The ARC MT-098F/R 28H Boost Center Lock e-MTB Hub Set is a straight-pull hub pair aimed at electric mountain bike and demanding off-road wheel builds. Its core offer is straightforward: Boost axle spacing front and rear, 28-hole drilling, Center Lock rotor mounting, a choice of three freehub standards, and a 4-pawl engagement system inside a mixed aluminium construction that keeps the pair at roughly 408.6g. For product engineers and wheelset builders, the practical question is not whether those numbers exist on a spec sheet but whether they line up with a given frame, fork, drivetrain and spoke plan. ARC builds this set specifically for e-MTB duty and supplies it through OEM and ODM programmes for bicycle brands, wheel manufacturers and distributors, so the fit discussion below is framed around real build decisions rather than general hub theory.
What the MT-098F/R hub set is built for
The MT-098F/R is positioned for electric mountain bikes and off-road wheelsets where the motor adds torque and sustained load to the drivetrain and hub interface. That context shapes the design: a straight-pull spoke structure, a Center Lock disc interface, and a shell and axle assembly built from two grades of aluminium rather than a single generic alloy. The set covers both wheels — front and rear — with matched 28-hole drilling, which matters when a builder wants a symmetrical spoke count and a single spoke length strategy across the pair.
Because it is an e-MTB hub set, it should be evaluated against the loads that class of bike actually produces: repeated torque spikes through the freehub, braking forces at the rotor mount, and the lateral stiffness demands of wider Boost frames. The specifications below are the ones that determine whether the set belongs in a particular build.
Boost spacing, drilling and spoke structure
The front hub uses 15×110mm Boost spacing and the rear uses 12×148mm Boost spacing. These are the current mainstream e-MTB standards, so the set is intended for frames and forks designed around Boost rather than older 100mm/142mm platforms. A builder should confirm both numbers against the frame dropouts and fork lowers before anything else, since spacing is not adaptable and a mismatch ends the evaluation immediately.
Both hubs are drilled at 28 holes. That count suits modern trail and e-MTB rims where a 28H build balances weight against the spoke redundancy needed for motor-assisted loads. The straight-pull configuration means spokes are not J-bend; the hub flanges are shaped for straight-pull lacing, which typically simplifies tension consistency during the build and avoids the bend fatigue associated with J-bend elbows. Builders should plan lacing patterns and spoke lengths around the straight-pull flange geometry rather than carrying over a J-bend spoke calculation.
Brake mount and freehub options
The Center Lock disc interface is a meaningful specification for e-MTB builds because it uses a splined, single-lockring mounting rather than six bolts. That generally speeds rotor changes and gives a consistent seating surface, and it means the rotor choice must be a Center Lock model or a six-bolt rotor paired with an adapter. Builders specifying this hub should settle the rotor standard early, since it affects both the hub order and the wheel's serviceability plan.
On the drivetrain side, the set is offered with Shimano HG, Micro Spline and SRAM XD freehub bodies. That covers the common e-MTB drivetrain families: HG for many 11-speed and some 12-speed systems, Micro Spline for Shimano 12-speed, and XD for SRAM 12-speed cassettes. The freehub choice is the single most consequential option at ordering, because it fixes which cassette family the wheel can accept and cannot be swapped without changing the freehub body. Distributors stocking the set for multiple brands should therefore treat freehub standard as a variant to specify, not an afterthought.
Engagement, materials and weight in e-MTB use
Engagement is handled by a 4-pawl, single-tooth system with 48 points of engagement. In practice, more engagement points reduce the crank rotation before drive engages, which is noticeable on technical climbs and when re-applying power after a pause — situations common on e-MTB trails. The 4-pawl layout distributes drive load across multiple pawls, and the single-tooth engagement pattern is intended for consistent pickup. These are design descriptions rather than measured performance claims; actual durability depends on maintenance, load history and riding conditions, so buyers should treat engagement feel and long-term wear as things to verify through their own testing.
The construction separates materials by function. The hub shells are AL6061-T6, a common choice for machined shell bodies where dimensional stability and machinability matter. The axle, freehub body and end caps use AL7075, a higher-strength aluminium grade suited to the loaded, wear-prone parts of the assembly. Steel bearings are offered as an S&S option, giving builders a choice at the bearing position. The complete set is stated at approximately 408.6g, which is a useful figure when comparing against other Boost e-MTB hub pairs during a weight budget exercise — though total wheelset weight will also depend on rims, spokes and nipples.
ARC's manufacturing background supports this kind of specification-led product: the company runs CNC machining, precision manufacturing and quality control systems, and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors. For a buyer weighing the MT-098F/R against alternatives, that combination of a defined e-MTB hub set and customisation capability is the relevant part of the offer — it means freehub and specification choices can be discussed as part of an OEM conversation rather than treated as fixed catalogue items. The ARC MT-098F/R 28H Boost Center Lock e-MTB Hub Set detail page is the reference point for the exact configuration being ordered.
Matching the hub set to a wheel build
Turning these specifications into a go/no-go decision comes down to a short sequence of checks. Each one can eliminate the hub set before any sample is requested, so working through them in order saves time.
- Frame and fork spacing: confirm 15×110mm front and 12×148mm rear Boost dropouts. Non-Boost frames are out of scope.
- Rotor standard: confirm Center Lock rotors, or plan an adapter if the build uses six-bolt rotors.
- Drivetrain family: select Shimano HG, Micro Spline or SRAM XD at order; this fixes the cassette compatibility.
- Rim drilling and spoke type: the rim must be 28H and the spoke plan must be straight-pull, with lengths calculated from the hub flange geometry.
- Load expectations: match the build to e-MTB use, and confirm bearing preference (including the S&S steel option) against the intended riding environment.
- Weight budget: account for the approximately 408.6g hub pair within the total wheelset target.
Builders who clear these checks have a hub set that fits a defined e-MTB platform with a known freehub and rotor interface. Those who cannot clear spacing or drilling should look elsewhere rather than adapt.
For e-MTB brands, wheelset builders and component distributors working within Boost, 28H and Center Lock constraints, the ARC MT-098F/R is a hub set worth placing on the evaluation list. Its value lies in the combination rather than any single figure: matched front and rear Boost hubs, straight-pull 28H drilling, three freehub standards covering the main e-MTB drivetrains, 48-point 4-pawl engagement, and a materials split that puts AL7075 where the load is. Buyers with a specific frame, rotor and cassette combination in mind can take those requirements to ARC directly, confirm the freehub variant and bearing option, and request samples or OEM/ODM details against their own build specification.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China