The ARC RT-035F/R Road Hub Set is a rim-brake road hubset built around a straightforward proposition: give lightweight rim-brake wheelset programs a hub foundation with a defined spoke layout, mixed aluminum construction and modern freehub options, without pushing the build toward disc-brake hardware. For product and purchasing managers at wheelset brands, bicycle OEMs and component distributors, the useful question is not whether the hubset is light in the abstract, but whether its stated specifications line up with the wheelset brief, the frame standard and the drivetrain mix the program actually sells.
Why Rim-Brake Road Builds Still Need a Deliberate Hub Choice
Rim-brake road wheelsets remain a distinct product category, and their hub requirements do not simply mirror disc-brake hubs. The frame interface is the first constraint: a rim-brake road frame takes 100mm front and 130mm rear spacing, so a hubset intended for this segment must be specified around those dimensions rather than around thru-axle disc standards. Getting this wrong at the specification stage creates problems that no amount of rim or spoke tuning can fix.
The second constraint is the lightweight brief itself. When a wheelset is positioned as light, every component carries weight scrutiny, and the hubset sits at the center of that calculation. A hub that is light but poorly matched to the spoke count or lacing pattern can force compromises elsewhere, particularly in spoke tension balance between the left and right sides of the wheel. Buyers specifying a lightweight rim-brake build therefore tend to look for a hubset that states its spoke drilling, lacing logic and material choices clearly enough to predict how the finished wheel will behave.
Engagement and freehub standard are the third consideration. Road drivetrains increasingly span Shimano HG and SRAM XDR freehub bodies, and a hubset offered in both standards lets a wheelset brand serve more of its dealer and OEM customer base from one platform. These are the practical reasons the RT-035F/R, as a hubset explicitly designed for lightweight road rim-brake wheel builds, deserves a specification-level reading rather than a glance at the weight figure alone.
What the RT-035F/R Specifies for Lightweight Builds
The headline figure is a total weight of approximately 336.6g per set. For a rim-brake road hubset, that number is worth recording as a starting point in the build weight budget, with the usual caveat that final wheelset weight depends on rims, spokes, nipples and assembly, and should be confirmed against the actual production configuration rather than assumed from the hub figure alone.
The spoke configuration is where the RT-035F/R makes its most specific claim. The front hub uses 20 holes in a 1:1 lacing arrangement, while the rear uses 24 holes in a 2:1 pattern. The 1:1 front layout keeps the two flanges symmetric in spoke count, which suits the relatively even tension environment at the front of a rim-brake wheel. The 2:1 rear layout assigns twice as many spokes to one side, a geometry that directly addresses the tension imbalance created by the freehub body occupying space on the drive side. For specifiers, this means the hubset arrives with a lacing intent already built in, reducing the guesswork of matching drilling to a target spoke tension profile.
The hubset uses straight-pull spokes, which changes how the wheelbuilder approaches the build: straight-pull designs avoid the bend at the spoke head and are chosen by many builders for consistent tension and a clean flange interface. Spoke availability in the required lengths and the builder's familiarity with straight-pull assembly are practical points to check before committing a production run.
Completing the specification, the hubset includes S&S steel bearings and ships with QR019 quick releases, matching the quick-release dropout standard of rim-brake road frames.
Materials, Engagement and Freehub Compatibility
The material split on the RT-035F/R is a deliberate division of labor. The hub shell is AL6061-T6 aluminum, a common choice for hub bodies where machinability, cost control and adequate strength matter. The axle, freehub body and end caps step up to high-strength AL7075 aluminum, placing the higher-strength alloy where loads concentrate: the axle carries rider weight and road shock, the freehub body transmits torque and takes the wear of cassette splines, and the end caps sit at the frame interface.
Inside the rear hub, a 4-pawl, single-tooth engagement system is specified for reliable power transfer and consistent drivetrain engagement. Pawl-based engagement is a well-established architecture in road hubs, and the 4-pawl arrangement distributes drive torque across multiple engagement points. Buyers should note that the stated engagement description does not include a degree-of-engagement figure, so any engagement-angle claim in marketing material should be verified with ARC directly rather than inferred.
Freehub compatibility covers Shimano HG and SRAM XDR, which is a meaningful specification for distributors and OEMs assembling a road range. Offering both standards from one hubset platform simplifies inventory planning and lets a wheelset brand address Shimano and SRAM 12-speed road drivetrains without a second hub model. The pairing of the stated 100mm front / 130mm rear spacing with these freehub options confirms the intended application: conventional quick-release rim-brake road frames, not disc-brake or thru-axle platforms.
Where ARC Fits as a Hub Manufacturing Partner
Specification sheets answer what a hubset is; the supplier behind the sheet answers whether it can be built repeatedly to that specification. ARC, the brand of Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China, specializing in the research, development, manufacturing and customization of high-performance hubs. Its stated OEM and ODM work serves bicycle brands, wheel manufacturers and distributors, with road bikes among its covered application areas alongside MTB, gravel and e-bikes.
That positioning matters for a rim-brake road hubset because the segment is specification-sensitive and often program-specific. A wheelset brand launching a lightweight rim-brake model typically needs a hub partner who can work from a defined brief—spoke drilling, lacing pattern, freehub standard, spacing—and support customization where the program requires it. ARC's stated capabilities in CNC machining, precision manufacturing and quality control are the relevant manufacturing context for a hubset whose shell, axle, freehub body and end caps are all machined aluminum components. Buyers evaluating the RT-035F/R for an OEM or ODM program can reasonably treat ARC as a candidate for discussion at the sample and specification stage, particularly where the brief centers on lightweight rim-brake road wheelsets rather than disc platforms.
What to Confirm Before Specifying
The RT-035F/R gives a clear specification baseline, but several points sit outside the published details and should be settled before a production decision.
- Build weight: the approximately 336.6g figure covers the hubset; confirm how it is measured (with or without quick releases) and calculate the complete wheelset weight against your target using your chosen rims and spokes.
- Spoke compatibility: straight-pull spokes require specific lengths and head designs; confirm the required spoke specification and availability with your spoke supplier before finalizing the build sheet.
- Freehub and drivetrain match: verify which freehub body is fitted to the sample you receive and confirm it matches the cassette standards in your program.
- Sample validation: request samples and run your own build and ride evaluation, including spoke tension balance on the 2:1 rear lacing and engagement feel under load.
- Customization scope: if the program needs specific drilling, spacing, finish or branding, confirm what ARC's OEM/ODM process can accommodate and at what stage tooling or specification changes apply.
- Commercial terms: MOQ, lead time, packaging and documentation requirements should be discussed directly with ARC, as these are program-specific and not part of the published product specification.
Read against a lightweight rim-brake wheelset brief, the ARC RT-035F/R offers a coherent package: 100/130mm spacing for rim-brake road frames, a 20H front 1:1 and 24H rear 2:1 drilling strategy aimed at tension balance, AL6061-T6 and AL7075 construction, 4-pawl engagement, dual HG/XDR freehub options and a stated 336.6g set weight. For wheelset brands, bicycle OEMs and distributors building in this segment, it is a hubset worth putting on the evaluation list and taking to the sample stage with ARC, where the remaining build-specific questions can be answered against your own wheelset program.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China