ARC MT-075FA/RA Road

ARC MT-075FA/RA Road Hub Set: What OEM and ODM Wheel Programs Get

22 min read
On this page 6 sections

Product managers and sourcing engineers developing a 12×100/12×142 road disc wheelset usually start with the rim, the tire clearance and the intended riding category. The hub decision comes next, and it tends to lock in more of the program than expected: spoke type and count, rotor interface, axle standard, freehub body and bearing specification all flow from that one choice. The ARC MT-075FA/RA Road Hub Set is positioned for exactly this kind of modern road disc wheel build, so it is worth reading its published specification against the platform being planned rather than in isolation.

Start With the Wheel Platform, Not the Hub

A hub set is not a standalone purchase in an OEM or ODM wheel program. It is one component in a system where the rim's spoke drillings, the frame and fork dropout standards, the groupset and the rotor choice all impose constraints before the hub is selected. Reading a hub specification without that context invites expensive redesign later.

For a road disc program, the first fixed points are usually the axle standards and the rotor mount. The MT-075FA/RA is published with 12×100mm front and 12×142mm rear thru-axle spacing, which is the mainstream configuration for current road disc frames and forks. That gives the program a baseline to design around rather than a conversion problem to solve.

The second fixed point is the spoke interface. This hub set uses a straight-pull design with a 24-hole front and rear configuration. Straight-pull lacing changes how spoke length, bracing angle and tension balance are worked out, and 24H front and rear supports a balanced build without pushing hole counts into touring or gravel territory. For a brand building a road-focused wheelset, that is a coherent starting assumption, though the rim supplier's drilling pattern must confirm it.

The practical takeaway: evaluate the MT-075FA/RA against the wheel you intend to sell, and treat every published figure as a design input that must be reconciled with the rim, frame and drivetrain — not as a catalogue line to be matched loosely.

What the Published MT-075FA/RA Specification Covers

The specification answers several of the questions a wheel program will raise, and it is worth walking through them in the order they constrain a build.

Spoke interface and count. Straight-pull spokes, 24H front and rear. Straight-pull designs are common in performance road wheels because they avoid the J-bend at the flange; the trade-off is that spoke availability and lacing pattern need to be settled with the spoke supplier early.

Disc mount. A 6-bolt rotor interface. This matters because it determines which rotors the finished wheelset can carry and whether the brand's existing rotor specification carries over or needs revisiting.

Axle spacing. 12×100mm front, 12×142mm rear thru-axle — the road disc baseline noted above.

Material split. The hub shell is AL6061-T6 aluminum, while the axle, freehub body and end caps are made from high-strength AL7075 aluminum. The distinction is useful: the shell prioritises formability and weight, while the 7075 parts are chosen where strength and wear resistance matter more. A buyer should note which parts are which, because it affects how the hub is discussed in service and warranty terms.

Engagement. A 6-pawl, single-tooth engagement system, described as delivering responsive pickup and consistent power transfer. Pawl count and engagement geometry are the kind of detail that shapes rider feel and durability expectations; the published description sets the direction but not a quantified engagement angle.

Bearings. S&S steel bearing options are listed. The word "options" is significant — it signals a configuration choice rather than a single fixed build.

Weight. Approximately 357.5g for the set. That figure is useful as a program-level estimate, but it should be confirmed against the exact configuration ordered, since freehub body and bearing choices can shift the final number.

Freehub compatibility. Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed. This is the broadest part of the specification and the one most likely to drive program decisions.

Taken together, the published details describe a road disc hub set with a defined platform fit and a set of configurable interfaces. What the summary does not do is commit to a specific configuration for a specific customer — which is precisely where the OEM/ODM conversation begins.

Where Freehub and Bearing Options Affect Program Planning

Freehub body choice is often treated as a late-stage detail. In practice it is one of the earliest decisions a wheel program should lock, because it ties the wheelset to a drivetrain ecosystem and to the brand's SKU plan.

The MT-075FA/RA lists five freehub standards: Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed. For a brand selling into multiple markets, that range means one hub platform can serve several drivetrain audiences without a separate hub design. For a brand with a narrow, single-groupset lineup, it means the program can specify only the freehub it needs and keep the SKU set tight.

