For a weight-conscious trail or all-mountain wheelset, the hub set is one of the first decisions a builder has to get right. It sits at the center of the wheel, it sets the spoke geometry, the axle interface and the drivetrain standard, and it is one of the few components where saving grams does not have to come at the expense of engagement quality. The ARC MT-084F/R Boost hub set is designed around exactly that trade-off: a lightweight, performance-oriented MTB hub platform that combines a forged aluminum shell, high-strength aluminum axles and a one-piece ratchet drive. For brands and wheelset builders working on modern trail wheels, it is a specification worth putting on the shortlist early.
Why Weight-Focused Builders Start With the Hub Set
When the target is a light wheelset, every gram saved at the rim has a larger effect on ride feel than a gram saved at the hub, but hub mass still matters. Rotating mass at the hub is closer to the axle, and more importantly, the hub's material choices and wall thickness set how much material the rest of the wheel has to compensate for. A hub that is light but flexible forces the builder to add spoke tension or a heavier rim to restore stiffness, which cancels the original weight target.
Because of this, the useful question is not simply how many grams a hub set weighs, but whether its construction supports a coherent light build. The MT-084F/R weighs in at approximately 361.1g per set, which places it in lightweight territory for a Boost thru-axle MTB hub set with a ratchet drive. The more relevant point for specifiers is that this figure comes from a defined material plan rather than a stripped-down design. ARC, a hub manufacturer based in Taicang and founded in 2013, developed the MT-084F/R Boost specifically for lightweight, performance-oriented MTB wheel builds, which means the weight target and the structural choices were considered together.
For a wheelset brand or complete-bike OEM, that distinction matters during specification review. A hub set positioned around lightweight trail and all-mountain riding gives the product team a starting point it can match to a rim profile, spoke count and intended rider weight, rather than treating the hub as a generic part.
Materials and the One-Piece Ratchet Drive
The foundation of the MT-084F/R is a forged AL6061-T6 aluminum hub shell paired with high-strength AL7075 for the axles, freehub body and end caps. This is a deliberate split: the shell is forged for a balance of low weight and stiffness, while the AL7075 parts handle the higher localized loads at the axle and freehub interface. For builders, that material combination is a useful reference point when comparing the hub set against alternatives that use different aluminum grades or mix materials less deliberately.
The drive side is where the hub set's character is most clearly defined. Its patented one-piece ratchet architecture is available in 36T and 54T configurations. ARC describes these as providing consistent engagement, efficient torque transfer and improved load distribution. In practice, the tooth count choice is one of the more consequential specification decisions a product manager makes. A 36T ratchet offers a moderate engagement increment and is often favored where pedaling feel and lower drag are priorities; a 54T ratchet shortens the engagement angle, which suits technical climbing and riders who want quicker pickup. Because both options share the same one-piece ratchet design, the choice between them is about ride character rather than a different drive architecture.
The one-piece construction is also relevant to how torque is distributed through the mechanism. Compared with designs that spread load across multiple smaller engagement elements, a single ratchet ring gives the drive a defined load path, which ARC states as an advantage for load distribution. For OEM teams validating a hub for trail and all-mountain use, that is the kind of architectural detail that belongs in the specification conversation alongside tooth count.
28H Straight-Pull Lacing and Boost Platform Fit
Spoke count and lacing style decide how the hub connects to the rim, so they are central to any lightweight build. The MT-084F/R uses 28H front and rear drilling with a straight-pull design. Straight-pull spokes avoid the J-bend at the hub flange, which removes a common stress concentration and, in ARC's description, helps optimize spoke alignment and wheel stiffness. A 28H count is a practical middle ground for trail and all-mountain wheels: it is light enough to support a weight-focused build, and it leaves enough spoke material to maintain stiffness and durability under aggressive riding when paired with an appropriate rim.
The platform fit is equally important for frame and drivetrain compatibility. The hub set is built around Boost spacing with 15×110mm front and 12×148mm rear thru-axle interfaces, which is the current standard for most modern trail and all-mountain frames and forks. The Center Lock disc brake interface keeps rotor mounting consistent with common brake systems and simplifies assembly for wheel builders. On the drivetrain side, the hub set supports Shimano HG, Micro Spline and SRAM XD freehub standards, so a single hub platform can serve multiple complete-bike specifications without a redesign. That flexibility is significant for OEM and ODM programs, where one hub set may need to cover several drivetrain tiers across a model range.
Bearing Options, Listed Weight and What to Confirm
The final specification layer is the bearing choice. The MT-084F/R is offered with S&S steel or ceramic bearing options, which gives product teams a way to position the same hub set at different price and performance tiers. Steel bearings are the conventional choice for durability and predictable service; ceramic bearings are typically specified where lower rolling resistance is a selling point. Either way, the bearing selection should be matched to the intended riding category and the service expectations of the end customer, not treated as a purely cosmetic upgrade.
The listed weight of approximately 361.1g per set is the figure to use when building the weight budget for a wheelset, but it should be treated as a specification reference rather than a guarantee of the finished wheel weight. Spokes, nipples, rim, tape and rotor all add to the total, and the final figure depends on the complete build. Buyers comparing hub sets should confirm how the weight is measured and which configuration — bearing type, ratchet tooth count, freehub standard — the figure refers to, because these choices can affect the specification.
ARC's role as an OEM and ODM hub manufacturer is relevant here. The company develops and manufactures performance hubs for bicycle brands, wheel manufacturers and distributors, with CNC machining, precision manufacturing and quality control supporting custom programs. For a product team evaluating the MT-084F/R, that means the specification conversation can extend beyond the catalog configuration toward the exact freehub standard, bearing option and ratchet tooth count required for a given model. Buyers should confirm the specific configuration, the associated weight and the validation requirements for their intended use before committing to a production order, and should request the detail they need to compare the hub set against their existing specification.
Taken together, the MT-084F/R Boost hub set offers a coherent package for lightweight MTB wheel builds: a forged AL6061-T6 shell with AL7075 load-bearing parts, a patented one-piece ratchet in 36T or 54T, 28H straight-pull lacing, Boost thru-axle spacing, Center Lock and multi-standard freehub support, with steel or ceramic bearings and a listed set weight of approximately 361.1g. For brands and wheelset builders specifying a lightweight trail or all-mountain wheel, the ARC MT-084F/R is a hub set that merits a place in the evaluation and a direct specification discussion with the manufacturer.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China