OEM Wheel Programs

Carbon-Spoke Road Disc Hub Sets for OEM Wheel Programs: What ARC Manufactures

18 min read
On this page 6 sections

Wheel program managers specifying a carbon-spoke road disc wheelset face a narrow problem: most hubs on the market were designed around steel spokes and then adapted to carbon. That adaptation shows up as oversized or reamed spoke holes, uncertain T-head seating, and lacing patterns that put load into the flange in ways the original design never anticipated. The result is a hub that works on paper but demands extra verification at the build stage.

The ARC MT-116F/R carbon-spoke Center Lock road disc hub set is a useful reference point precisely because it was designed around carbon spokes from the start. ARC, the Taicang-based hub manufacturer founded in 2013, lists it as a 20H/21H set engineered for ultra-lightweight road disc carbon wheel builds. For OEM and ODM programs, the practical question is not whether the hub is light, but whether its interface, axle standards and drivetrain options line up with the wheel line being planned. This overview works through those specification points so buyers know what to confirm before sampling.

Why Carbon-Spoke Wheel Programs Need a Purpose-Built Hub Interface

Carbon spokes behave differently from steel. They are typically wider at the T-head, stiffer in tension, and less forgiving of hole geometry that does not match the head profile. When a hub flange is machined for a generic spoke hole, the fit can introduce point loading, inconsistent seating depth and variable tension readings during the build. For a production wheel program, that variability translates into more build time, more re-truing and a narrower window of acceptable tension.

Lacing layout matters as much as hole geometry. A 1:1 pattern distributes drive and braking torque evenly across both flanges, while a 2:1 pattern concentrates spoke count on the drive side to handle torque transfer. Carbon-spoke wheelsets are often designed around one or the other depending on the rim's stiffness target and the intended spoke tension balance. A hub that only supports one layout limits the wheel designer's options before the rim is even chosen.

This is the context in which ARC's product positioning is relevant: the MT-116F/R is described as engineered for carbon wheel builds, with a dedicated T-head interface rather than a converted steel-spoke flange. For a program manager, that is the first filter — does the hub interface match the spoke the program intends to use?

Inside the MT-116F/R: Spoke Interface, Materials and Drive System

The MT-116F/R carries a precision-forged AL6061-T6 aluminum hub shell, paired with AL7075 axles, freehub body and end caps. That material split is a common and sensible one in performance hubs: a forged aluminum shell keeps weight down while providing a stable flange structure, and the higher-strength 7075 alloy is reserved for the load-bearing axle and freehub components.

The spoke interface is the defining feature. The hub supports both 1:1 and 2:1 spoke configurations, so wheel builders can choose a layout based on spoke tension, wheel stiffness and their own design requirements. The dedicated T-head holes accommodate compatible carbon spokes in 3.3mm and 5.2mm widths. That two-width coverage is worth noting for programs that are still deciding between spoke suppliers — it widens the range of compatible carbon spokes without changing the hub.

The drive system uses ARC's patented one-piece ratchet architecture, offered in 36T and 54T versions. Engagement tooth count is a program decision rather than a universal best: 36T gives a coarser engagement with fewer teeth in mesh per revolution, while 54T offers finer engagement. ARC states the design is intended for consistent engagement, efficient torque transfer and reliable load distribution. Buyers should confirm which ratchet option is specified for their build rather than assume either is standard.

Axle, Brake and Drivetrain Fit for Road Disc Frames

For a road disc program, frame standards are usually fixed before the hub is chosen, so integration is a pass/fail check. The MT-116F/R uses a Center Lock disc brake interface with 12×100mm front and 12×142mm rear thru-axle spacing — the current mainstream road disc standard. Programs built around older quick-release frames or non-standard spacing would fall outside this hub's stated configuration.

Drivetrain compatibility is broader. The hub supports five freehub standards: Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed. In practice, that means one hub model can serve multiple complete-bike spec levels and aftermarket wheel lines without a separate hub design for each groupset family. For an OEM building the same wheelset across Shimano, SRAM and Campagnolo spec tiers, that flexibility reduces part-number sprawl.

Two points deserve confirmation during sampling. First, that the specified freehub standard matches the groupset the program will actually ship with — the five options are distinct parts, not interchangeable at the point of assembly. Second, that the Center Lock mount and thru-axle spacing match the frame and fork drawings, including any rotor-lockring clearance requirements.

Bearing and Weight Choices That Stay Within One Model

Bearing selection is one of the clearest customization levers inside a single hub model. The MT-116F/R is offered with S&S steel, ENDURO and CeramicSpeed bearing options. These represent different positions on the cost-versus-friction spectrum rather than a single specification, so a program can position an entry build and a premium build around the same hub platform. Buyers should confirm which bearing option corresponds to the price tier they are quoting, since the choice affects both bill of materials and the performance story told to the end customer.

ARC states a complete hub set weight of approximately 281.1g for the MT-116F/R. As with any hub weight figure, it should be read as a reference for the set as configured, not a guarantee for every bearing, ratchet and freehub combination. Weight-sensitive programs should ask ARC to confirm the figure for the exact specification being ordered. The same caution applies to any weight claim in a wheel program: the hub is one input, and rim, spoke count and nipples will dominate the final wheelset weight.

What the OEM/ODM Relationship Covers With ARC

ARC's stated business is the research, development, manufacturing and customization of high-performance bicycle hubs, with OEM and ODM solutions provided to bicycle brands, wheel manufacturers and distributors across mountain bike, road, gravel and e-bike categories. The company cites CNC machining, precision manufacturing, engineering expertise and quality control systems as the basis of its hub production.

For a carbon-spoke road disc program, the relevant question is where that customization scope begins and ends. The MT-116F/R already covers a defined set of variables — spoke layout, two carbon-spoke widths, two ratchet tooth counts, five freehub standards and three bearing options. A program that fits within those variables can be specified directly from the model. A program that needs something outside them should raise it with ARC as a development question rather than assume it is covered.

That distinction matters for procurement planning. Before committing to a sample, a buyer should confirm the exact configuration in writing: spoke width and lacing, ratchet tooth count, freehub standard, bearing option and the confirmed set weight for that build. It is also reasonable to ask how the hub is validated for carbon-spoke tension and how quality is checked on the flange and ratchet interfaces, since those are the features the wheel's durability depends on. ARC's OEM/ODM framing is the right starting point for those conversations, but the specific terms — tooling, minimum quantities, lead times and validation documentation — are program-specific and should come from ARC directly.

For brands and wheel builders evaluating a carbon-spoke road disc hub, the MT-116F/R is a credible candidate to shortlist: it is a named, documented model with a carbon-specific spoke interface, current road disc axle standards and genuine drivetrain and bearing flexibility within one platform. The productive next step is a specification review against the intended rim, spoke and groupset, followed by a sample build to verify tension consistency and flange fit under the program's actual build process.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China