ARC RT-035F/R Road

ARC RT-035F/R Road Hub Set: What Rim-Brake Wheel Programs Get

17 min read
On this page 6 sections

Wheel builders planning a rim-brake road wheelset often reach a familiar sticking point: rim-brake frames and calipers are still widely supported, yet many current hub platforms have been optimized around disc-brake spacing and wider setups. For a lightweight rim-brake program, the hub still needs to deliver predictable spoke tension, dependable engagement, clean bearing life, and a straightforward fit to 100/130 mm frames. The ARC RT-035F/R Road Hub Set is the product ARC positions specifically for this kind of build, and its value comes from a compact, clearly specified configuration rather than a broad platform claim.

What the RT-035F/R Is Built For

The RT-035F/R is a road hub set intended for lightweight rim-brake wheel builds. That purpose has practical consequences for program planning: rim-brake road wheels typically prioritize low rotating mass, a narrow rear over-locknut dimension, conventional quick-release mounting, and a spoke lacing that keeps a shallow or mid-depth rim tracking well under braking and cornering loads.

The hub set combines a straight-pull spoke design with an AL6061-T6 aluminum hub shell, and uses high-strength AL7075 aluminum for the axle, freehub body, and end caps. Straight-pull spokes remove the J-bend at the hub flange, which can simplify spoke replacement and gives builders a defined flange geometry to work from. The material split is worth noting in a sourcing conversation: the shell is the structural body around which spoke tension is distributed, while the AL7075 components sit in the load path around the axle and freehub, where dimensional stability matters during pedaling and bearing preload setting.

For wheel program managers, this is the first filter. If the project is a rim-brake road wheelset with a defined target weight and a quick-release frame interface, the RT-035F/R belongs on the shortlist on specification grounds. If the project is disc-brake or uses thru-axles, this hub set is not the match.

Spoke Drilling and Lacing: 20H Front, 24H Rear

The RT-035F/R is drilled 20H front and 24H rear. The front uses a 1:1 lacing ratio, and the rear uses a 2:1 ratio.

Those numbers matter more than they might appear. A 20-hole front hub keeps the spoke count low for weight and aerodynamic cleanliness, and a 1:1 pattern splits driving and non-driving spokes evenly on the front wheel, which has no torque to transmit and mainly needs balanced lateral tension. The 24-hole rear with 2:1 lacing is the more consequential choice: on a rim-brake rear wheel, the hub has to transmit pedaling torque through the freehub into the spokes while the rim brake applies a separate braking load at the rim. A 2:1 pattern puts twice as many spokes on the torque-transferring side, which is how builders typically aim to keep drive-side tension higher and more even across the wheel.

ARC states that the 20H front 1:1 and 24H rear 2:1 configurations help optimize spoke tension distribution and wheel balance. For a wheel program, that translates into a build sheet question: which rim depth and spoke type will the program pair with this hub, and does the resulting tension balance meet the wheel brand's own build standard? The hub provides the drilling and ratio; final tension values still depend on rim, spoke gauge, and build method, so sample builds are the right place to confirm them.

Materials and Engagement

Beyond the shell and axle, the RT-035F/R uses a 4-pawl, single-tooth engagement system. ARC describes this as providing reliable power transfer and consistent drivetrain engagement.

For a road program, engagement behavior shows up in how the freehub picks up under load and how consistently it repeats across a production batch. A 4-pawl arrangement spreads drive load across multiple engagement points, and the single-tooth design refers to the tooth form on the drive ring that the pawls engage. What buyers should take from this is a defined, serviceable engagement architecture rather than an open-ended performance promise; exact engagement angle, pawl spring specification, and durability figures are not part of the published configuration and should be confirmed directly with ARC if they are decision criteria for the program.

The material choices also shape the freehub story. An AL7075 freehub body is used in place of a heavier alternative, which fits the lightweight brief, but it also makes freehub interface quality and cassette fit a legitimate sample-stage check, particularly with wide-range cassettes where individual sprocket loads are concentrated.

Fit and Compatibility: Spacing, Freehub, Bearings, Weight

The specification sheet is where most rim-brake programs either confirm or rule out a hub set, so it is worth reading as a checklist rather than a feature list.

SpecificationRT-035F/R
Front spacing100 mm
Rear spacing130 mm
Freehub optionsShimano HG and SRAM XDR
BearingsS&S steel bearings
Quick releasesQR019 included
Weightapprox. 336.6 g total

The 100 mm front and 130 mm rear spacing is the standard quick-release rim-brake road platform. This is the single clearest compatibility statement in the whole specification: the hub set is dimensioned for frames and forks built around rim brakes and quick-release dropouts, not for 142 mm thru-axle disc frames.

Freehub coverage of Shimano HG and SRAM XDR lets one hub platform serve both the Shimano/SRAM road cassette ecosystem and SRAM's XDR-based 12-speed road groups. For a wheelset brand selling into multiple drivetrain markets, that reduces the number of distinct hub variants needed in the line. It does not, however, cover Campagnolo freehub standards, so programs targeting that ecosystem should treat it as out of scope for this hub set.

S&S steel bearings are specified for the hub set. Steel remains a conventional and serviceable choice for road hubs, and the bearing specification is one of the items worth verifying at sample stage against the program's own bearing-life expectations rather than assuming a service interval.

At approximately 336.6 g for the set, the RT-035F/R sits in a weight class that suits lightweight rim-brake builds. Weight should be read together with the drilling and material choices above, since those are what allow a low spoke count without abandoning tension balance. Included QR019 quick releases mean the hub set arrives with the matching quick-release hardware for a rim-brake build, which simplifies the bill of materials for a complete wheelset program.

Working With ARC on a Rim-Brake Wheel Program

ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China, focused on research, development, manufacturing, and customization of high-performance hubs. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers, and distributors across MTB, road, gravel, and e-bike categories. Its stated production base includes CNC machining, precision manufacturing, engineering expertise, and quality control systems.

For a rim-brake road wheel program, that combination is relevant at the points where the RT-035F/R specification meets a builder's own requirements. The hub set defines the drilling, spacing, freehub standards, engagement architecture, and weight; the OEM/ODM conversation is where a wheel brand or distributor can align freehub configuration, branding, and packaging with the program's build sheet. Because this hub set is documented around Shimano HG and SRAM XDR, programs that need one of those standards have a direct starting point, while programs requiring other freehub standards should raise that early rather than assume coverage.

The practical next step is sample evaluation. Build the RT-035F/R into the intended rim and spoke combination, check spoke tension balance with the 20H/24H 1:1 and 2:1 lacing, confirm freehub and cassette fit, and verify bearing feel and quick-release seating against the frame. Buyers whose programs are lightweight, rim-brake, and quick-release-based will find the RT-035F/R a well-defined hub set to evaluate, and ARC's OEM/ODM capability is the right channel for turning that evaluation into a production specification.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China