Either way, the decision has downstream effects: which cassettes the wheelset accepts, how the product is described to distributors, what spare freehub bodies need to be stocked, and how service documentation is written. A wheel brand that finalises freehub choice after the rim and spoke specification is set may find itself reworking SKU planning late in the process.

Bearing specification deserves similar early attention. The published material refers to S&S steel bearing options, which indicates a choice exists. The right question for a program is not simply "which bearing" but what the intended riding duty, service interval expectations and target price point imply for that choice. Those are commercial and technical judgments the buyer brings; the supplier's role is to confirm what is available and how it is specified.

How ARC's OEM/ODM Role Applies to This Hub Set

ARC, the brand of Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer based in Taicang, Jiangsu, China, founded in 2013 and focused on the research, development, manufacturing and customization of high-performance bicycle hubs. The company provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, covering road, mountain, gravel and e-bike categories. That positioning is directly relevant here, because the MT-075FA/RA belongs to the road category and is aimed at the same buyer types — brands and wheel manufacturers building a road disc wheelset.

The manufacturing context also matters for how a program is run. ARC describes advanced CNC machining, precision manufacturing, engineering expertise and quality control systems as part of its operation. For a hub set with a mixed-material construction — AL6061-T6 shell alongside AL7075 axle, freehub and end caps — machining consistency across those parts is a reasonable thing for a buyer to want to understand, and it is a legitimate topic to raise during supplier evaluation.

What this means concretely for an OEM or ODM discussion: the published MT-075FA/RA specification is the starting reference, and the customization conversation is about how the configurable elements — freehub standard, bearing option and the associated build details — are fixed for a given program. The ARC MT-075FA/RA 24H Straight-Pull 6-Bolt Road Disc Hub Set is the reference point for that discussion, and brands developing a road disc platform have a specific, published specification to bring to it rather than a generic capability claim.

It is worth being precise about what this does and does not establish. The company profile supports ARC's role as a hub manufacturer offering OEM and ODM work across several bicycle categories. It does not, on its own, establish minimum order quantities, lead times, certification status or program-specific performance outcomes for this hub set. Those belong in the direct conversation with ARC, not in assumptions drawn from a product summary.

Questions to Settle Before Sampling

Before committing a road disc wheel program to sampling, a sourcing engineer should convert the published specification into a list of confirmations. The point is not to doubt the specification but to close the gaps between a summary and a production order.

  • Configuration confirmation. Which freehub standard and which bearing option will be specified for this program, and how does the final weight compare with the published approximately 357.5g once those choices are fixed?
  • Spoke and rim interface. Which straight-pull spokes and lacing pattern are intended for the 24H front and rear layout, and has the rim supplier confirmed matching drillings?
  • Rotor and frame fit. Has the 6-bolt interface been checked against the intended rotor specification, and have 12×100mm front and 12×142mm rear been verified against the target frame and fork?
  • Engagement expectations. What does the 6-pawl, single-tooth engagement system mean in rider terms for the intended road use, and is there further detail available beyond the published description?
  • Material and service documentation. How are the AL6061-T6 shell and AL7075 axle, freehub and end caps described in service and warranty documentation?
  • Program terms. What are the OEM/ODM terms — order quantities, lead times, sampling process and quality documentation — for this specific hub set?
  • Customization boundary. Which elements of the hub set are genuinely open to customization within an OEM or ODM program, and which are fixed by the published design?

These questions are the practical bridge between a specification sheet and a supply agreement. They also give the buyer a clear basis for judging whether ARC's answers fit the program's technical and commercial constraints.

For brands and wheel manufacturers building a 12×100/12×142 road disc wheelset, the MT-075FA/RA offers a defined platform fit, a broad freehub range and a material specification that is specific enough to evaluate seriously. ARC's stated OEM and ODM focus on hub development and manufacturing for brands, wheel manufacturers and distributors makes it a relevant candidate to include in supplier evaluation for this category. The sensible next step is to bring the platform requirements — rim, drivetrain, rotor and target positioning — to ARC and confirm the configuration and program terms against them, so the hub set is specified for the wheel the brand actually intends to sell.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China