The freehub standard is the specification item on the ARC MT-084F/R that most directly ties the hub set to the rest of the drivetrain, and it should be fixed before the order is placed rather than corrected afterwards. The MT-084F/R does not present a single interface with adapters to be resolved later: it is offered with three freehub standards — Shimano HG, Micro Spline and SRAM XD — and choosing among them is a cassette-interface decision made at the specification stage.
What "Comparing Freehub Standards" Actually Means for This Hub Set
On this hub set, comparing freehub standards is not a ranking exercise. The three options are alternative configurations of the same model, not three different hubs with different performance claims. The comparison begins with one question: which cassette does the wheel build need to accept?
That framing matters for wheel builders, wheelset brands and OEM/ODM buyers working from a drivetrain specification. The freehub body is the mechanical link between the cassette and the hub shell, so its standard determines which cassette families can be mounted at all. A cassette that does not match the specified freehub cannot be made to fit by adjusting spoke tension, axle spacing or brake interface. Because ARC builds the MT-084F/R to order in the chosen configuration, the standard is settled during specification, and the cassette and drivetrain should be confirmed at the same time.
The three offered standards cover the main MTB cassette ecosystems. Shimano HG is the long-established interface; Micro Spline is Shimano's newer MTB-specific spline pattern; SRAM XD is SRAM's MTB freehub interface. Each belongs to a particular cassette family, and the cassette, not the hub, is the starting point.
Matching Each Standard to the Cassette and Drivetrain
The practical method is to work backwards from the cassette the wheel build will carry, then verify the drivetrain, then lock the hub configuration.
Start with the cassette model and its mounting interface, not the groupset name. Cassette families within one brand can use different interfaces, and a groupset label alone does not always settle the question. Ask the cassette supplier or check the product documentation for the exact freehub interface required.
Then confirm the rest of the drivetrain is consistent with that cassette: derailleur and shifter compatibility, and the intended gear range. The freehub does not change the frame-side constraints, but a cassette that suits the freehub yet falls outside the drivetrain's supported range is still a mismatch.
Shimano HG. This is the right choice when the build uses an HG-interface MTB cassette. It is the interface most buyers already know, so it is often the reference point when a wheelset program spans several cassette options.
Micro Spline. This applies to Shimano MTB cassettes that use the Micro Spline interface. When the drivetrain is built around a Micro Spline cassette, specifying Micro Spline on the MT-084F/R keeps the hub and cassette on the same standard.
SRAM XD. This is the interface for SRAM XD MTB cassettes. Builds centred on an XD cassette should be specified with the XD freehub so the cassette mounts as designed.
For ARC, this is a routine configuration point rather than a special request. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, and the MT-084F/R is offered with all three standards, so a wheelset program serving several drivetrain specifications can stay on one hub model and vary only the freehub. That keeps frame fit, spoke drilling and brake interface consistent across the range while the cassette interface changes per build.
What Stays the Same Regardless of Freehub Choice
The freehub choice should not be confused with the other specification items on the MT-084F/R, because most of the hub set is fixed.
The Boost platform is fixed: 15×110mm front and 12×148mm rear thru-axle spacing. The Center Lock disc brake interface is fixed. The straight-pull design with 28H front and rear drilling is fixed. The hub shell is forged AL6061-T6 aluminum, with high-strength AL7075 used for the axle, freehub body and end caps, and the patented one-piece ratchet architecture is shared across configurations. None of these change with the freehub standard, so they can be confirmed independently and should not be renegotiated as part of the freehub decision.
Two items, however, are selectable within the same model and must be stated explicitly alongside the freehub. The one-piece ratchet is available in 36T and 54T configurations. Bearings are offered in S&S steel and ceramic options. Because these are configuration choices rather than defaults visible from the model name, an order that names only the freehub standard leaves the ratchet tooth count and bearing option open. The listed weight of approximately 361.1g per set is a reference figure for the model; buyers should confirm the figure for their exact configuration rather than assume it applies unchanged to every combination.
A Short Pre-Order Checklist
Before the MT-084F/R is ordered, the specification should answer these points in writing:
- Cassette interface confirmed against the cassette documentation — HG, Micro Spline or XD.
- Drivetrain checked for derailleur and shifter compatibility and the intended gear range.
- Boost spacing verified on the frame: 15×110mm front and 12×148mm rear thru-axle.
- Brake interface confirmed as Center Lock.
- Drilling confirmed at 28H front and rear, straight-pull.
- Ratchet specified as 36T or 54T.
- Bearing option specified as S&S steel or ceramic.
- Weight expectation checked against the exact configuration.
For buyers comparing suppliers, this checklist also serves as a test of how a hub manufacturer handles specification. A supplier that treats the freehub as a configuration item and asks for the cassette, ratchet and bearing choices together is easier to work with than one that lists a single standard and leaves the rest to be resolved later. ARC's MT-084F/R is structured around that kind of configuration conversation — one hub model, three freehub standards and selectable ratchet and bearing options — which makes it a practical candidate for wheel builders and OEM/ODM buyers who need to keep a hub platform consistent while matching different cassette ecosystems. The detail page for the ARC MT-084F/R 28H Straight-Pull Boost Center Lock MTB Hub Set is the place to confirm the specification before the order is fixed, with the cassette interface settled first and the remaining options recorded alongside it.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China