Track and fixed-gear wheel programs live or die on details that are easy to overlook at the catalog level: how the sprocket is mounted, whether the hub can serve more than one build configuration, and what comes in the box. The ARC GT-010F/R Track Bike Hub is aimed squarely at those questions, combining CNC-machined construction with double-sided fixed-gear threading, movable flange nuts, and a supplied 16T cog and lockring. For brands, wheelset builders, and distributors evaluating hub specifications for fixed-gear and track wheels, the more useful exercise is understanding what each of those features actually changes on the bench and in the build plan.
Why Double-Sided Threading Matters on a Fixed-Gear Hub
Threading on both sides of a fixed-gear hub is not a cosmetic detail. It determines where a sprocket can sit relative to the hub shell, and therefore how a builder controls chainline and how many drivetrain options a single hub shell can support.
A conventional single-side threaded hub locks the drivetrain into one flange orientation and one chainline position. The GT-010F/R's dual-sided fixed-gear threading gives the builder a second threaded position to work with. In practice, that means a sprocket can be mounted on either side of the hub shell, which is useful when a frame's rear spacing, chainstay clearance, or intended gear position calls for the drive side to be placed differently than a default layout would allow. For programs that produce more than one fixed-gear model, this reduces the number of distinct hub shells that need to be stocked: one hub family can cover builds that would otherwise require separate parts.
The threading configuration only does its job if the mating components are compatible. Sprocket thread pitch and lockring engagement should be confirmed against the hub's actual threading before a production run is committed, and this is one of the first specification questions a buyer should settle with the supplier. ARC manufactures the GT-010F/R specifically for track cycling and fixed-gear applications, so the threading is presented as a fixed-gear feature rather than a general-purpose thread that happens to be present.
Movable Flange Nuts and Wheel-Build Flexibility
The movable flange nuts are the second feature that separates this hub from a fixed-geometry design. Flange position influences spoke angles, bracing geometry, and how a wheel is laced, so an adjustable flange arrangement lets a builder tune the hub to a chosen rim, spoke count, and lacing pattern rather than forcing the wheel design to accommodate a rigid hub.
For custom wheel builders, this is a practical advantage during prototyping: a single hub can be evaluated with more than one flange setting before a final specification is locked in. For brands planning a small family of fixed-gear wheelsets, movable flanges allow the same hub platform to serve builds that differ in rim depth, spoke count, or intended use, which simplifies sourcing and spare-parts planning.
It is worth being precise about what movable flange nuts do and do not establish. They create configuration options; they do not, by themselves, guarantee a particular stiffness, weight, or durability outcome. Those results depend on the complete wheel — rim, spokes, lacing, tension, and tire — and on how the hub is assembled. Buyers should treat flange adjustability as a design variable to be validated in a sample build, not as a performance claim.
The 16T Cog, Lockring and Bearing Layout in Practice
The GT-010F/R is supplied with a 16T fixed-gear sprocket and a lockring, which matters for procurement because it removes a separate sourcing step for the drivetrain interface. The lockring is the component that secures the sprocket against the hub's threading under the reversing loads typical of fixed-gear riding, so its inclusion and correct engagement are part of the hub's function rather than an accessory.
Tooth count is a gearing decision. A 16T cog sets a specific starting point for the drivetrain ratio, and the right choice depends on the rider's cadence target, the frame's chainring size, and the intended terrain or track discipline. Buyers specifying this hub for a production wheelset should confirm that 16T matches their target ratio range, or plan for sprocket substitution where the program requires a different tooth count — and should verify with ARC what options are available before committing.
The stated bearing configuration is a front 2-bearing and rear 4-bearing layout. More bearings at the rear is a common approach on fixed-gear hubs because the rear hub carries the drivetrain loads and the wider spacing. The count itself is a configuration fact; it does not on its own establish load ratings, service life, or friction characteristics. Those depend on bearing grade, seals, preload, and assembly quality, and buyers should ask about bearing specification and serviceability rather than infer performance from the count alone.
Materials and What Buyers Should Confirm Before Ordering
The stated materials are a fully CNC-machined AL6061-T6 aluminum hub shell, a hollow CR-MO chromoly steel axle, and AL7075 aluminum side covers. Read together, they describe a hub built around an aluminum shell and covers with a steel axle — a combination that separates the structural and load-bearing role of the axle from the weight-sensitive shell. CNC machining is the stated production method for the shell, which is consistent with the dimensional control that threaded and flanged interfaces require.
Those material facts support a reasonable expectation of a purpose-built component, but they are not a performance guarantee. Before an OEM or ODM order is placed, buyers should settle a defined list of questions:
- Threading specification: exact thread type and pitch on both sides, and lockring thread compatibility.
- Flange and spacing geometry: the range of flange positions the movable nuts allow, and the axle spacing/OLN dimensions offered.
- Cog options: whether 16T is fixed for the program or whether other tooth counts can be supplied.
- Bearing specification: bearing grade, seals, and whether bearings are serviceable or pressed in.
- Axle and finish details: axle length options, side cover finish, and any anodizing or laser marking for branding.
- Sample validation: a sample build to confirm chainline, spoke angles, and lockring engagement on the intended rim and frame.
- Order terms: MOQ, lead time, packaging, and documentation — to be confirmed with ARC directly rather than assumed.
ARC's role here is as a hub manufacturer with OEM and ODM capability for bicycle brands, wheel manufacturers, and distributors, which is the relevant fit for buyers who need the GT-010F/R adapted to a specific program rather than purchased as a stock item. The ARC GT-010F/R Track Bike Hub is the reference point for those discussions.
For a fixed-gear or track wheel program, the GT-010F/R is worth putting on the evaluation list when the build plan benefits from dual-sided threading, adjustable flange positioning, and a supplied 16T cog with lockring — and when the buyer is prepared to validate threading, spacing, and bearing details against their own frame and rim choices. Those are the points where the hub's stated features translate into a workable specification, and where a direct conversation with ARC about customization and sample validation will settle more than any catalog page can.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China