specification, spoke tension targets and rotor bolt torque against their own build protocol.
OEM and ODM Opportunities with ARC
The specification range above is only useful if it can be adapted to a brand's own requirements. This is where ARC's position as a hub manufacturer matters. Taicang Xiangyue Sports Equipment Co., Ltd., operating under the ARC brand, has focused on bicycle hub research, development, manufacturing and customization since 2013, and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors across mountain bike, road, gravel and e-bike categories.
For a road disc program, that means the MT-075FA/RA can serve as a starting point rather than a fixed catalogue item. Brands can discuss freehub configuration to match their drivetrain strategy, confirm bearing specification, and align spoke count and axle standards with their frame partners. ARC's CNC machining, precision manufacturing and quality control systems underpin that customization work, and the engineering team's involvement at the specification stage is where most of the practical value sits. ODM conversations typically begin with the intended application, target weight and drivetrain coverage, then move to sample verification before production volumes are discussed.
What ARC offers with the MT-075FA/RA is a road disc hub set built around straight-pull lacing, a 6-bolt rotor interface, a 6-pawl engagement system and a freehub range that covers Shimano, SRAM and Campagnolo standards, all at a stated 357.5g for the set. For brands and wheel builders whose next road disc wheelset needs broad drivetrain compatibility and a spoke interface suited to modern builds, this hub set is a reasonable candidate to add to the evaluation list. The next step is to confirm bearing specification, spoke tension targets and freehub configuration directly with ARC, and to request samples for build testing against your own rim and frame combinations.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China