For wheel builders and bike brands developing a road disc carbon wheelset, the hubset is rarely a passive component choice. It sets the spoke interface, defines the axle and brake standards the wheel must meet, constrains freehub selection, and contributes directly to system weight and stiffness. The ARC MT-116F/R is a hubset built specifically around those constraints for road disc carbon wheel programs, and it is worth evaluating at the platform stage rather than after the rim and spoke specification is already fixed.
Why the Hubset Defines a Road Disc Carbon Wheel Program
A carbon-spoke road disc wheel is a system in which the hub, spokes, and rim influence one another. The hub's spoke holes determine which spokes can be used and at what angle they leave the flange. Its axle standard determines frame compatibility. Its brake interface determines rotor mounting. Its freehub determines drivetrain support. Decisions made at the hub level propagate through the rest of the build.
The MT-116F/R is engineered for ultra-lightweight road disc carbon wheel builds, combining a precision-forged AL6061-T6 aluminum hub shell with high-strength AL7075 axles, freehub body, and end caps. That material pairing is the foundation of the platform: a forged aluminum shell for the structural body, with 7075 aluminum used for the load-bearing axle and freehub components. For a wheel program, the practical consequence is that the hubset is light enough to support weight targets while retaining the stiffness and durability requirements of a disc-brake road wheel.
For product managers and purchasing teams, the hubset is where specification lock-in happens earliest. Frame and groupset compatibility, spoke sourcing, and bearing serviceability all trace back to hub choices. ARC manufactures this hubset as a defined platform with configurable options, which means a wheel brand can start from a known baseline and adjust specific parameters rather than commissioning everything from scratch.
Carbon-Spoke Interface and Layout Options
The most distinctive element of the MT-116F/R is its carbon-spoke interface. The dedicated T-head spoke holes accommodate compatible 3.3mm and 5.2mm wide carbon spokes, offering greater flexibility for custom carbon wheel systems. Two spoke widths cover the common range of carbon spoke products on the market, so builders working with different spoke suppliers can often use the same hub platform.
The hubset's versatile carbon-spoke interface supports both 1:1 and 2:1 spoke configurations, allowing wheel builders to select different layouts according to spoke tension, wheel stiffness, and design requirements. This is a meaningful choice rather than a cosmetic one. A 1:1 layout distributes drive and non-drive spokes evenly and tends to suit builds where balanced tension across the wheel is the priority. A 2:1 layout increases the number of spokes on the drive side, which is often used where torque transfer and drive-side stiffness are the dominant design goals. Which layout fits depends on the rim's drilling, the intended rider load, and the stiffness target the wheel brand has set.
Because layout and spoke width interact with rim geometry and tension targets, the hubset should be matched to the rim and spoke specification early. Builders evaluating the MT-116F/R for a carbon-spoke program should confirm that their chosen spoke model uses a compatible T-head and falls within the 3.3mm or 5.2mm width range before committing to a drilling pattern.
Axle, Brake, and Drivetrain Compatibility
The MT-116F/R is designed with a Center Lock disc brake interface and 12×100mm front / 12×142mm rear thru-axle spacing. These are the established road disc standards, so the hubset aligns with the majority of current road disc frames and forks without adapters. Center Lock rotor mounting is a practical choice for wheel programs as well, since it simplifies rotor installation and removal during assembly and service.
On the drivetrain side, the hub supports Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W, and Campagnolo 11/12-speed freehub standards. Covering all five gives a wheel brand the ability to offer the same rim and spoke build across multiple groupset ecosystems without redesigning the hub. For distributors, that breadth reduces the number of distinct hub SKUs needed to serve a mixed customer base.
Freehub selection should be fixed before sampling, since the freehub body is part of the hubset's construction and different standards correspond to different cassette interfaces. Brands planning to offer the wheelset across several groupset options should confirm with ARC which freehub configurations they intend to stock and how that maps to the hubset's build options.
Ratchet, Bearings, and Weight: Configuration Choices
Inside the hub, ARC's patented one-piece ratchet architecture is available in 36T and 54T options, providing consistent engagement, efficient torque transfer, and reliable load distribution. The tooth count shapes engagement feel: a 36T ratchet gives a coarser engagement point, while 54T provides finer engagement. For road use, the choice is often a matter of rider preference and the engagement characteristics the wheel brand wants to market, and both options share the same one-piece ratchet construction.
Bearing selection is the other internal decision. S&S steel, ENDURO, and CeramicSpeed bearing options are available, giving wheel programs a way to position the same hub platform at different tiers or to match a bearing specification to a particular customer requirement. Bearing choice affects the service and replacement story a brand tells its dealers, so it is worth deciding alongside the ratchet option rather than afterward.
With a complete hub set weight of approximately 281.1g, the MT-116F/R leaves meaningful headroom for a carbon rim and carbon spokes within typical lightweight road disc build targets. Weight should be treated as one input among several: spoke count, spoke width, rim depth, and ratchet and bearing choices all influence the final wheelset, and the hubset weight alone does not determine ride characteristics.
Working with ARC on an OEM/ODM Hub Program
ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China, specializing in the research, development, manufacturing, and customization of high-performance bicycle hubs. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers, and distributors, covering mountain bikes, road bikes, gravel bikes, and e-bikes.
For a road disc carbon wheel program, that OEM/ODM framing matters because the MT-116F/R is a configurable platform rather than a single fixed SKU. Before sampling, a wheel brand should confirm four things with ARC: the specific carbon spoke model and width the build will use, whether a 1:1 or 2:1 layout matches the rim drilling and stiffness target, which freehub standards the program needs to support, and which ratchet tooth count and bearing option fit the intended product tier. Sample validation should then test the assembled wheel against the program's own tension, stiffness, and durability criteria.
ARC's CNC machining, precision manufacturing, and quality control systems support this kind of program-based engagement, and the company's customization scope should be discussed directly with its team so that expectations are set against confirmed capabilities rather than assumptions.
For wheel builders and bike brands developing a road disc carbon wheelset, the MT-116F/R is a hubset worth placing on the evaluation list. Its carbon-spoke interface covers two common spoke widths and both 1:1 and 2:1 layouts, its axle, brake, and freehub standards align with current road disc platforms, and its ratchet and bearing options give room to differentiate a product line. The next step is to confirm spoke compatibility and freehub requirements with ARC and request samples for validation against the specific wheel program.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China