Freehub Standard

Boost e-MTB Hub Set Ordering Checklist: Axle Spacing, Freehub Standard and Bearing Options

17 min read
On this page 6 sections

Buying a Boost e-MTB hub set is less about picking a name from a catalog and more about signing off three specifications that cannot be changed later without scrapping tooling, spokes or a frame interface. Axle spacing, freehub standard and bearing specification are the items that decide whether a hub set drops into an existing e-MTB platform or becomes a rework problem at the sample stage. The ARC MT-098F/R Boost e-MTB hub set is a useful worked example because its stated configuration — 15×110mm front, 12×148mm rear, Shimano HG/Micro Spline/SRAM XD freehub compatibility and S&S steel bearing options — maps directly onto the three decisions a buyer has to confirm.

Start With the Frame and Fork, Not the Hub

The first ordering mistake is usually treating "Boost" as a single number. It is a pair. A Boost e-MTB frame expects 12×148mm at the rear, and a Boost fork expects 15×110mm at the front. Both must be confirmed from the frame and fork drawings before any hub is specified, because a hub that matches the rear dropout but not the fork leaves the buyer with a wheel that cannot be mounted.

Read the axle standard in full: diameter, spacing and the axle interface the frame designer intended. On e-MTB platforms, rear spacing is also affected by motor and drive-unit packaging, so the dropout drawing should be treated as the authority rather than a general Boost assumption. The ARC MT-098F/R is stated with 15×110mm front and 12×148mm rear spacing, which corresponds to the mainstream Boost e-MTB format — but the buyer's job is still to verify that their own frame and fork call for exactly that pairing.

A practical check is to write the two figures side by side in the purchase specification — front spacing and rear spacing — and have the frame or product engineer initial them. This turns "Boost" from a marketing shorthand into a dimension that can be quoted back to the supplier without ambiguity.

Match the Freehub Standard to the Drivetrain

Freehub standard is the second irreversible decision. Shimano HG, Shimano Micro Spline and SRAM XD are distinct interfaces, and a hub ordered with one cannot be converted to another by changing a cassette. The drivetrain group — cassette model, number of speeds and intended gearing range — should be fixed before the hub order is placed.

The order matters because freehub choice cascades into other decisions: the cassette's smallest cog and its clearance, the chainline the frame designer has allowed for, and whether the chosen groupset is even offered in the requested interface. Buying hubs first and choosing a drivetrain later is a common route to a mismatch that only surfaces when the cassette is test-fitted.

For buyers working across several e-MTB models, the useful question is whether the hub platform offers more than one freehub option so a single hub family can serve different builds. ARC states compatibility with Shimano HG, Micro Spline and SRAM XD freehub standards on the MT-098F/R, which means the freehub is a selectable order attribute rather than a fixed feature. That flexibility is worth confirming explicitly in writing — which standard, for which model year, for which cassette — rather than assuming the supplier will infer it. ARC's OEM/ODM work with bicycle brands and wheelset builders makes this kind of specification-level dialogue a normal part of the order process rather than an exception.

Agree Bearing Specification in Writing

Bearing choice is the item most often left to the supplier's default. That is a weak position for an e-MTB hub set, because the motor-assisted load profile and the higher typical rider-and-bike mass put different demands on bearings than a conventional mountain bike hub.

The order document should state the bearing type, the bearing count per hub, and whether the specification is fixed or open to substitution. If the buyer has a preference — steel versus another material, sealed versus serviceable, a named grade — it belongs in the specification, not in a verbal understanding. If the buyer has no preference, the supplier's proposal should still be written down and accepted, so that a later production batch can be compared against the same baseline.

The ARC MT-098F/R is offered with S&S steel bearing options. For purchasing managers, the word "options" is the operative part: it signals that bearing specification is a selectable parameter to be agreed at order stage, and the buyer should confirm which option is being quoted before comparing prices across suppliers. Two quotations that look alike on paper can differ entirely in bearing specification, which is why the bearing line should sit alongside axle spacing and freehub standard in the same sign-off table rather than in a separate technical annex.

Lock the Remaining Build Details Before Sampling

Once the three core items are settled, the remaining build details should be confirmed in the same document so they are not renegotiated later. For the MT-098F/R, that means 28H front and rear drilling, the Center Lock disc brake interface, and the straight-pull spoke structure. Each carries a downstream consequence: 28H determines the spoke count and rim drilling the wheel builder must plan for, Center Lock dictates the rotor mounting type, and straight-pull construction affects spoke availability and lacing workflow.

Weight belongs in the same conversation, but it should be read correctly. ARC states a total weight of approximately 408.6g for the set, and the word "approximately" should be carried into the buyer's own documentation rather than rounded down into a hard target. Stated weight is a reference figure for the specification sheet, not a verified performance guarantee for a given production batch.

The engagement system is worth noting for e-MTB use: the hub set uses a 4-pawl, single-tooth engagement design stated at 48-point engagement. Buyers comparing hub sets for assisted mountain bikes should record this as a stated product characteristic and, where it matters to the ride feel or the brand's positioning, ask how it will be verified on the sample rather than assuming identical behavior across suppliers.

A Checklist to Take Into the Supplier Conversation

The value of a checklist is that it converts a diffuse conversation into a set of items that can be confirmed, quoted and sampled. Before requesting a sample of a Boost e-MTB hub set, the buyer should be able to state:

  • Front spacing, rear spacing, and the frame and fork drawings that establish them
  • Freehub standard matched to a named cassette and drivetrain group
  • Bearing type, count and whether the specification is fixed
  • Spoke drilling, rotor interface and axle interface
  • Stated weight, recorded as an approximate reference

Applied to the ARC MT-098F/R, that checklist resolves into 15×110mm front and 12×148mm rear Boost spacing, a freehub selected from Shimano HG, Micro Spline or SRAM XD, S&S steel bearing options, 28H drilling, Center Lock mounting and a stated set weight of approximately 408.6g. The buyer's task is not to accept those figures as a match, but to confirm that each one corresponds to their own frame, drivetrain and wheel program.

For purchasing managers and wheel builders moving from a shortlist to a sample order, this three-point sign-off is the practical filter. A hub set whose spacing, freehub and bearing specification are all documented and mutually consistent is one that can be sampled and validated without reopening the specification. ARC's position as a hub manufacturer serving OEM and ODM programs, with the MT-098F/R built around Boost e-MTB spacing and multiple freehub options, makes it a reasonable candidate to include when that sign-off is being prepared — particularly for buyers who want the freehub standard and bearing specification treated as explicit order parameters rather than supplier defaults.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China