Center Lock Road Hub

ARC MT-081F/R 21H Center Lock Road Hub Set: Specs and Custom Build Options

15 min read
On this page 5 sections

For product managers and purchasing engineers assembling a road disc carbon wheelset program, the first question is rarely about the hub alone. It is whether the hub's spoke interface, axle standard, and customization range will fit the wheels the brand intends to sell—and whether the supplier can hold those specifications consistently from sample to production. The ARC MT-081F/R 21H Center Lock road hub set is designed around exactly that kind of build: a dedicated carbon-spoke road disc hub with a defined set of configuration choices rather than a single fixed specification.

Key specifications of the MT-081F/R

The MT-081F/R is built specifically for high-performance road disc carbon wheel builds, and its core numbers are worth reading together rather than in isolation.

The spoke configuration is 21H asymmetric with a dedicated round-head carbon-spoke interface. That interface is designed for VONOA B-type and C-type round-head carbon spokes, which matters because carbon spokes are not interchangeable across hub designs—the spoke hole geometry, head seating, and lacing pattern all need to match the spoke system the wheel builder intends to use. An asymmetric 21-hole layout is a specific choice tied to carbon-spoke road wheels rather than a general-purpose drilling.

The drive system uses a 36T or 54T ratchet with ARC's patented one-piece ratchet architecture. The two tooth counts represent different engagement characters, and the one-piece construction is intended to support consistent engagement, efficient torque transfer, and improved load distribution under demanding riding conditions.

Materials are split by function. The hub shell is forged AL6061-T6 aluminum; the axles, freehub body, and end caps are AL7075 for high strength at low weight. The axle and brake standards are 12×100mm front and 12×142mm rear thru-axle with a Center Lock disc interface. The set weighs approximately 390.9g.

For procurement documentation, these are the figures to carry into a specification sheet. What the numbers do not tell you on their own—engagement feel, bearing life, real-world durability—should be treated as validation items for sample testing rather than assumed from the datasheet.

Custom build options and compatibility

The customization range on the MT-081F/R is concentrated in three areas that directly affect how a wheelset is specified and stocked.

Freehub compatibility covers HG, Road Micro Spline, SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed. For a distributor or OEM serving multiple drivetrain ecosystems, this is the single most useful variable: one hub platform can be configured across the freehub standards that different customer groups expect, rather than requiring a separate hub model per drivetrain.

Bearing options are S&S steel, ENDURO, and CeramicSpeed. These sit at different points on the cost–performance curve, and the right choice depends on the price tier and intended use of the finished wheelset rather than on any single "best" option. A volume-oriented build and a premium build can share the same hub architecture while differing at the bearing line.

Spoke interface is fixed to the round-head carbon-spoke design for VONOA B-type and C-type spokes. This is not a variable to customize away—it defines which spoke systems the hub is compatible with, and wheel builders should confirm their spoke supply against this before committing.

The practical takeaway for a product manager is that the MT-081F/R is a platform with defined configuration points, not a bespoke-from-scratch hub. Freehub and bearing selection, plus the 36T/54T ratchet choice, are the levers available within the standard product. Anything beyond that—custom drilling, alternate finishes, or new interfaces—falls into OEM/ODM discussion with ARC rather than standard catalog configuration.

Integration with road disc wheel systems

The 12×100mm front and 12×142mm rear thru-axle configuration, together with the Center Lock disc brake interface, is what makes this hub suitable for modern road disc wheel systems. These are the current mainstream standards for road disc frames and forks, so the hub drops into contemporary build platforms without adapters.

Center Lock is worth a specific note for wheel builders: it is a rotor-mounting standard, and the choice affects how rotors are specified and stocked alongside the wheelset. Builders assembling complete wheels for OEM customers should align rotor specification with the Center Lock interface from the start rather than treating it as an afterthought.

The carbon-spoke focus and the 21H asymmetric layout also set expectations for the finished wheel. This is a specialized carbon-spoke road application, and the hub's design assumptions—spoke type, hole count, lacing—should be matched to the rim and spoke system the wheel is built around. A hub that is well matched to its intended rim and spoke combination is a different proposition from one pressed into a build it was not designed for, and the MT-081F/R is explicit about the builds it targets.

For buyers evaluating this hub, the sensible validation sequence is: confirm frame and fork standards match 12×100/12×142 thru-axle; confirm the intended spoke system is VONOA B-type or C-type round-head carbon; select freehub and bearing configuration against the target drivetrain and price tier; then move to sample build and ride validation before production commitment. Each of those steps is a factual checkpoint, not a performance claim.

OEM/ODM collaboration with ARC

ARC, operating as Taicang Xiangyue Sports Equipment Co., Ltd., was founded in 2013 and is based in Taicang, Jiangsu, China, specializing in the research, development, manufacturing, and customization of high-performance bicycle hubs. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers, and distributors across mountain bikes, road bikes, gravel bikes, and e-bikes.

For a road disc carbon wheelset program, that positioning is directly relevant: the MT-081F/R is a road-specific hub within a broader hub manufacturing operation, and the customization conversation can extend beyond the standard freehub and bearing options into OEM/ODM scope. ARC's stated capabilities include CNC machining, precision manufacturing, engineering expertise, and quality control systems—the areas that determine whether a hub specification holds from sample through volume production.

The appropriate next step for a product manager or purchasing engineer is to bring a defined build requirement to ARC: intended rim and spoke system, target drivetrain and freehub standard, bearing tier, expected volumes, and validation expectations. That gives the sample and specification discussion a factual basis, and it lets ARC respond within its actual product and customization scope rather than around generic claims. For teams building a carbon-spoke road disc wheelset, the MT-081F/R is a hub set worth placing on the evaluation list—specifically because its configuration points are defined, documented, and matched to a clear application.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China